journal article·2021-08

Surface reinforcement doping to suppress oxygen release of Li-rich layered oxides

Chong Yin, Xiaohui Wen, Liyang Wan, Zhepu Shi, Zhining Wei, Xiao Li, Qingwen Gu, Bao Qiu, Zhaoping Liu

Publisher page

Abstract

Abstract Li-rich layered oxides can deliver ultrahigh capacities which stem from a blend of cationic redox and mostly lattice oxygen redox. However, the oxygen redox reaction often leads to structure transition and oxygen release from the material surface. Herein, the surface doping of B is conducted via a molten salt method, which creates a thin reinforcement layer containing stable B–O bonds. X-ray photoelectron spectroscopy reveals that the doping of B only acts on the material surface and cannot inhibit oxygen redox in the bulk. Differential electrochemical mass spectroscopy measurement demonstrates that the surface protective layer effectively reduces the oxygen release of LLOs. A combination of X-ray diffraction and transmission electron microscope analyses confirm the enhanced structural stability. As a consequence, the target material displays a high reversible capacity of 275 mAh g−1 at 0.1C and a suppressed voltage decay rate of 2.5 mV per cycle during the first 80 cycles (at 0.2C, 2.0–4.8V). The findings highlight the essential role of stable surface oxygen framework in cycling stability, and demonstrate the effectiveness of surface reinforcement doping in reducing oxygen release.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques10.1039/D0EE01694B ↗
2. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
3. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
4. Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen10.1038/nchem.2471 ↗
5. Kinetic stability of bulk LiNiO2 and surface degradation by oxygen evolution in LiNiO2-based cathode materials10.1002/aenm.201802586 ↗
6. Injection of oxygen vacancies in the bulk lattice of layered cathodes10.1038/s41565-019-0428-8 ↗
7. Oxygen release degradation in Li-ion battery cathode materials: mechanisms and mitigating approaches10.1002/aenm.201900551 ↗
8. The oxygen vacancy in Li-ion battery cathode materials10.1039/D0NH00340A ↗
9. Gradient Li-rich oxide cathode particles immunized against oxygen release by a molten salt treatment10.1038/s41560-019-0508-x ↗
10. Dielectric polarization in inverse spinel-structured Mg2TiO4 coating to suppress oxygen evolution of Li-rich cathode materials10.1002/adma.202000496 ↗
11. The Role of AlF3 coatings in improving electrochemical cycling of Li-enriched nickel-manganese oxide electrodes for Li-ion batteries10.1002/adma.201104106 ↗
12. Surface-functionalized coating for lithium-rich cathode material to achieve ultra-high rate and excellent cycle performance10.1021/acsnano.9b05960 ↗
13. Extended interfacial stability through simple acid rinsing in a Li-rich oxide cathode material10.1021/jacs.0c02859 ↗
14. Insight of a phase compatible surface coating for long-durable Li-rich layered oxide cathode10.1002/aenm.201901795 ↗
15. Enhancing the kinetics of Li-rich cathode materials through the pinning effects of gradient surface Na+ doping10.1002/aenm.201501914 ↗
16. Site-selective in situ electrochemical doping for Mn-rich layered oxide cathode materials in lithium-ion batteries10.1002/aenm.201702514 ↗
17. Al doping for mitigating the capacity fading and voltage decay of layered Li and Mn-rich cathodes for Li-ion batteries10.1002/aenm.201502398 ↗
18. Structure and electrochemistry of B doped Li(Li0.2Ni0.13Co0.13Mn0.54)1-xBxO2 as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2016.07.064 ↗
19. Ti-based surface integrated layer and bulk doping for stable voltage and long life of Li-rich layered cathodes10.1002/adfm.202009310 ↗
20. Surface structural transition induced by gradient polyanion-doping in Li-rich layered oxides: implications for enhanced electrochemical performance10.1002/adfm.201600576 ↗
21. Haynes · 2014
22. Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries10.1038/ncomms12108 ↗
23. Superstructure control of first-cycle voltage hysteresis in oxygen-redox cathodes10.1038/s41586-019-1854-3 ↗
24. Boosting energy efficiency of Li-rich layered oxide cathodes by tuning oxygen redox kinetics and reversibility10.1016/j.ensm.2020.11.034 ↗
25. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
26. Electrochemical and structural characterization of LiNi1-yCoyO2 (0<y<0.2) positive electrodes during initial cycling10.1149/1.1393422 ↗
27. Layered cathode materials Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 for lithium-ion batteries10.1149/1.1407994 ↗
28. Structure and electrochemical properties of boron-doped LiCoO210.1006/jssc.1997.7552 ↗
29. Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for li-ion batteries10.1002/aenm.201801202 ↗
30. Improving the electrochemical performance of layered lithium-rich transition-metal oxides by controlling the structural defects10.1039/C3EE41664J ↗
31. Moulder · 1992
32. Stable, fast and high-energy-density LiCoO2 cathode at high operation voltage enabled by glassy B2O3 modification10.1016/j.jpowsour.2017.06.050 ↗
33. Fundamental interplay between anionic/cationic redox governing the kinetics and thermodynamics of lithium-rich cathodes10.1038/s41467-017-02291-9 ↗
34. Understanding the discrepancy of defect kinetics on anionic redox in lithium-rich cathode oxides10.1021/acsami.8b21201 ↗
35. First-cycle voltage hysteresis in Li-rich 3d cathodes associated with molecular O2 trapped in the bulk10.1038/s41560-020-00697-2 ↗
36. Evolution of redox couples in Li-and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release10.1038/s41560-018-0207-z ↗
37. Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries10.1038/s41563-020-0767-8 ↗
38. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
39. Practical assessment of anionic redox in Li-rich layered oxide cathodes: a mixed blessing for high energy Li-ion batteries10.1149/2.0531614jes ↗
40. Residual lithium carbonate predominantly accounts for first cycle CO2 and CO outgassing of Li-stoichiometric and Li-rich layered transition-metal oxides10.1021/jacs.7b08461 ↗
41. A correction for powder diffraction peak asymmetry due to axial divergence10.1107/S0021889894004218 ↗