Effect of compression on the water management of polymer electrolyte fuel cells: An in-operando neutron radiography study
Source abstract
Abstract
Abstract In-depth understanding of the effect of compression on the water management in polymer electrolyte fuel cells (PEFCs) is indispensable for optimisation of performance and durability. Here, in-operando neutron radiography is utilised to evaluate the liquid water distribution and transport within a PEFC under different levels of compression. A quantitative analysis is presented with the influence of compression on the water droplet number and median droplet surface area across the entire electrode area. Water management and performance of PEFCs is strongly affected by the compression: the cell compressed at 1.0 MPa demonstrates ∼3.2% and ∼7.8% increase in the maximum power density over 1.8 MPa and 2.3 MPa, respectively. Correlation of performance to neutron radiography reveals that the performance deviation in the mass transport region is likely due to flooding issues. This could be ascribed to the loss of the porosity and increased tortuosity factor of the gas diffusion layer under the land at higher compression pressure. The size and number of droplets formed as a function of cell compression was examined: with higher compression pressure, water droplet number and median droplet surface area rapidly increase, showing the ineffective water removal, which leads to fuel starvation and the consequent performance decay.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Review and analysis of PEM fuel cell design and manufacturing10.1016/S0378-7753(02)00542-6 ↗
2. Maintaining desired level of relative humidity throughout a fuel cell with spatially variable heat removal rates10.1016/j.ijhydene.2011.07.078 ↗
3. Advanced materials for improved PEMFC performance and life10.1016/j.jpowsour.2004.01.023 ↗
4. Mechanisms and effects of mechanical compression and dimensional change in polymer electrolyte fuel cells–A review10.1016/j.jpowsour.2015.02.111 ↗
5. A study of the effect of compression on the performance of polymer electrolyte fuel cells using electrochemical impedance spectroscopy and dimensional change analysis10.1016/j.ijhydene.2013.04.021 ↗
6. Effect of gas diffusion layer compression on PEM fuel cell performance10.1016/j.jpowsour.2005.11.069 ↗
7. Effect of clamping pressure on the performance of a PEM fuel cell10.1016/j.jpowsour.2007.01.015 ↗
8. Influence of clamping force on the performance of PEMFCs10.1016/j.jpowsour.2006.09.068 ↗
9. Effects of clamping force on the water transport and performance of a PEM (proton electrolyte membrane) fuel cell with relative humidity and current density10.1016/j.energy.2015.10.045 ↗
10. Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging10.1016/j.jpowsour.2013.12.062 ↗
11. Effects of polytetrafluoroethylene treatment and compression on gas diffusion layer microstructure using high-resolution X-ray computed tomography10.1016/j.jpowsour.2014.05.004 ↗
12. Gas-diffusion-layer structural properties under compression via X-ray tomography10.1016/j.jpowsour.2016.08.020 ↗
13. Heterogeneous porosity distributions of polymer electrolyte membrane fuel cell gas diffusion layer materials with rib-channel compression10.1016/j.ijhydene.2016.06.147 ↗
14. Pore network modeling to explore the effects of compression on multiphase transport in polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.jpowsour.2016.10.039 ↗
15. Understanding water transport in polymer electrolyte fuel cells using coupled continuum and pore-network models10.1002/fuce.201500213 ↗
16. A numerical study of structural change and anisotropic permeability in compressed carbon cloth polymer electrolyte fuel cell gas diffusion layers10.1002/fuce.201000037 ↗
17. Probing water distribution in compressed fuel-cell gas-diffusion layers using X-ray computed tomography10.1016/j.elecom.2015.02.005 ↗
18. Effects of compression on water distribution in gas diffusion layer materials of PEMFC in a point injection device by means of synchrotron X-ray imaging10.1016/j.ijhydene.2017.11.047 ↗
19. Effect of compression on water transport in gas diffusion layer of polymer electrolyte membrane fuel cell using lattice Boltzmann method10.1016/j.jpowsour.2015.06.080 ↗
20. Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers10.1016/j.jpowsour.2006.09.045 ↗
21. In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells10.1016/j.jpowsour.2003.11.068 ↗
22. Water profile determination in a running proton exchange membrane fuel cell using small-angle neutron scattering10.1016/0376-7388(96)00110-X ↗
23. Effect of serpentine flow-field design on the water management of polymer electrolyte fuel cells: an in-operando neutron radiography study10.1016/j.jpowsour.2018.07.085 ↗
24. The hydro-electro-thermal performance of air-cooled, open-cathode polymer electrolyte fuel cells: combined localised current density, temperature and water mapping10.1016/j.electacta.2015.08.106 ↗
25. Visualization of water accumulation process in polymer electrolyte fuel cell using neutron radiography10.1016/j.phpro.2015.07.086 ↗
26. Investigation of the liquid water distributions in a 50 cm2 PEM fuel cell: effects of reactants relative humidity, current density, and cathode stoichiometry10.1016/j.energy.2015.01.101 ↗
27. Effect of gas diffusion layer properties on water distribution across air-cooled, open-cathode polymer electrolyte fuel cells: a combined ex-situ X-ray tomography and in-operando neutron imaging study10.1016/j.electacta.2016.06.068 ↗
28. PEM fuel cell operation under air and O2 feed: analysis of cell performance and liquid water distributions10.1002/fuce.201500145 ↗
29. Effects of flow field and diffusion layer properties on water accumulation in a PEM fuel cell10.1016/j.ijhydene.2007.05.044 ↗
30. Analysis of gas diffusion layer and flow-field design in a PEMFC using neutron radiography10.1149/1.2823003 ↗
31. Investigation of hot pressed polymer electrolyte fuel cell assemblies via X-ray computed tomography10.1016/j.electacta.2017.05.028 ↗
32. 3D numerical investigation of clamping pressure effect on the performance of proton exchange membrane fuel cell with interdigitated flow field10.1016/j.energy.2017.10.020 ↗
33. Optimization of the electrodes humidification temperature and clamping pressure to achieve uniform current density in a commercial-sized proton exchange membrane fuel cell10.1016/j.ijhydene.2016.09.178 ↗
34. Conrad-2: cold neutron tomography and radiography at ber ii (v7)10.17815/jlsrf-2-108 ↗
35. Water build-up and evolution during the start-up of a PEMFC: visualization by means of Neutron Imaging10.1016/j.ijhydene.2016.11.076 ↗
36. Membrane resistance and current distribution measurements under various operating conditions in a polymer electrolyte fuel cell10.1016/j.jpowsour.2007.05.071 ↗
37. Liquid water distribution patterns featuring back-diffusion transport in a PEM fuel cell with neutron imaging10.1016/j.ijhydene.2014.08.042 ↗
38. Boillat · 2009
39. In situ investigation of water transport in an operating PEM fuel cell using neutron radiography: Part 1–Experimental method and serpentine flow field results10.1016/j.ijheatmasstransfer.2006.07.003 ↗
40. An improved serpentine flow field with enhanced cross-flow for fuel cell applications10.1016/j.ijhydene.2011.01.147 ↗
41. 1D+ 3D two-phase flow numerical model of a proton exchange membrane fuel cell10.1016/j.apenergy.2017.06.048 ↗
42. Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells10.1016/j.jpowsour.2005.05.086 ↗
43. Capillary pressures in carbon paper gas diffusion layers having hydrophilic and hydrophobic pores10.1016/j.ijheatmasstransfer.2011.08.049 ↗
44. Dynamic behaviour of liquid water emerging from a GDL pore into a PEMFC gas flow channel10.1016/j.jpowsour.2007.07.024 ↗
45. Effect of ageing of gas diffusion layers on the water distribution in flow field channels of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2015.10.004 ↗
46. Water management studies in PEM fuel cells, part IV: effects of channel surface wettability, geometry and orientation on the two-phase flow in parallel gas channels10.1016/j.ijhydene.2011.04.226 ↗