journal article·2018-02

Validating and improving a zero-dimensional stack voltage model of the Vanadium Redox Flow Battery

S. König, M.R. Suriyah, T. Leibfried

Publisher page

Abstract

Abstract Simple, computationally efficient battery models can contribute significantly to the development of flow batteries. However, validation studies for these models on an industrial-scale stack level are rarely published. We first extensively present a simple stack voltage model for the Vanadium Redox Flow Battery. For modeling the concentration overpotential, we derive mass transfer coefficients from experimental results presented in the 1990s. The calculated mass transfer coefficient of the positive half-cell is 63% larger than of the negative half-cell, which is not considered in models published to date. Further, we advance the concentration overpotential model by introducing an apparent electrochemically active electrode surface which differs from the geometric electrode area. We use the apparent surface as fitting parameter for adapting the model to experimental results of a flow battery manufacturer. For adapting the model, we propose a method for determining the agreement between model and reality quantitatively. To protect the manufacturer's intellectual property, we introduce a normalization method for presenting the results. For the studied stack, the apparent electrochemically active surface of the electrode is 41% larger than its geometrical area. Hence, the current density in the diffusion layer is 29% smaller than previously reported for a zero-dimensional model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Redox flow batteries for the storage of renewable energy: a review10.1016/j.rser.2013.08.001 ↗
2. Techno-economic modeling and analysis of redox flow battery systems10.3390/en9080627 ↗
3. Development and perspective in vanadium flow battery modeling10.1016/j.apenergy.2014.06.077 ↗
4. Innovative model-based flow rate optimization for vanadium redox flow batteries10.1016/j.jpowsour.2016.09.147 ↗
5. Studies on pressure losses and flow rate optimization in vanadium redox flow battery10.1016/j.jpowsour.2013.09.071 ↗
6. Studies on optimal charging conditions for vanadium redox flow batteries10.1016/j.est.2017.02.008 ↗
7. Dynamic control strategy for the electrolyte flow rate of vanadium redox flow batteries
8. C. Blanc, A. Rufer, Optimization of the operating point of a vanadium redox flow battery, 2009 IEEE Energy Conversion Congress and Exposition.10.5772/13338 ↗
9. X. Binyu, Z. Jiyun, L. Jinbin, Modeling of an all-vanadium redox flow battery and optimization of flow rates, 2013 IEEE Power Energy Society General Meeting.
10. A dynamic plug flow reactor model for a vanadium redox flow battery cell10.1016/j.jpowsour.2016.02.018 ↗
11. A three-dimensional model for negative half cell of the vanadium redox flow battery10.1016/j.electacta.2011.09.042 ↗
12. Mass transfer to a carbon or graphite felt electrode10.1016/0013-4686(90)85008-B ↗
13. Mass transfer at carbon fibre electrodes10.1007/BF01008853 ↗
14. A field validated model of a vanadium redox flow battery for microgrids10.1109/TSG.2014.2310212 ↗
15. Experimental testing procedures and dynamic model validation for vanadium redox flow battery storage system10.1016/j.jpowsour.2013.12.078 ↗
16. Modeling of a vanadium redox flow battery for power system dynamic studies10.1016/j.ijhydene.2013.12.042 ↗
17. Verification of a state of the art all-vanadium flow battery model with the Compact Storage by SCHMID Energy Systems GmbH
18. A plug flow reactor model of a vanadium redox flow battery considering the conductive current collectors10.1016/j.jpowsour.2017.05.085 ↗
19. Blanc · 2009
20. On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems10.1016/j.coche.2016.02.006 ↗
21. Nonlinear corrections to darcy's law at low reynolds numbers10.1017/S0022112097005843 ↗
22. Electron-transfer kinetics of Np3+/Np4+, NpO2+/NpO22+, V2+/V3+, and VO2+/VO2+ at carbon electrodes10.1149/1.1870794 ↗
23. A comparative study of carbon felt and activated carbon based electrodes for sodium polysulfide/bromine redox flow battery10.1016/j.electacta.2006.03.106 ↗
24. Thermal modelling of battery configuration and self-discharge reactions in vanadium redox flow battery10.1016/j.jpowsour.2012.06.052 ↗
25. The chemistry of redox-flow batteries10.1002/anie.201410823 ↗
26. Non-isothermal modelling of the all-vanadium redox flow battery10.1016/j.electacta.2009.08.009 ↗
27. A dynamic performance model for redox-flow batteries involving soluble species10.1016/j.electacta.2008.05.067 ↗
28. A transient vanadium flow battery model incorporating vanadium crossover and water transport through the membrane10.1149/2.017209jes ↗
29. König · 2017