journal article·2020-05

A novel fast capacity estimation method based on current curves of parallel-connected cells for retired lithium-ion batteries in second-use applications

Long Chang, Chunyu Wang, Chenghui Zhang, Linjing Xiao, Naxin Cui, Hongyu Li, Jianfeng Qiu

Publisher page

Abstract

Abstract Retired lithium-ion batteries from electric vehicles provide considerable social, economic and environmental benefits in second-use applications especially for energy storage. However, the effective capacity estimation is a key technique and difficulty for second-life of large-scale retired cells. To address the issue, this paper provides a fast novel capacity estimation method from a new perspective of current distribution within parallel-connected cells. Firstly, using the parallel-connected cells analytical model, the correlation between capacity and current distribution is deduced. According to the correlation, the capacity of each cell is simultaneously estimated for the n parallel-connected cells by measured the current curves in only one complete discharge cycle, which is more efficient than one after another. Then an experimental device and procedure are designed to verify the method. Results demonstrate that the method is feasible and accurate. Meanwhile, through comparing the results of packs with three different battery types, the main factors affecting accuracy are found including open circuit voltage, parameter difference of cell and loads. Finally, comparison of different methods shows that the method has the advantages of high efficiency, low calculation, low accumulative errors and good consistency of state-of-charge, which is helpful for regrouping of retired cells and promoting second-life battery applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. A review of battery electric vehicle technology and readiness levels10.1016/j.rser.2017.03.138 ↗
2. Integration issues of lithium-ion battery into electric vehicles battery pack10.1016/j.jclepro.2015.11.011 ↗
3. Media · 2019
4. The significance of Li-ion batteries in electric vehicle life-cycle energy and emissions and recycling's role in its reduction, Energ
5. The social-economic-environmental impacts of recycling retired EV batteries under reward-penalty mechanism10.1016/j.apenergy.2019.113313 ↗
6. Recycling of spent lithium-ion batteries in view of lithium recovery: a critical review10.1016/j.jclepro.2019.04.304 ↗
7. Metallurgical and mechanical methods for recycling of lithium-ion battery pack for electric vehicles, Resour, Conserv10.1016/j.resconrec.2018.04.025 ↗
8. Processes and technologies for the recycling and recovery of spent lithium-ion batteries10.1016/j.rser.2015.12.363 ↗
9. Solving spent lithium-ion battery problems in China: opportunities and challenges10.1016/j.rser.2015.08.014 ↗
10. The ability of battery second use strategies to impact plug-in electric vehicle prices and serve utility energy storage applications10.1016/j.jpowsour.2011.06.053 ↗
11. Review of electrical energy storage technologies, materials and systems_ challenges and prospects for large-scale grid storage10.1039/C8EE01419A ↗
12. Energy and climate effects of second-life use of electric vehicle batteries in California through 205010.1016/j.jpowsour.2015.04.097 ↗
13. Recycling of spent lithium-ion battery: a critical review10.1080/10643389.2013.763578 ↗
14. Recognition of battery aging variations for LiFePO4 batteries in 2nd use applications combining incremental capacity analysis and statistical approaches10.1016/j.jpowsour.2017.06.007 ↗
15. Reused second life batteries for aggregated demand response services10.1016/j.jclepro.2018.12.005 ↗
16. Technical viability of battery second life_ A study from the ageing perspective10.1109/TIA.2018.2801262 ↗
17. Recycling of end-of-life vehicles (ELVs) for building products: concept of processing framework from automotive to construction industries in Malaysia10.1016/j.jclepro.2018.04.145 ↗
18. Recycling mechanisms and policy suggestions for spent electric vehicles' power battery -A case of Beijing10.1016/j.jclepro.2018.03.043 ↗
19. Towards sustainable business models for electric vehicle battery second use: a critical review10.1016/j.jenvman.2019.05.095 ↗
20. Study on the performance evaluation and echelon utilization of retired LiFePO4 power battery for smart grid10.1016/j.jclepro.2018.12.262 ↗
21. A rapid screening and regrouping approach based on neural networks for large-scale retired lithium-ion cells in second-use applications10.1016/j.jclepro.2018.12.210 ↗
22. Modelling and experimental evaluation of parallel connected lithium ion cells for an electric vehicle battery system10.1016/j.jpowsour.2016.01.001 ↗
23. Development of cell selection framework for second-life cells with homogeneous properties, Int. J. Elec
24. Welding techniques for battery cells and resulting electrical contact resistances10.1016/j.est.2015.04.001 ↗
25. LiFePO4 battery pack capacity estimation for electric vehicles based on charging cell voltage curve transformation10.1016/j.jpowsour.2012.10.057 ↗
26. A novel capacity estimation method based on charging curve sections for lithium-ion batteries in electric vehicles10.1016/j.energy.2019.07.059 ↗
27. A facile consistency screening approach to select cells with better performance consistency for commercial 18650 lithium ion cells10.20964/2017.11.01 ↗
28. Differential voltage analysis based state of charge estimation methods for lithium-ion batteries using extended Kalman filter and particle filter10.1016/j.energy.2018.06.113 ↗
29. A quick on-line state of health estimation method for Li-ion battery with incremental capacity curves processed by Gaussian filter10.1016/j.jpowsour.2017.10.092 ↗
30. State of health estimation of second-life LiFePO4 batteries for energy storage applications10.1016/j.jclepro.2018.09.149 ↗
31. A mechanism identification model based state-of-health diagnosis of lithium-ion batteries for energy storage applications10.1016/j.jclepro.2018.05.074 ↗
32. Capacity estimation algorithm with a second-order differential voltage curve for Li-ion batteries with NMC cathodes10.1016/j.energy.2017.06.141 ↗
33. Correlation between capacity and impedance of lithium-ion cells during calendar and cycle life10.1016/j.jpowsour.2015.11.096 ↗
34. Correlation between capacity loss and measurable parameters of lithium-ion batteries10.1016/j.ijepes.2019.03.046 ↗
35. A novel Data-driven fast capacity estimation of spent electric vehicle lithium-ion batteries10.3390/en7128076 ↗
36. Battery energy storage system modeling: a combined comprehensive approach10.1016/j.est.2018.11.012 ↗
37. Cell-balancing currents in parallel strings of a battery system10.1016/j.jpowsour.2016.04.125 ↗
38. Correlations of cell-to-cell parameter variations on current and state-of-charge distributions within parallel-connected lithium-ion cells10.1016/j.jpowsour.2019.226869 ↗
39. Current distribution within parallel-connected battery cells10.1016/j.jpowsour.2016.10.010 ↗
40. Online adaptive parameter identification and state-of-charge coestimation for lithium-polymer battery cells10.1109/TIE.2013.2263774 ↗
41. State-of-Charge estimation for lithium-Ion batteries using a kalman filter based on local linearization10.3390/en8087854 ↗
42. Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application10.1016/j.apenergy.2012.09.030 ↗
43. Open circuit voltage characterization of lithium-ion batteries10.1016/j.jpowsour.2014.06.152 ↗
44. A method for the estimation of the battery pack state of charge based on in-pack cells uniformity analysis10.1016/j.apenergy.2013.08.008 ↗