Exothermal mechanisms in the charged LiNi1/3Mn1/3Co1/3O2 electrode layers for sulfide-based all-solid-state lithium batteries
Source abstract
Abstract
Abstract Sulfide-based all-solid-state lithium batteries are a possible next-generation power source due to their incombustibility and large energy density. A composite comprising LiNi1/3Mn1/3Co1/3O2 (NMC) and 75Li2S·25P2S5 (LPS) glass electrolytes are used as a positive electrode material, which exhibits excellent charge–discharge cycle characteristics. In this study, to understand the origin of exothermal reactions during heating, we investigated structural changes in initially charged NMC–LPS composites mainly by in-situ synchrotron X-ray diffraction measurements and ex-situ transmission electron microscopy observations. We found that significant structural changes occurred in the NMC–LPS composites after heating above 300 °C. NMC decomposed into transition metal sulfides, such as MnS and CoNi2S4, while crystallization occurred in LPS predominantly precipitating a Li3PO4 crystalline phase. The formation of Li3PO4 is attributable to oxidation reactions between Li3PS4 and oxygen, which was generated during NMC decomposition. Thus, the exothermic peaks that were characteristic of the charged NMC–LPS composites are fundamentally related to heat generation that accompanies the formation of transition metal sulfides and Li3PO4 crystalline phases. As a result, when exposed to real cell operating environments, LPS and NMC yield a chemical reaction via heat treatment that leads to the exothermal reactions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Minami · 2005
2. Progress and prospective of solid-state lithium batteries10.1016/j.actamat.2012.10.034 ↗
3. Discharge performance of all-solid-state battery using a lithium superionic conductor Li10GeP2S1210.5796/electrochemistry.80.749 ↗
4. Recent development of sulfide solid electrolytes and interfacial modification for all-solid-state rechargeable lithium batteries10.1016/j.jascer.2013.03.005 ↗
5. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
6. New, highly ion-conductive crystals precipitated from Li2S–P2S5 glasses10.1002/adma.200401286 ↗
7. Characterization of Li2S-P2S5 glass-ceramics as a solid electrolyte for lithium secondary batteries10.1016/j.ssi.2004.08.036 ↗
8. Formation of superionic crystals from mechanically milled Li2S–P2S5 glasses10.1016/S1388-2481(02)00555-6 ↗
9. High lithium ion conducting glass-ceramics in the system Li2S–P2S510.1016/j.ssi.2006.04.017 ↗
10. A lithium superionic conductor10.1038/nmat3066 ↗
11. Direct observation of a non-crystalline state of Li2S–P2S5 solid electrolytes10.1038/s41598-017-04030-y ↗
12. Preparation of Li2S–P2S5 amorphous solid electrolytes by mechanical milling10.1111/j.1151-2916.2001.tb00685.x ↗
13. Ionic conductivity and crystallization process in the Li2S–P2S5 glass electrolyte10.1016/j.ssi.2018.01.010 ↗
14. Direct observation of a non-isothermal crystallization process in precursor Li10GeP2S12 glass electrolyte10.1016/j.jpowsour.2017.09.070 ↗
15. Analysis of structural and thermal stability in the positive electrode for sulfide-based all-solid-state lithium batteries10.1016/j.jpowsour.2017.09.031 ↗
16. Crystallization behavior of the Li2S–P2S5 glass electrolyte in the LiNi1/3Mn1/3Co1/3O2 positive electrode layer10.1038/s41598-018-24524-7 ↗
17. Preparation and ionic conductivity of Li7P3S11−z glass-ceramic electrolytes10.1016/j.jnoncrysol.2010.04.048 ↗
18. High-throughput powder diffraction measurement system consisting of multiple MYTHEN detectors at beamline BL02B2 of SPring-810.1063/1.4999454 ↗
19. High contrast hollow-cone dark field transmission electron microscopy for nanocrystalline grain size quantification10.1016/j.micron.2009.11.008 ↗
20. Grain size determination in nano-scale polycrystalline aggregates by precession illumination-hollow cone dark field imaging in the transmission electron microscope10.1016/j.matchar.2011.10.003 ↗
21. Consistent indexing of a (set of) single crystal SAED pattern(s) with the ProcessDiffraction program10.1016/j.ultramic.2004.12.004 ↗
22. Electron diffraction based analysis of phase fractions and texture in nanocrystalline thin films, part I: Principles10.1017/S1431927608080380 ↗
23. Electron diffraction based analysis of phase fractions and texture in nanocrystalline thin films, Part II: Implementation10.1017/S1431927609090023 ↗
24. Electron diffraction based analysis of phase fractions and texture in nanocrystalline thin films, part III: application examples10.1017/S1431927611012803 ↗
25. Airstable, high-conduction solid electrolytes of arsenic-substituted Li4SnS410.1039/C3EE43357A ↗
26. Mechanochemical synthesis and characterization of metastable hexagonal Li4SnS4 solid electrolyte10.1021/acs.inorgchem.8b01049 ↗
27. Improvement of chemical stability of Li3PS4 glass electrolytes by adding MxOy (M = Fe, Zn, and Bi) nanoparticles10.1039/c3ta10247e ↗