High performance LaNi 1-x Co x O 3-δ (x = 0.4 to 0.7) infiltrated oxygen electrodes for reversible solid oxide cells
Source abstract
Abstract
Abstract Oxygen electrodes prepared by infiltration of yttria stabilized zirconia backbone with Ce 0.8 Gd 0.2 O 1.95 barrier layer and LaNi 1-x Co x O 3-δ (x = 0.4 to 0.7) catalyst for application in reversible solid oxide cells have been studied. The effect of temperature and Ni:Co ratio on their phase composition, microstructure and electrochemical properties are discussed. It was shown that oxygen electrodes infiltrated with LaNi 0.5 Co 0.5 O 3-δ had the lowest polarization resistance, i.e. 67 mΩ cm 2 at 600 °C. The performance of a fuel electrode supported solid oxide cell with infiltrated oxygen electrode in both fuel cell and electrolysis mode was tested. Electrochemical characterization of the solid oxide cell showed that the resistance contribution from these oxygen electrodes to the overall cell resistance is minor i.e. approximately 20 mΩ cm 2 at a temperature of 700 °C. The cell was also tested in the steam electrolysis mode at a constant current of −1.0 A cm −2 at 800 °C for 240 h. The oxygen electrode showed reasonable degradation rate with the oxygen electrode resistance of 33 mΩ cm 2 at 700 °C after 240 h of testing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. SOFC cathodes prepared by infiltration with various LSM precursors10.1149/1.2183867 ↗
2. Solid oxide fuel cell cathodes by infiltration of La0.6Sr0.4Co0.2Fe0.8O3-δ into Gd-Doped Ceria10.1016/j.ssi.2008.07.002 ↗
3. High performance cathodes for solid oxide fuel cells prepared by infiltration of La0.6Sr0.4CoO3−δ into Gd-Doped ceria10.1149/1.3571249 ↗
4. Characterization of impregnated GDC nano structures and their functionality in LSM based cathodes10.1016/j.ssi.2012.07.011 ↗
5. Efficient cathodes for solid oxide fuel cells prepared by polymeric precursor infiltration10.1149/2.042201jes ↗
6. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
7. La0.6Sr0.4Co0.2Fe0.8O3 cathodes incorporated with Sm0.2Ce0.8O2 by three different methods for solid oxide fuel cells10.1016/j.jpowsour.2015.07.060 ↗
8. Infiltration of SOFC stacks: evaluation of the electrochemical performance enhancement and the underlying changes in the microstructure10.1002/fuce.201500107 ↗
9. Characterization and stack testing of solid oxide fuel cells with cathodes prepared by infiltration10.1149/2.0231602jes ↗
10. High-performance SOFC cathodes prepared by infiltration10.1002/adma.200802428 ↗
11. Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: advances and challenges10.1016/j.ijhydene.2011.09.067 ↗
12. Functional nanostructure engineering of SOFC cathode by solution infiltration10.1149/2.0051503eel ↗
13. Electrodes for solid oxide fuel cells based on infiltration of Co-Based materials10.1149/2.020204esl ↗
14. Infiltration of ionic-, electronic- and mixed-conducting nano particles into La0.75Sr0.25MnO3–Y0.16Zr0.84O2 cathodes – a comparative study of performance enhancement and stability at different temperatures10.1016/j.jpowsour.2012.11.070 ↗
15. Improving La0.6Sr0.4Co0.8Fe0.2O3-?? infiltrated solid oxide fuel cell cathode performance through precursor solution desiccation10.1016/j.jpowsour.2014.11.082 ↗
16. Precursor solution additives improve desiccated La0.6Sr0.4Co0.8Fe0.2O3-x infiltrated solid oxide fuel cell cathode performance10.1016/j.jpowsour.2015.10.012 ↗
17. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
18. Characterisation of LaNi1 − xCoxO3 as a possible SOFC cathode material10.1016/0167-2738(95)00224-3 ↗
19. Sr- and Ni-Doped LaCoO3 and LaFeO3 perovskites10.1149/1.1838789 ↗
20. Growth of polycrystalline LaNi1-xCoxO3 (x =0.3,0.5) thin films on Si(100) by pulsed laser deposition10.1007/s00339-003-2177-6 ↗
21. Lanthanum nickelate thin films deposited by spray pyrolysis: crystallization, microstructure and electrochemical properties10.1016/j.jeurceramsoc.2011.12.032 ↗
22. Structural properties and electrochemical performance of strontium- and nickel-substituted lanthanum cobaltite10.1016/j.ssi.2008.04.026 ↗
23. La0.99Co0.4Ni0.6O3−δ–Ce0.8Gd0.2O1.95 as composite cathode for solid oxide fuel cells10.1016/j.jpowsour.2010.11.065 ↗
24. LaNi0.8Co0.2O3 as a cathode catalyst for a direct borohydride fuel cell10.1016/j.jpowsour.2011.02.037 ↗
25. LaCo0.6Ni0.4O3-?? as cathode contact material for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2012.06.052 ↗
26. LaNi 1-x Co x O 3-δ (x=0.4 to 0.7) cathodes for solid oxide fuel cells by infiltration10.1088/1757-899X/104/1/012019 ↗
27. Samson · 2012
28. A method to separate process contributions in impedance spectra by variation of test conditions10.1149/1.2790791 ↗
29. Sulfur poisoning of SOFC anodes: effect of overpotential on long-term degradation10.1149/2.080406jes ↗
30. A-site deficient (La0.6Sr0.4)1-sFe0.8Co0.2O3-δ perovskites as SOFC cathodes10.1016/j.ssi.2007.07.012 ↗
31. Investigation of thin perovskite layers between cathode and doped ceria used as buffer layer in solid oxide fuel cells10.1007/s10008-015-2815-x ↗
32. Impedance spectroscopic study on well-defined (La,Sr)(Co,Fe)O3−δ model electrodes10.1016/j.ssi.2006.02.045 ↗
33. Hauch · 2017 · 31
34. Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability10.1016/j.ssi.2016.06.003 ↗
35. Enhancing electrocatalytic activity of perovskite oxides by tuning cation deficiency for oxygen reduction and evolution reactions10.1021/acs.chemmater.5b04457 ↗
36. Preparation of SOFC cathodes by infiltration into LSF-YSZ composite scaffolds10.1149/2.0171602jes ↗
37. Eliminating degradation in solid oxide electrochemical cells by reversible operation10.1038/nmat4165 ↗
38. Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2010.06.058 ↗
39. Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells10.1016/j.ijhydene.2011.05.103 ↗
40. Electrolyte degradation in anode supported microtubular yttria stabilized zirconia-based solid oxide steam electrolysis cells at high voltages of operation10.1016/j.jpowsour.2011.01.015 ↗
41. Degradation mechanism of electrolyte and air electrode in solid oxide electrolysis cells operating at high polarization10.1016/j.ijhydene.2012.10.113 ↗
42. Degradation phenomena in a solid oxide electrolysis cell after 9000 h of operation10.1016/j.jpowsour.2012.09.061 ↗