High-performance half-Heusler thermoelectric devices through direct bonding technique
Source abstract
Abstract
Abstract Solid-state thermoelectric generators (TEGs) are promising solution for waste heat recovery. However, they typically suffer from lower conversion efficiency, lack of reliable high temperature device fabrication process and long-term stability. In order to realize high electrical conversion efficiency (ECE) in TEGs, it is critical that in conjunction with high TE materials figure of merit, zT, there is also a reliable TE module fabrication process. This study demonstrates the TEG fabrication process that results in reduced thermal and electrical contact resistances between metal electrodes and TE legs, even at high temperatures (>600 °C). The fabrication approach is demonstrated using p-type ZrCoSb-based and n-type ZrNiSn-based half-Heusler TE materials. High temperature brazing material is used as a filler that enables direct bonding of TE legs to the copper electrode without metallizing legs. This technique improves the TEG performance and stability at high temperatures by minimizing the contact resistance and diffusion at TE leg/electrode interface. The fabricated modules exhibit a high power density of ~11.5 Wcm−2 and an ECE of 9.5% at 670 °C temperature gradient. The module was exposed to longtime soaking at 550 °C in air and was found to exhibit negligible deterioration. These results are highly promising for advancing the TE modules in waste heat recovery applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heusler alloys: electronic and magnetic properties · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Thermoelectric devices: a review of devices, architectures, and contact optimization10.1002/admt.201700256 ↗
2. Complex thermoelectric materials10.1038/nmat2090 ↗
3. Recent progress in p-type thermoelectric magnesium silicide based solid solutions10.1016/j.mtener.2017.04.002 ↗
4. The effect of charge carrier and doping site on thermoelectric properties of Mg2Sn0.75Ge0.2510.1016/j.actamat.2016.10.077 ↗
5. Thermoelectric properties of materials near the band crossing line in Mg2Sn–Mg2Ge–Mg2Si system10.1016/j.actamat.2015.11.006 ↗
6. “Nanoparticle-inAlloy” approach to efficient thermoelectrics: silicides in SiGe10.1021/nl8031982 ↗
7. Recent progress of half-Heusler for moderate temperature thermoelectric applications10.1016/j.mattod.2013.09.015 ↗
8. Thinking like a chemist: intuition in thermoelectric materials10.1002/anie.201508381 ↗
9. Goldsmid · 1995
10. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
11. Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe–SrTe10.1038/ncomms12167 ↗
12. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
13. Thermoelectric generators for wearable body heat harvesting: material and device concurrent optimization10.1016/j.nanoen.2019.104265 ↗
14. N-type bismuth telluride nanocomposite materials optimization for thermoelectric generators in wearable applications10.3390/ma12091529 ↗
15. Effect of microwave processing and glass inclusions on thermoelectric properties of P-type bismuth antimony telluride alloys for wearable applications10.3390/en13174524 ↗
16. Improvement of low‐temperature zT in a Mg3Sb2–Mg3Bi2 solid solution via Mg‐vapor annealing10.1002/adma.201902337 ↗
17. High thermoelectric cooling performance of n-type Mg3Bi2-based materials10.1126/science.aax7792 ↗
18. Metallic n-type Mg3Sb2 single crystals demonstrate the absence of ionized impurity scattering and enhanced thermoelectric performance10.1002/adma.201908218 ↗
19. Shi · Adv. Funct. Mater. · 2010 · 20 · 75510.1002/adfm.200901817 ↗
20. Comparative studies on thermoelectric properties of p-type Mg2Sn0. 75Ge0. 25 doped with lithium, sodium, and gallium10.1016/j.actamat.2017.09.009 ↗
21. Influence of power factor enhancement on the thermoelectric figure of merit in Mg2Si0.4Sn0.6 based materials10.1002/pssa.201300196 ↗
22. Electronic structure and thermoelectric properties of p-type Ag-doped Mg2Sn and Mg2Sn1-xSix (x = 0.05, 0.1)10.1063/1.4898013 ↗
23. Enhanced thermoelectric properties of Pb‐doped BiCuSeO ceramics10.1002/adma.201301675 ↗
24. BiCuSeO oxyselenides: new promising thermoelectric materials10.1039/C4EE00997E ↗
25. Enhancement of thermoelectric performance of b-Zn4Sb3 through resonant distortion of electronic density of states doped with Gd10.1039/C5TA01778E ↗
26. Enhanced thermoelectric performance via carrier energy filtering effect in β-Zn4Sb3 alloy bulk embedded with (Bi2Te3)0.2(Sb2Te3)0.810.1063/1.4864220 ↗
27. Ultrahigh thermoelectric performance by electron and phonon critical scattering in Cu2Se1‐xIx10.1002/adma.201302660 ↗
28. Thermoelectric properties of copper selenide with ordered selenium layer and disordered copper layer10.1016/j.nanoen.2012.02.010 ↗
29. High‐performance GeTe‐based thermoelectrics: from materials to devices10.1002/aenm.202000367 ↗
30. Low-symmetry rhombohedral GeTe thermoelectrics10.1016/j.joule.2018.02.016 ↗
31. A TiAlCu metallization for ‘n’ type CoSbx skutterudites with improved performance for high-temperature energy harvesting applications10.1007/s11664-017-5306-2 ↗
32. In-doped multifilled n-type skutterudites with ZT = 1.810.1016/j.actamat.2015.05.024 ↗
33. Enhanced thermoelectric performance of Yb-Single-Filled skutterudite by ultralow thermal conductivity10.1021/acs.chemmater.8b03994 ↗
34. High-efficiency skutterudite modules at a low temperature gradient10.3390/en12224292 ↗
35. High performance thermoelectric module through isotype bulk heterojunction engineering of skutterudite materials10.1016/j.nanoen.2019.104193 ↗
36. Enhanced thermoelectric figure-of-merit in nanostructured p-type silicon germanium bulk alloys10.1021/nl8026795 ↗
37. Comparison of thermoelectric properties of nanostructured Mg2Si, FeSi2, SiGe, and nanocomposites of SiGe–Mg2Si, SiGe–FeSi210.1063/1.4966138 ↗
38. Enhanced thermoelectric performance in a metal/semiconductor nanocomposite of iron silicide/silicon germanium10.1039/C6RA01947A ↗
39. Thermoelectric silicides: a review10.7567/JJAP.56.05DA04 ↗
40. Brown · Chem. Mater. · 2006 · 18 · 187310.1021/cm060261t ↗
41. The intrinsic disorder related alloy scattering in ZrNiSn half-Heusler thermoelectric materials10.1038/srep06888 ↗
42. Ultrahigh power factor in thermoelectric system Nb0.95M0.05FeSb (M = Hf, Zr, and Ti)10.1002/advs.201800278 ↗
43. NbFeSb-based p-type half-Heuslers for power generation applications10.1039/C4EE02180K ↗
44. Discovery of TaFeSb-based half-Heuslers with high thermoelectric performance10.1038/s41467-018-08223-5 ↗
45. Decoupled phononic-electronic transport in multi-phase n-type half-Heusler nanocomposites enabling efficient high temperature power generation10.1016/j.mattod.2020.01.002 ↗
46. High performance p-type half-Heusler thermoelectric materials10.1088/1361-6463/aaaa58 ↗
47. High power factor and power density in NbFeSb10.1073/pnas.1617663113 ↗
48. Chauhan · J. Mater. Chem. C · 2016 · 4 · 576610.1039/C6TC01115B ↗
49. Xia · J. Phys. Condens. Matter · 2001 · 13 · 7710.1088/0953-8984/13/1/308 ↗
50. Yu · Advanced Energy Materials · 2018 · 8 · 170131310.1002/aenm.201701313 ↗
51. Current progress and future challenges in thermoelectric power generation: from materials to devices10.1016/j.actamat.2014.12.042 ↗
52. Compatibility between Co-metallized PbTe thermoelectric legs and an Ag–Cu–in brazing alloy10.3390/ma11010099 ↗
53. Efficient and robust thermoelectric power generation device using hot-pressed metal contacts on nanostructured half-heusler alloys10.1007/s11664-016-4692-1 ↗
54. Bismuth telluride/half-heusler segmented thermoelectric unicouple modules provide 12% conversion efficiency10.1002/aenm.202001924 ↗
55. High-temperature and high-power-density nanostructured thermoelectric generator for automotive waste heat recovery10.1016/j.enconman.2015.08.051 ↗
56. Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials10.1038/ncomms9144 ↗
57. Half‐heusler thermoelectric module with high conversion efficiency and high power density10.1002/aenm.202000888 ↗
58. Thermoelectric modules based on half-heusler materials produced in large quantities10.1007/s11664-013-2863-x ↗
59. Thermoelectric devices: a review of devices, architectures, and contact optimization10.1002/admt.201700256 ↗
60. Thermoelectric power generation: from new materials to devices10.1098/rsta.2018.0450 ↗
61. On the challenges of reducing contact resistances in thermoelectric generators based on half-heusler alloys10.1007/s11664-015-4156-z ↗
62. Ag/Ni metallization bilayer: a functional layer for highly efficient polycrystalline SnSe thermoelectric modules10.1007/s11664-016-4972-9 ↗
63. Multi-layer metallization structure development for highly efficient polycrystalline SnSe thermoelectric devices10.3390/app7111116 ↗
64. Enhanced thermoelectric figure of merit of p-type half-heuslers10.1021/nl104138t ↗
65. Enhancement in thermoelectric figure‐of‐merit of an N‐type half‐heusler compound by the nanocomposite approach10.1002/aenm.201100126 ↗
66. Ni barrier in Bi2Te3-based thermoelectric modules for reduced contact resistance and enhanced power generation properties10.1016/j.jallcom.2019.04.293 ↗
67. Polarity effect in a Sn3Ag0.5Cu/bismuth telluride thermoelectric system10.1007/s11664-013-2877-4 ↗
68. Study of diffusion barrier for solder/n-type Bi2Te3 and bonding strength for p- and n-type thermoelectric modules10.1007/s11664-017-5906-x ↗
69. Interface characterization of nickel contacts to bulk bismuth tellurium selenide10.1002/sia.3046 ↗
70. Low resistance ohmic contacts to Bi2Te3 using Ni and Co metallization10.1149/1.3385154 ↗
71. Barrier/bonding layers on bismuth telluride (Bi2Te3) for high temperature thermoelectric modules10.1007/s10854-011-0306-0 ↗
72. Development of low resistance electrical contacts for thermoelectric devices based on n-type PbTe and p-type TAGS-85 ((AgSbTe2)0.15(GeTe) 0.85)10.1088/0022-3727/42/1/015502 ↗
73. Rapid fabrication of diffusion barrier between metal electrode and thermoelectric materials using current-controlled spark plasma sintering technique10.1016/j.jmrt.2018.01.008 ↗
74. Conversion efficiency of skutterudite-based thermoelectric modules10.1039/C4CP01582G ↗
75. Realizing a thermoelectric conversion efficiency of 12% in bismuth telluride/skutterudite segmented modules through full-parameter optimization and energyloss minimized integration10.1039/C7EE00447H ↗
76. Excessively doped PbTe with Ge-induced nanostructures enables high-efficiency thermoelectric modules10.1016/j.joule.2018.04.025 ↗
77. Thermoelectric power generation: from new materials to devices10.1098/rsta.2018.0450 ↗
78. Physical principles of microminiaturization in thermoelectricity
79. High power density body heat energy harvesting10.1021/acsami.9b14823 ↗
80. Fabrication and characterization of nickel contacts for magnesium silicide based thermoelectric generators10.1016/j.jallcom.2015.01.149 ↗
81. Practical contact resistance measurement method for bulk Bi2Te3-based thermoelectric devices10.1007/s11664-013-2806-6 ↗
82. A quick and efficient measurement technique for performance evaluation of thermoelectric materials10.1088/0957-0233/27/10/105008 ↗