Improving the performance of sulphur doped LiMn2O4 by carbon coating
Source abstract
Abstract
Abstract Sulphur-doped spinel LiMn2O3.99S0.01 is a promising cathode material for lithium-ion batteries. It can be obtained in a form of nanocrystals by a facile, eco-friendly and water-based sol-gel synthesis. In this work, LMOS was successfully coated with a 2–3 nm conductive carbon layer fabricated from pyrolysis of modified poly(N-vinylformamide) - water-soluble polymer precursor. Carbon coated material exhibits greatly increased performance under high currents and improved cyclability in long-term charge-discharge tests. Pristine and carbon-coated samples are characterized by X-ray diffraction, thermogravimetric analysis, elemental analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. Electrochemical performance of the materials is examined by galvanostatic charge-discharge tests, cyclic voltammetry and electrochemical impedance spectroscopy. Carbon coated sample present a highly enhanced rate capability, withstanding up to 100C rate and maintaining up to 67.5% of initial 1C discharge capacity at 50C rate (1C - 148 mA g−1 – current required to fully charge a cell in time of 1 h). Li+ ion apparent diffusion coefficient in carbon coated sample is approximately twice increased. Electrochemical impedance spectroscopy has shown, that carbon coating decreases internal resistances of the cell caused by material passivation and charge-transfer reactions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
3. A review on nanocomposite materials for rechargeable Li-ion batteries10.3390/app7070731 ↗
4. Energy storage systems for transport and grid applications10.1109/TIE.2010.2076414 ↗
5. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
6. Functional materials for rechargeable batteries10.1002/adma.201003587 ↗
7. Integrated and sustainable solutions for Li-ion energy storage systems10.1016/bs.adioch.2018.05.007 ↗
8. A mechanically robust and highly ion-conductive polymer-blend coating for high-power and long-life lithium-ion battery anodes10.1002/adma.201403880 ↗
9. Enhanced electrochemical performance of MoO3-coated LiMn2O4 cathode for rechargeable lithium-ion batteries10.1016/j.matchemphys.2017.07.007 ↗
10. Enhancement of electrochemical performance of LiMn2O4 spinel cathode material by synergetic substitution with Ni and S
11. Enhancing the lithium ion diffusivity in LiMn2O4−ySy cathode materials through potassium doping10.1016/j.ssi.2018.01.014 ↗
12. Synthesis and characterisation of sulphided lithium manganese spinels LiMn2O4-ySy prepared by sol-gel method10.1016/j.ssi.2005.04.021 ↗
13. Optimization of sulphur content in LiMn2O3-ySy spinels as cathode materials for lithium-ion batteries10.1016/j.proeng.2014.12.482 ↗
14. Improved electrochemical performance of LiMn2O4 surface-modified by a Mn4+-rich phase for rechargeable lithium-ion batteries10.1016/j.electacta.2016.05.075 ↗
15. Novel AlF3surface modified spinel LiMn1.5Ni0.5O4 for lithium-ion batteries: performance characterization and mechanism exploration10.1016/j.electacta.2015.01.145 ↗
16. An attempt to improve electrical conductivity of the pyrolysed carbon-LiMn2O4-ySy (0 ≤ y ≤ 0.5) composites10.1016/j.jpowsour.2007.06.117 ↗
17. Improving the performance of high voltage LiMn1.5Ni0.5O4 cathode material by carbon coating10.1016/j.jpowsour.2014.08.015 ↗
18. Flame co-synthesis of LiMn2O4 and carbon nanocomposites for high power batteries10.1016/j.jpowsour.2008.10.002 ↗
19. Enhanced rate performance of carbon-coated LiNi0.5Mn1.5O4 cathode material for lithium ion batteries10.1016/j.electacta.2010.12.109 ↗
20. Enhancing the performances of Li-ion batteries by carbon-coating: present and future10.1039/C1CC14764A ↗
21. Direct preparation of conductive carbon layer (CCL) on alumina as a model system for direct preparation of carbon coated particles of the composite Li-ion electrodes10.1016/j.ssi.2007.12.034 ↗
22. M. Molenda, R. Dziembaj, A. Kochanowski, E. Bortel, M. Drozdek, Z. Piwowarska; „Process for the Preparation of Conductive Carbon Layers on Powdered Supports”; PAT.216549; US vol. 8,846,135 B2; KR 9-5-2015-047561689; JP 5476383 B2; EP 2326745 A2.
23. Carbon electrode composites for Li-ion batteries prepared from polymer precursors10.1142/S1793604711001713 ↗
24. C/Li2MnSiO4 nanocomposite cathode material for Li-ion batteries
25. Enhanced rate performance of carbon-coated LiNi0.5Mn1.5O4 cathode material for lithium ion batteries10.1016/j.electacta.2010.12.109 ↗
26. Changes in local structure of lithium manganese spinels (Li:Mn=1:2) characterised by XRD, DSC, TGA, IR, and Raman spectroscopy10.1016/j.jpcs.2005.09.001 ↗
27. Synthesis, thermal and electrical properties of Li1+δMn2−δO4 prepared by a sol–gel method10.1016/S0167-2738(02)00192-3 ↗
28. Low-temperature lithium-manganese oxide cathode materials for polymer batteries10.1016/S0378-7753(96)02448-2 ↗
29. Lithium-rich manganese oxide spinel thin films as 3 V electrode for lithium batteries10.1016/j.electacta.2015.08.145 ↗
30. Electrochemical impedance spectroscopy study of C/Li2MnSiO4 composite cathode material at different states of charge10.1016/j.ssi.2014.05.005 ↗
31. Carbon nanocoatings for C/LiFePO4 composite cathode10.1016/j.ssi.2013.03.003 ↗
32. An electrochemical impedance spectroscopic study of the electronic and ionic transport properties of spinel LiMn2O410.1021/jp9109157 ↗