journal article·2019-12

Thin metallic wave-like channel bipolar plates for proton exchange membrane fuel cells: Deformation behavior, formability analysis and process design

Xia'nan Li, Shuhuai Lan, Zhutian Xu, Tianhao Jiang, Linfa Peng

Publisher page

Abstract

Abstract Metallic bipolar plates are one of the main components of proton exchange membrane fuel cells, and the selection of channel layout is a key point for the design of metal bipolar plate which affects both the performance and the manufacturability of bipolar plates directly. Among various design proposals, the wave-like channel is found as a promising layout to enhance the performance of the fuel cell stack. However, the forming rules of this channel layout are unclear and still to be investigated. In this paper, the influences of the various factors of die sets on the forming behavior of the wave-like channel are explored through experiments. The rules derived from experiments are verified by simulation and summarized as the empirical rule of thickness reduction and maximum pressing depth. For 316 stainless steel sheet, fracture occurs when the thickness reduction reaches around 30%. Before fracture, the relationship between the thickness reduction and the pressing depth can be described as an empirical exponential formula. Finally, guidance is also provided for the die set design of wave-like channels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Corrosion Behavior and Inhibition · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Mathematical analysis of fuel cell strategic technologies development solutions in the automotive industry by the TOPSIS multi-criteria decision making method10.1016/j.ijhydene.2010.07.064 ↗
2. Technical, environmental and exergetic aspects of hydrogen energy systems10.1016/S0360-3199(01)00119-7 ↗
3. Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates10.1016/j.enconman.2018.05.069 ↗
4. A comprehensive review on hybrid power system for PEMFC-HEV: issues and strategies10.1016/j.enconman.2018.06.065 ↗
5. High-performance membrane-electrode assembly with an optimal polytetrafluoroethylene content for high-temperature polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2016.05.042 ↗
6. Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2014.08.113 ↗
7. Review of bipolar plates in PEM fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
8. Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review10.1016/j.ijhydene.2012.07.076 ↗
9. Flow-field designs of bipolar plates in PEM fuel cells: theory and applications10.1002/fuce.201200074 ↗
10. Main factors affecting the lifetime of Proton Exchange Membrane fuel cells in vehicle applications: a review10.1016/j.apenergy.2014.03.048 ↗
11. Effects of flow field design on water management and reactant distribution in PEMFC: a review10.1007/s11581-016-1644-y ↗
12. Flow field bipolar plates in a proton exchange membrane fuel cell: analysis & modeling10.1016/j.enconman.2016.10.053 ↗
13. Analysis of the flow distribution for thin stamped bipolar plates with tapered channel shape10.1016/j.ijhydene.2016.01.073 ↗
14. Three-dimensional numerical study on cell performance and transport phenomena of PEM fuel cells with conventional flow fields10.1016/j.ijhydene.2007.09.005 ↗
15. Pressure losses in laminar flow through serpentine channels in fuel cell stacks10.1016/j.jpowsour.2004.06.025 ↗
16. Matsunaga · 2009
17. Numerical investigation of liquid water dynamics in wave-like gas channels of PEMFCs
18. Fabrication of micro-channel arrays on thin stainless steel sheets for proton exchange membrane fuel cells using micro-stamping technology10.1007/s00170-012-4107-2 ↗
19. Investigations on the variation of corrosion and contact resistance characteristics of metallic bipolar plates manufactured under long-run conditions10.1016/j.ijhydene.2011.08.067 ↗
20. Fabrication of stainless steel bipolar plates for fuel cells using dynamic loads for the stamping process and performance evaluation of a single cell10.1016/j.ijhydene.2014.04.103 ↗
21. Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments10.1016/j.enconman.2018.08.070 ↗
22. Fabrication of metallic bipolar plate for proton exchange membrane fuel cells by rubber pad forming10.1016/j.jpowsour.2009.12.046 ↗
23. Investigation of micro/meso sheet soft punch stamping process - simulation and experiments10.1016/j.matdes.2008.05.074 ↗
24. Studies of the deformation styles of the rubber-pad forming process used for manufacturing metallic bipolar plates10.1016/j.jpowsour.2010.06.078 ↗
25. The fabrication of a micro-channel for metallic bipolar plates using a rubber pad forming process10.4028/www.scientific.net/KEM.626.16 ↗
26. Fabrication of aluminum 1050 micro-channel proton exchange membrane fuel cell bipolar plate using rubber-pad-forming process10.1007/s00170-012-4162-8 ↗
27. Fabrication of micro-flow channels for metallic bipolar plates by a high-pressure hydroforming apparatus10.1016/j.jpowsour.2012.01.112 ↗
28. Modeling of microchannel hydroforming process with thin metallic sheets10.1115/1.4006180 ↗
29. Effect of manufacturing processes on formability and surface topography of proton exchange membrane fuel cell metallic bipolar plates10.1016/j.jpowsour.2010.03.018 ↗
30. Commercialization of fuel cell bipolar plate manufacturing by electromagnetic forming
31. Corrugated bipolar sheets as fuel distributors in PEMFC10.1016/j.ijhydene.2006.03.004 ↗
32. Studies on the fabrication of metallic bipolar plates - using micro electrical discharge machining milling10.1016/j.jpowsour.2010.10.001 ↗
33. Simulation and fabrication of micro-scaled flow channels for metallic bipolar plates by the electrochemical micro-machining process10.1016/j.jpowsour.2008.07.087 ↗
34. Comparison of formabilities of stainless steel 316L bipolar plates using static and dynamic load stamping10.1007/s00170-014-5986-1 ↗
35. Effect of stamping load variation on deformation behaviour of stainless steel thin plate with microchannel10.1177/0954405412462673 ↗
36. Effect of manufacturing processes on contact resistance characteristics of metallic bipolar plates in PEM fuel cells10.1016/j.ijhydene.2011.06.091 ↗
37. Fabrication of metallic bipolar plates for proton exchange membrane fuel cell by flexible forming process-numerical simulations and experiments10.1115/1.3207870 ↗
38. Formability evaluation of stainless steel bipolar plate considering draft angle of die and process parameters by rubber forming10.1007/s12541-014-0417-7 ↗
39. Effect of process parameters on forming depth of channels in fuel cell bipolar plates fabricated using rubber forming process10.1179/1432891714Z.000000000461 ↗
40. Numerical investigation of formed residual stresses and the thickness of stainless steel bipolar plate in PEMFC10.1016/j.ijhydene.2016.03.005 ↗
41. Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell10.1016/j.jpowsour.2007.12.037 ↗
42. Improving channel depth of stainless steel bipolar plate in fuel cell using process parameters of stamping10.1007/s00170-016-8606-4 ↗
43. Investigation of stamping process of metallic bipolar plates in PEM fuel cell-Numerical simulation and experiments10.1016/j.ijhydene.2014.01.201 ↗
44. Fabrication of aluminum bipolar plates by semi-solid forging process and performance test of TiN coated aluminum bipolar plates10.1002/fuce.201300137 ↗
45. Effect of channel geometry on formability of 304 stainless steel bipolar plates for fuel cells-simulation and experiments10.1115/1.4031538 ↗
46. A review of composite and metallic bipolar plates in proton exchange membrane fuel cell: materials, fabrication, and material selection10.1016/j.jpowsour.2014.04.081 ↗