Synergistic electrolyte additives for enhancing the performance of high-voltage lithium-ion cathodes in half-cells and full-cells
Source abstract
Abstract
Abstract Herein we address the key challenge towards the practical use of high-voltage lithium-ion cathode materials, i.e., the insufficient stability of the electrolyte towards oxidation. The transition metals in such materials, especially nickel, catalyze the decomposition reaction of the electrolyte, ultimately leading to poor cycling stability and rapid fading of the battery. To tackle this challenge, a new combination of electrolyte additives is introduced, targeting stabilized electrode/electrolyte interfaces and interphases for both the anode and cathode. The results show that the synergistic effect of tris(trimethylsilyl) phosphite (TTSPi) and bis(2,2,2-trifluoroethyl) carbonate (TFEC) can significantly improve the performance of cathode half-cells and also of lithium-ion full-cells with a cell voltage higher than 4.5 V. Cells using both TTSPi and TFEC as additives show greatly enhanced cycling stability, increased capacity, and improved coulombic efficiency, which can be even further improved when adding also lithium bis(oxalato)borate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Perspectives of automotive battery R&D in China, Germany, Japan, and the USA10.1016/j.jpowsour.2018.02.039 ↗
2. Lithium-ion batteries. A look into the future10.1039/c1ee01388b ↗
3. Higher, stronger, better A review of 5 volt cathode materials for advanced lithium-ion batteries10.1002/aenm.201200068 ↗
4. Review Recent progress in high-voltage lithium ion batteries10.1016/j.jpowsour.2013.03.024 ↗
5. Effect of coatings on the green electrode processing and cycling behaviour of LiCoPO410.1039/C6TA05262B ↗
6. Safer electrolytes for lithium-ion batteries: state of the art and perspectives10.1002/cssc.201500284 ↗
7. Recent progress in research on high-voltage electrolytes for lithium-ion batteries10.1002/cphc.201402175 ↗
8. Beneficial influence of succinic anhydride as electrolyte additive on the self-discharge of 5 V LiNi0.4Mn1.6O4 cathodes10.1016/j.jpowsour.2013.02.030 ↗
9. Short communication Use of non-conventional electrolyte salt and additives in high-voltage graphite/LiNi0.4Mn1.6O4 batteries10.1016/j.jpowsour.2013.03.052 ↗
10. A review on electrolyte additives for lithium-ion batteries10.1016/j.jpowsour.2006.07.074 ↗
11. Film-forming electrolyte additives for rechargeable lithium-ion batteries: progress and outlook10.1039/C9TA00126C ↗
12. Comparative study of electrolyte additives using electrochemical impedance spectroscopy on symmetric cells10.1016/j.jpowsour.2013.11.054 ↗
13. A systematic study of well-known electrolyte additives in LiCoO2/graphite pouch cells10.1016/j.jpowsour.2013.11.064 ↗
14. A systematic study of electrolyte additives in Li[Ni1/3Mn1/3Co1/3]O2 (NMC)/Graphite pouch cells10.1149/2.0511412jes ↗
15. Comparative study of tris(trimethylsilyl) phosphate and tris(trimethylsilyl) phosphite as electrolyte additives for Li-ion cells10.1149/2.087406jes ↗
16. Improving the long-term cycling performance of lithium-ion batteries at elevated temperature with electrolyte additives10.1016/j.jpowsour.2015.04.070 ↗
17. The effects of a ternary electrolyte additive system on the electrode/electrolyte interfaces in high voltage Li-ion cells10.1149/2.1051606jes ↗
18. Ternary electrolyte additive mixtures for Li-ion cells that promote long lifetime and less reactivity with charged electrodes at elevated temperatures10.1149/2.0181507jes ↗
19. Tris(trimethylsilyl)phosphite as electrolyte additive for high voltage layered lithium nickel cobalt manganese oxide cathode of lithium ion battery10.1016/j.electacta.2014.09.157 ↗
20. Tris(trimethylsilyl) phosphite (TMSPi) and triethyl phosphite (TEPi) as electrolyte additives for lithium ion batteries: mechanistic insights into differences during LiNi0.5Mn0.3Co0.2O2-graphite full cell cycling10.1149/2.1101707jes ↗
21. Lifetime limit of tris(trimethylsilyl) phosphite as electrolyte additive for high voltage lithium ion batteries10.1039/C6RA06555D ↗
22. 5V-class high-voltage batteries with over-lithiated oxide and a multi-functional additive10.1039/C4TA06531J ↗
23. Tunable and robust phosphite-derived surface film to protect lithium-rich cathodes in lithium-ion batteries10.1021/acsami.5b01770 ↗
24. Failure mechanism of layered lithium-rich oxide/graphite cell and its solution by using electrolyte additive10.1016/j.jpowsour.2016.03.090 ↗
25. Vinylene carbonate and tris(trimethylsilyl) phosphite hybrid additives to improve the electrochemical performance of spinel lithium manganese oxide/graphite cells at 60°C10.1016/j.electacta.2015.05.129 ↗
26. A multifunctional phosphite-containing electrolyte for 5 V-class LiNi0.5Mn1.5O4 cathodes with superior electrochemical performance10.1039/C4TA01129E ↗
27. Exploiting chemically and electrochemically reactive phosphite derivatives for high-voltage spinel LiNi0.5Mn1.5O4 cathodes10.1016/j.jpowsour.2015.10.043 ↗
28. High voltage LiNi0.5Mn0.3Co0.2O2/graphite cell cycled at 4.6 V with a FEC/HFDEC-Based electrolyte10.1002/aenm.201700109 ↗
29. Some fluorinated carbonates as electrolyte additives for Li(Ni0.4Mn0.4Co0.2)O2/graphite pouch cells10.1149/2.0831608jes ↗
30. Fluorinated carbonate-based electrolyte for high-voltage Li(Ni0.5Mn0.3Co0.2)O2/graphite lithium-ion battery10.1149/2.0591701jes ↗
31. Enabling LiTFSI-based electrolytes for safer lithium-ion batteries by using linear fluorinated carbonates as (Co)solvent10.1002/cssc.201402502 ↗
32. Effect of carbonates fluorination on the properties of LiTFSI-based electrolytes for Li-ion batteries10.1016/j.electacta.2015.02.042 ↗
33. Increased cycling performance of Li-ion batteries by phosphoric acid modified LiNi0.5Mn1.5O4 cathodes in the presence of LiBOB
34. Scaling up “nano” Li4Ti5O12 for high-power lithium-ion anodes using large scale flame spray pyrolysis10.1149/2.0711512jes ↗
35. A new LiCoPO4 polymorph via low temperature synthesis10.1039/c2ta00118g ↗
36. Tailoring high-voltage and high-performance LiNi0.5Mn1.5O4 cathode material for high energy lithium-ion batteries10.1016/j.jpowsour.2015.10.010 ↗
37. In Situ coating of Li[Ni0.33Mn0.33Co0.33]O2 particles to enable aqueous electrode processing10.1002/cssc.201600353 ↗
38. Complementary strategies toward the aqueous processing of high-voltage LiNi0.5Mn1.5O4 lithium-ion cathodes10.1002/cssc.201702021 ↗
39. Comparative analysis of aqueous binders for high-energy Li-rich NMC as a lithium-ion cathode and the impact of adding phosphoric acid10.1021/acsami.8b03657 ↗
40. A novel DEMS approach for studying gas evolution at battery-type electrode|electrolyte interfaces: high-voltage LiNi 0.5 Mn 1.5 O 4 cathode in ethylene and dimethyl carbonate electrolytes10.1016/j.electacta.2019.05.076 ↗
41. Measuring the coulombic efficiency of lithium metal cycling in anode-free lithium metal batteries10.1149/2.0641814jes ↗
42. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries10.1002/adfm.201605989 ↗
43. Tris(trimethylsilyl) phosphite as an efficient electrolyte additive to improve the surface stability of graphite anodes10.1021/acsami.7b11309 ↗
44. A high-voltage and high-capacity Li1+x Ni0.5 Mn1.5 O4 cathode material: from synthesis to full lithium-ion cells10.1002/cssc.201600365 ↗
45. Ab initio study of the operating mechanisms of tris(trimethylsilyl) phosphite as a multifunctional additive for Li-ion batteries10.1016/j.jpowsour.2017.04.062 ↗
46. Why is tris(trimethylsilyl) phosphite effective as an additive for high-voltage lithium-ion batteries?10.1039/C5TA01253H ↗
47. Perspective—fluorinating interphases
48. A cost and resource analysis of sodium-ion batteries10.1038/natrevmats.2018.13 ↗
49. Effects of solvent, lithium salt, and temperature on stability of carbonate-based electrolytes for 5.0 V LiNi0.5Mn1.5O4 electrodes10.1149/2.0201602jes ↗
50. Mass spectra
51. LiBOB as electrolyte salt or additive for lithium-ion batteries based on LiNi0.8Co0.15Al0.05O2/graphite10.1149/1.3374666 ↗
52. Effect of lithium bis(oxalato)borate additive on electrochemical performance of Li1.17Ni0.17Mn0.5Co0.17O2 cathodes for lithium-ion batteries10.1149/2.0211414jes ↗