journal article·2021-09

Thermal characteristics of ultrahigh power density lithium-ion battery

Zehui Liu, Chu Wang, Xinming Guo, Shikuo Cheng, Yinghui Gao, Rui Wang, Yaohong Sun, Ping Yan

Publisher page

Abstract

Abstract Ultrahigh power density lithium-ion batteries (LIBs) are widely applied in transportation and energy storage systems. However, the thermal characteristics of power lithium-ion batteries under high discharge rates remain unclear. In this work, a commercial lithium-ion battery with lithium titanate oxide (LTO) as the anode material is investigated under discharge rates up to 40C. The heat generation power and temperature rise ratio increase with the discharge rate. A maximum heat generation rate of 358 W is obtained under 40C discharge. Due to the limited discharge capacity with high discharge rates, the highest temperature rise appears under 25C discharge, which is 38.9 °C. The percentage of irreversible heat increases with the discharge rate, but it only accounts for 83% under 40C discharge. Furthermore, different internal resistance estimation methods are used to predict the heat generation of lithium-ion batteries. It is found that hybrid pulse power characteristic (HPPC) method is more accurate than electrochemical impedance spectroscopy (EIS) method, and heat generation in higher discharge rate can be estimated by HPPC with a shorter time scale.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Thermal modeling of Li-ion polymer battery for electric vehicle drive cycles10.1016/j.jpowsour.2012.04.015 ↗
2. Measurement of multiscale thermal transport phenomena in Li-ion cells: a review
3. A comprehensive investigation of lithium-ion battery degradation performance at different discharge rates10.1016/j.jpowsour.2019.227108 ↗
4. A coupled electrochemical-thermal failure model for predicting the thermal runaway behavior of lithium-ion batteries10.1149/2.0311816jes ↗
5. Improving the electrochemical cycling performance of anode materials via facile in situ surface deposition of a solid electrolyte layer10.1016/j.jpowsour.2019.03.077 ↗
6. Li4Ti5O12-based energy conversion and storage systems: status and prospects10.1016/j.ccr.2017.05.006 ↗
7. Advances in spinel Li4Ti5O12 anode materials for lithium-ion batteries
8. Adaptive modeling in the frequency and time domain of high-power lithium titanate oxide cells in battery management systems10.1016/j.est.2020.101966 ↗
9. Experimental investigation of the thermal and cycling behavior of a lithium titanate-based lithium-ion pouch cell10.1016/j.est.2018.02.012 ↗
10. Lithium titanate oxide battery cells for high-power automotive applications Electro-thermal properties, aging behavior and cost considerations10.1016/j.est.2020.101656 ↗
11. Extensive aging analysis of high-power lithium titanate oxide batteries: impact of the passive electrode effect10.1016/j.jpowsour.2020.228566 ↗
12. Application of energy storage technologies for electric railway vehicles—examples with hybrid electric railway vehicles10.1002/tee.20534 ↗
13. Research on cycle life of lithium titanate battery at room temperature[J/OL]
14. Review of maglev train technologies10.1109/TMAG.2006.875842 ↗
15. Challenges in modeling high power lithium titanate oxide cells in battery management systems10.1016/j.est.2019.101189 ↗
16. An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery10.1016/j.jpowsour.2017.08.035 ↗
17. Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components10.1016/j.apenergy.2018.06.126 ↗
18. Hazard analysis of thermally abused lithium-ion batteries at different state of charges10.1016/j.est.2019.101065 ↗
19. A survey of methods for monitoring and detecting thermal runaway of lithium-ion batteries10.1016/j.jpowsour.2019.226879 ↗
20. Advanced exergy analysis and risk estimation of novel NH3-H2O and H2O-LiBr integrated vapor absorption refrigeration system10.1016/j.enconman.2020.113348 ↗
21. Review of pool boiling enhancement by surface modification10.1016/j.ijheatmasstransfer.2018.09.026 ↗
22. Experimental investigation of thermal performance of large-sized battery module using hybrid PCM and bottom liquid cooling configuration10.1016/j.applthermaleng.2019.113968 ↗
23. Towards understanding heat generation characteristics of li-ion batteries by calorimetry, impedance, and potentiometry studies10.1149/2.1811712jes ↗
24. Heat generation in high power prismatic Li-ion battery cell with LiMnNiCoO2 cathode material10.1002/er.3156 ↗
25. Entropy measurement of a large format lithium ion battery and its application to calculate heat generation10.1016/j.electacta.2019.04.026 ↗
26. Experimental and analytical study on heat generation characteristics of a lithium-ion power battery10.1016/j.ijheatmasstransfer.2018.02.038 ↗
27. Heat loss distribution: impedance and thermal loss analyses in LiFePO4/graphite 18650 electrochemical cell10.1016/j.jpowsour.2016.08.045 ↗
28. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
29. Determination of suitable parameters for battery analysis by Electrochemical Impedance Spectroscopy10.1016/j.measurement.2017.04.022 ↗
30. Application of physical electric circuit modeling to characterize Li-ion battery electrochemical processes10.1016/j.jpowsour.2014.07.083 ↗
31. A study of the influence of measurement timescale on internal resistance characterisation methodologies for lithium-ion cells10.1038/s41598-017-18424-5 ↗
32. A nonlinear equivalent circuit model for lithium ion cells10.1016/j.jpowsour.2012.08.090 ↗
33. Reversible and irreversible heat generation of NCA/Si–C pouch cell during electrochemical energy-storage process10.1016/j.jechem.2018.02.016 ↗
34. Heat-generation rate and general energy balance for insertion battery systems10.1149/1.1837884 ↗
35. Modeling for the scale-up of a lithium-ion polymer battery10.1016/j.jpowsour.2008.10.019 ↗
36. Charaterization of high-power lighium-ion cells during constant current cycling Part I. Cycle performance and electrochemical diagnostics10.1016/S0378-7753(03)00351-3 ↗
37. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II:Modelling10.1016/j.jpowsour.2010.07.071 ↗
38. Infrared imaging investigation of temperature fluctuation and spatial distribution for a large laminated lithium–ion power battery10.1016/j.applthermaleng.2019.02.096 ↗
39. A novel fractional variable-order equivalent circuit model and parameter identification of electric vehicle Li-ion batteries10.1016/j.isatra.2019.08.004 ↗
40. Heat of mixing during fast charge/discharge of li-ion cell: a study on NMC523 cathode10.1149/1945-7111/abaf71 ↗
41. The polarization characteristics of lithium-ion batteries under cyclic charge and discharge10.1007/s10008-019-04282-w ↗
42. Electrochemical impedance spectroscopy study of lithium-ion capacitors: modeling and capacity fading mechanism10.1016/j.jpowsour.2021.229454 ↗
43. PEO/LAGP hybrid solid polymer electrolytes for ambient temperature lithium batteries by solvent-free, “one pot” preparation10.1016/j.est.2019.100947 ↗
44. Inherently flame-retardant solid polymer electrolyte for safety-enhanced lithium metal battery10.1016/j.cej.2021.128415 ↗
45. Metal organic framework laden poly(ethylene oxide) based composite electrolytes for all-solid-state Li-S and Li-metal polymer batteries10.1016/j.electacta.2018.08.012 ↗
46. Understanding the effect of UV-induced cross-linking on the physicochemical properties of highly performing PEO/LiTFSI-Based polymer electrolytes10.1021/acs.langmuir.9b00041 ↗
47. Room temperature ionic liquid (RTIL)-based electrolyte cocktails for safe, high working potential Li-based polymer batteries10.1016/j.jpowsour.2018.11.061 ↗
48. UV-Cross-Linked composite polymer electrolyte for high-rate, ambient temperature lithium batteries10.1021/acsaem.8b02185 ↗