journal article·2015-10Open access

The influence of anomalous diffusion on the impedance response of LiCoO2|C batteries

Salim Erol, Mark E. Orazem

Abstract

A process model for impedance analysis was developed in the context of reactions and transport processes that were hypothesized to govern the performance of the Li-ion battery. At the carbon electrode, lithium ions and solvent were considered to react to form a solid-electrolyte interphase (SEI). In addition, lithium ions were assumed to diffuse through the SEI to intercalate into the graphene layers. As these two processes involve an addition of currents, the corresponding impedances were considered to be in parallel. Anomalous diffusion of lithium ions was invoked at the LiCoO2 electrode to account for the low-frequency line that had a slope steeper than that predicted by ordinary diffusion. This model was fit to all impedance data collected. The model provided a good description for impedance of batteries under normal operating potentials and temperatures. The contribution of anomalous diffusion was diminished at elevated temperatures, suggesting that the free-energy well associated with anomalous or sticky diffusion was shallow.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Influence of overcharge and over-discharge on the impedance response of LiCoO2|C batteries10.1016/j.jpowsour.2014.07.038 ↗
2. Proposal of novel equivalent circuit for electrochemical impedance analysis of commercially available Lithium ion battery10.1016/j.jpowsour.2012.01.070 ↗
3. Electrochemical impedance spectroscopy study of a lithium/sulfur battery: modeling and analysis of capacity fading10.1149/2.026304jes ↗
4. An electrochemistry-based impedance model for Lithium-ion batteries10.1016/j.jpowsour.2014.02.045 ↗
5. Electrochemical characterization of carbon nanotube/nanohoneycomb diamond composite electrodes for a hybrid anode of Li-ion battery and super capacitor10.1149/1.1649752 ↗
6. Equivalent circuit model parameters of a high-power Li-ion battery: thermal and state of charge effects10.1016/j.jpowsour.2010.12.107 ↗
7. Anomalous diffusion of water in [BMIM] [TFSI] room-temperature ionic liquid10.1021/jp075378z ↗
8. Anomalous segment diffusion in polymers and NMR relaxation spectroscopy10.1021/ma00062a031 ↗
9. Observation of single-file diffusion in dipeptide nanotubes by continuous-flow hyperpolarized Xenon-129 NMR spectroscopy10.1002/cphc.200700336 ↗
10. Correlating the NMR self-diffusion and relaxation measurements with ionic conductivity in polymer electrolytes composed of cross-linked poly(ethylene oxide-propylene oxide) doped with LiN(SO2 CF3)210.1063/1.1288801 ↗
11. Theory of the electrochemical impedance of anomalous diffusion10.1016/S0022-0728(00)00497-6 ↗
12. Rechargeable Li-ion button battery serial LIR2032, http://www.batteryspace.com/productimages/aa/20060224/LIR2032_new1.pdf accessed 03.08.14.
13. Powerstream Li-ion coin cell Lir2032 data sheet, http://www.powerstream.com/p/Lir2032.pdf accessed 03.08.14.
14. On selection of the perturbation amplitude required to avoid nonlinear effects in impedance measurements10.1560/IJC.48.3-4.133 ↗
15. AC impedance analysis of lithium ion battery under temperature control10.1016/j.jpowsour.2012.05.095 ↗
16. Passivating films on lithium electrodes. an approach by means of electrode impedance spectroscopy10.1016/0378-7753(85)88009-5 ↗
17. Effects of nanoparticle geometry and size distribution on diffusion impedance of battery electrodes10.1149/2.023301jes ↗
18. Theory of SEI formation in rechargeable batteries: capacity fade, accelerated aging and lifetime prediction10.1149/2.044302jes ↗
19. A mathematical model for the Lithium-ion negative electrode solid electrolyte interphase10.1149/1.1804812 ↗
20. Battery cycle life prediction with coupled chemical degradation and fatigue mechanics10.1149/2.049210jes ↗
21. On the correlation between surface chemistry and performance of graphite negative electrodes for Li ion batteries10.1016/S0013-4686(99)00194-2 ↗
22. Application of physical electric circuit modeling to characterize Li-ion battery electrochemical processes10.1016/j.jpowsour.2014.07.083 ↗
23. A review of anomalous diffusion phenomena at fractal interface for diffusion-controlled and non-diffusion-controlled transfer processes10.1007/s10008-005-0084-9 ↗
24. Microscopic theory of anomalous diffusion based on particle interactions10.1103/PhysRevE.88.022108 ↗
25. Orazem · 2008
26. Characterization of spontaneous reactions of LiCoO2 with electrolyte solvent for lithium-ion batteries10.1149/1.1793651 ↗
27. Surface film formation on electrodes in a licoo2/graphite cell: a step by step {XPS} study10.1016/j.jpowsour.2007.06.033 ↗
28. Thickness estimation of interface films formed on Li1−x CoO2 electrodes by hard X-ray photoelectron spectroscopy10.1016/j.jpowsour.2011.08.097 ↗
29. Investigation of solid electrolyte interface (SEI) film on LiCoO2 cathode in fluoroethylene carbonate (FEC)-containing electrolyte by 2d correlation x-ray photoelectron spectroscopy (XPS)10.1016/j.molstruc.2014.01.041 ↗
30. Measurement models for electrochemical impedance spectroscopy: I. demonstration of applicability10.1149/1.2069522 ↗
31. Measurement models for electrochemical impedance spectroscopy: 2. determination of the stochastic contribution to the error structure10.1149/1.2048478 ↗
32. Measurement models for electrochemical impedance spectroscopy: 3. evaluation of consistency with the kramers-kronig relations10.1149/1.2048479 ↗