journal article·2021-03

Dendrite-free lithium metal anode enabled by ion/electron-conductive N-doped 3D carbon fiber interlayer

Jianzong Man, Kun Liu, Haibang Zhang, Yehong Du, Jinpeng Yin, Xinyu Wang, Juncai Sun

Publisher page

Abstract

Abstract Lithium metal is considered as the ultimate anode candidate for next-generation high-energy storage systems due to its ultrahigh specific capacity and low reduction potential. However, the practical application of lithium metal anode is severely impeded by uncontrollable lithium dendrite growth. In this work, a three-dimensional (3D) N-doped carbon fiber (NCF) network with ion/electron-conductivity has been fabricated by electrospinning the polyacrylonitrile solution and subsequent thermal treatment. The 3D NCF as an interlayer covering on the lithium anode is used to regulate the lithium plating/stripping behavior, accommodating partially deposited Li to realize lithium dendrite-free deposition on the lithium anode. Benefiting from these, the symmetrical cell of Li anode protected by NCF (Li@NCF) delivers long duration time (>1200 h) with a low initial nucleation overpotential (30 mV) at the current density of 1 mA cm−2. In addition, the full cell of Li@NCF||LiFePO4 exhibits excellent capacity retention of 114.6 mAh cm−2 over 360 cycles at the current density of 1 C. This strategy contributes a step forward for dendrite-free lithium metal batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
2. Reviving lithium-metal anodes for next-generation high-energy batteries10.1002/adma.201700007 ↗
3. Towards better Li metal anodes: challenges and strategies10.1016/j.mattod.2019.09.018 ↗
4. Three dimensional porous frameworks for lithium dendrite suppression10.1016/j.jechem.2019.09.031 ↗
5. The challenge of lithium metal anodes for practical applications10.1002/smtd.201800551 ↗
6. Perspectives for restraining harsh lithium dendrite growth: towards robust lithium metal anodes10.1016/j.ensm.2018.03.024 ↗
7. Li metal batteries and solid state batteries benefiting from halogen-based strategies10.1016/j.ensm.2018.02.017 ↗
8. Effect of electrolyte on the nanostructure of the solid electrolyte interphase (SEI) and performance of lithium metal anodes10.1039/C8EE00364E ↗
9. Interface engineering for lithium metal anodes in liquid electrolyte10.1002/aenm.202001257 ↗
10. Advanced Micro/Nanostructures for lithium metal anodes10.1002/advs.201600445 ↗
11. A review of naturally derived nanostructured materials for safe lithium metal batteries10.1016/j.mtnano.2019.100049 ↗
12. Nanodiamonds suppress the growth of lithium dendrites10.1038/s41467-017-00519-2 ↗
13. In situ plating of porous mg network layer to reinforce anode dendrite suppression in Li-Metal batteries10.1021/acsami.8b00989 ↗
14. The electrochemistry of lithium in ionic liquid/organic diluent mixtures10.1016/j.electacta.2010.08.023 ↗
15. Alginate-Based artificial SEI layer for stable lithium metal anodes10.1021/acsami.9b12634 ↗
16. Rational design of graphitic-inorganic Bi-layer artificial SEI for stable lithium metal anode10.1016/j.ensm.2018.06.023 ↗
17. Direct growth of 3D host on Cu foil for stable lithium metal anode10.1016/j.ensm.2018.02.005 ↗
18. In situ constructing lithiophilic NiFx nanosheets on Ni foam current collector for stable lithium metal anode via a succinct fluorination strategy10.1016/j.cej.2020.125122 ↗
19. A novel cross-linked nanocomposite solid-state electrolyte with super flexibility and performance for lithium metal battery10.1016/j.nanoen.2020.104600 ↗
20. Lithiophilic zn sites in porous CuZn alloy induced uniform li nucleation and dendrite-free li metal deposition10.1021/acs.nanolett.0c00352 ↗
21. Low-volume-change, dendrite-free lithium metal anodes enabled by lithophilic 3D matrix with LiF-enriched surface10.1039/C8TA10779C ↗
22. Prestoring lithium into stable 3D nickel foam host as Dendrite-Free lithium metal anode10.1002/adfm.201700348 ↗
23. A nitrogen-doped-carbon/ZnO modified Cu foam current collector for high-performance Li metal batteries10.1039/C8TA12064A ↗
24. Graphene anchored on Cu foam as a lithiophilic 3D current collector for a stable and dendrite-free lithium metal anode10.1039/C8TA02810A ↗
25. Early lithium plating behavior in confined nanospace of 3D lithiophilic carbon matrix for stable solid‐state lithium metal batteries10.1002/smll.201904216 ↗
26. Regulating uniform li Plating/Stripping via dual‐conductive metal‐organic frameworks for high‐rate lithium metal batteries10.1002/adfm.202000786 ↗
27. Infiltrating lithium into carbon cloth decorated with zinc oxide arrays for dendrite-free lithium metal anode10.1007/s12274-018-2245-z ↗
28. Regulating lithium nucleation via CNTs modifying carbon cloth film for stable li metal anode10.1002/smll.201803734 ↗
29. Dendrite-free Li metal anode enabled by a 3D free-standing lithiophilic nitrogen-enriched carbon sponge10.1016/j.jpowsour.2018.03.049 ↗
30. Multi-walled carbon nanotube interlayers with controllable thicknesses for high-capacity and long-life lithium metal anodes10.1016/j.jpowsour.2018.11.037 ↗
31. Recent advances in understanding dendrite growth on alkali metal anodes10.1016/j.enchem.2019.100003 ↗
32. Advances in the design of 3D‐structured electrode materials for lithium–metal anodes10.1002/adma.202002193 ↗
33. Carbonized regenerated silk nanofiber as multifunctional interlayer for high-performance lithium-sulfur batteries10.1016/j.memsci.2019.117349 ↗
34. Carbon paper interlayers: a universal and effective approach for highly stable Li metal anodes10.1016/j.nanoen.2017.11.032 ↗
35. Self-Assembled conductive Metal-Oxide nanofiber interface for stable Li-Metal anode10.1021/acsami.9b13884 ↗
36. Polymer Nanofiber-Guided uniform lithium deposition for battery electrodes10.1021/nl5046318 ↗
37. Interlayers for lithium-based batteries10.1016/j.ensm.2019.05.021 ↗
38. The effect of electrical conductivity on lithium metal deposition in 3D carbon nanofiber matrices10.1016/j.carbon.2019.07.104 ↗
39. An ion redistributor for dendrite-free lithium metal anodes10.1126/sciadv.aat3446 ↗
40. Constructing ionic gradient and lithiophilic interphase for high‐rate li‐metal anode10.1002/smll.201905171 ↗
41. In situ encapsulation of germanium clusters in carbon nanofibers: high-Performance anodes for Lithium-Ion batteries10.1002/cssc.201402304 ↗
42. Fabrication of carbon nanorods and graphene nanoribbons from a metal–organic framework10.1038/nchem.2515 ↗
43. N‐doped graphene modified 3D porous cu current collector toward microscale homogeneous li deposition for li metal anodes10.1002/aenm.201800914 ↗
44. Revealing the short‐circuiting mechanism of garnet‐based solid‐state electrolyte10.1002/aenm.201900671 ↗
45. Self-Formed hybrid interphase layer on lithium metal for High-Performance lithium–sulfur batteries10.1021/acsnano.7b08035 ↗
46. Eliminating tip dendrite growth by lorentz force for stable lithium metal anodes10.1002/adfm.201902630 ↗
47. Conductive nanostructured scaffolds render low local current density to inhibit lithium dendrite growth10.1002/adma.201504117 ↗