An innovative architectural design to enhance the electrochemical performance of La2NiO4+δ cathodes for solid oxide fuel cell applications
Source abstract
Abstract
An architectural design of the cathode microstructure based on combining electrostatic spray deposition (ESD) and screen-printing (SP) techniques has demonstrated to be an innovative strategy to enhance the electrochemical properties of La2NiO4+δ (LNO) as oxygen electrode on Ce0.9Gd0.1O2–δ (CGO) electrolyte for solid oxide fuel cells. For this purpose, the influence of the ESD process parameters on the microstructure has been systematically investigated. Electrochemical performances of four selected cathode microstructures are investigated: (i) 3-D coral nanocrystalline (average particle size ∼ 100 nm) LNO film grown by ESD; (ii) 3-D coral nanocrystalline film (average particle size ∼ 150 nm) grown by ESD with a continuous nanometric dense interface; (iii) porous screen-printed LNO film (average particle size ∼ 400 nm); and (iv) 3-D coral nanocrystalline film (average particle size ∼ 150 nm) with a continuous nanometric dense interface prepared by ESD topped by a LNO current collector prepared by SP. A significant reduction in the polarization resistance (Rpol) is obtained (0.08 Ω cm2 at 700 °C) for 3-D coral topped by the SP layer. Moreover LNO is found to be stable and compatible with CGO up to 800 °C for only 10 days duration in air, making it potentially suitable for SOFCs cathode application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Materials development for intermediate-temperature solid oxide electrochemical devices10.1007/s10853-011-6213-1 ↗
2. Materials for intermediate-temperature solid-oxide fuel cells10.1146/annurev-matsci-070813-113426 ↗
3. New chemical systems for solid oxide fuel cells10.1021/cm902687z ↗
4. Materials for solid oxide fuel cells10.1021/cm902640j ↗
5. Oxygen diffusion and surface exchange in La2–xSrxNiO4+δ10.1016/S0167-2738(00)00388-X ↗
6. Oxygen transport properties of La2Ni1–xCuxO4+δ mixed conducting oxides10.1016/S1293-2558(03)00091-8 ↗
7. Electrode properties of Ln2NiO4 + δ ( Ln = La , Nd , Pr ) AC impedance and DC polarization studies10.1149/1.2207059 ↗
8. Advances in layered oxide cathodes for intermediate temperature solid oxide fuel cells10.1039/b922430k ↗
9. Ceria-based solid electrolytes10.1016/0167-2738(95)00229-4 ↗
10. Structure and electrical properties of La1–xSrxCo1–yFeyO3. Part 2. The system La1–xSrxCo0.2Fe0.8O310.1016/0167-2738(94)00245-N ↗
11. Structure and electrical properties of La1–xSrxCo1–yFeyO3.Part 1. The system La0.8Sr0.2Co1–yFeyO310.1016/0167-2738(94)00244-M ↗
12. Appraisal of Ce1–y Gdy O2–y/2 electrolytes for IT-SOFC operation at 500°C10.1016/S0167-2738(99)00319-7 ↗
13. A comparative study of the Ruddlesden-Popper series, Lan+1NinO3n+1(n=1, 2 and 3), for solid-oxide fuel-cell cathode applications10.1016/j.ssi.2006.05.005 ↗
14. Synthesis and electrical conductivity of La2NiO4+δ derived from apolyaminocarboxylate complex precursor10.1016/j.matlet.2005.12.044 ↗
15. Development of lanthanum nickelate as a cathode for use in intermediate temperature solid oxide fuel cells10.1016/j.ssi.2010.02.014 ↗
16. Influence of configuration and microstructure on performance of La2NiO4+δ intermediate-temperature solid oxide fuel cells cathodes10.1016/j.jpowsour.2013.03.192 ↗
17. Comparative study of electrochemical properties of mixed conducting Ln2NiO4+δ (Ln=La, Pr and Nd) and La0.6Sr0.4Fe0.8Co0.2O3–δ as SOFC cathodes associated to Ce0.9Gd0.1O2–δ, La0.8Sr0.2Ga0.8Mg0.2O3–δ and La9Sr1Si6O26.5 electrolytes10.1016/j.ssi.2013.06.009 ↗
18. Mixed nickelates Pr2–XLaxNiO4+δ used as cathodes in metal supported SOFCs10.1149/05701.2093ecst ↗
19. Sputtered La0.5Sr0.5MnO3–yttria stabilized zirconia composite film electrodes for SOFC10.1016/S0167-2738(97)00098-2 ↗
20. Plasma deposition of La0.8Sr0.2MnO3 thin films on yttria-stabilized zirconia from aerosol precursor10.1016/S0254-0584(01)00331-5 ↗
21. Enhanced high-temperature electronic transport properties in nanostructured epitaxial thin films of the Lan+1NinO3n+1 ruddlesden-popper series (n ) 1, 2, 3, ∞)10.1021/cm070804e ↗
22. Electrical conductivity and oxygen exchange kinetics of La2NiO4+dThin films grown by chemical vapor deposition10.1149/1.2829900 ↗
23. Low-pressure-MOCVD LaMnO3±d very thin films on YSZ (100) optimized for studies of the triple phase boundary10.1016/S0167-2738(99)00328-8 ↗
24. Deposition and characterization of nanocrystalline tetragonal zirconia films using electrostatic spray deposition10.1016/S0167-2738(00)00795-5 ↗
25. Fabrication of La1–xSrxCo1–yFeyO3 thin films by electrostatic spray deposition10.1016/S0167-2738(02)00615-X ↗
26. Electrostatic sol-spray deposition of nanostructured ceramic thin films10.1016/S0021-8502(98)00075-5 ↗
27. Influence of electrospraying parameters on the microstructure of La0.6Sr0.4Co0.2F0.8O3–δ films for SOFCs10.1016/j.jssc.2009.04.018 ↗
28. Comprehensive review of current developments in IT-SOFCs10.2174/1877944111303010003 ↗
29. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
30. Initial stages in zirconia coatings using ESD10.1021/cm048341p ↗
31. Elaboration of Ta2O5 thin films using electrostatic spray deposition for microelectronic applications10.1021/jp0676585 ↗
32. Morphology control of thin LiCoO2 films fabricated using the electrostatic spray deposition (ESD) technique10.1039/jm9960600765 ↗
33. Nanostructured LSM/YSZ composite cathodes for IT-SOFC: a comprehensive microstructural study by electrostatic spray deposition10.1016/j.ssi.2008.05.006 ↗
34. Current and droplet size in the electrospraying of liquids. Scaling laws10.1016/S0021-8502(96)00433-8 ↗
35. Propensities of oxalic, citric, succinic, and maleic acids for the aqueous solution/vapour interface: surface tension measurements and molecular dynamics simulations10.1016/j.cplett.2008.07.085 ↗
36. Development of electrohydrodynamic sprays related to space charge effects10.1016/0021-8502(96)00161-9 ↗
37. Lange · 1992
38. Electrochemical characteristics of LSCF-SDC composite cathode for intermediate temperature SOFC10.1016/j.electacta.2007.01.001 ↗
39. La2NiO4+δ infiltrated into gadolinium doped ceria as novel solid oxide fuel cell cathodes: electrochemical performance and impedance modeling10.1016/j.jpowsour.2015.06.077 ↗
40. Mass transport in La2Ni1–xCoxO4+δ oxides with the K2NiF4 structure10.1016/S0167-2738(02)00506-4 ↗
41. Thermal stability of Ln2 NiO4+δ (Ln: La, Pr, Nd) and their chemical compatibility with YSZ and CGO solid electrolytes10.1016/j.ijhydene.2011.08.105 ↗
42. Reactivity at the Ln2NiO4+δ/electrolyte interface (Ln = La, Nd) studied by electrochemical impedance spectroscopy and transmission electron microscopy10.1016/j.jpowsour.2014.04.082 ↗
43. Structural and sintering characteristics of the La2Ni1–xCoxO4+δ series10.1016/j.ceramint.2003.12.164 ↗
44. Novel K2NiF4-Type materials for solid oxide fuel cells: compatibility with electrolytes in the intermediate temperature range10.1002/fuce.200800023 ↗
45. Reactions between a zirconia-based electrolyte and LaCoO3-based electrode materials10.1016/S0167-2738(97)84051-9 ↗