Towards a wastewater energy recovery system: The utilization of humidified ammonia by a solid oxide fuel cell stack
Source abstract
Abstract
Abstract This study presents the results of investigations on performance and durability of an ammonia-supplied MK352 solid oxide fuel cell stack with electrolyte supported cells and chromium based interconnects. The performance evaluation revealed no significant differences between ammonia and equivalent hydrogen/nitrogen gases as fuel, which was a result of the excellent ammonia conversion rates up to 99.99%. When using high ammonia flow rates, temperature measurements inside the stack revealed a temperature drop due to the endothermic ammonia decomposition of up to 18.8 K, which proceeded preferentially at the fuel inlet region. An 1000 h durability test with humidified ammonia in 80% fuel utilization condition was performed, which resulted in a stack performance degradation rate of about 1.1%/1000 h. Tests with hydrogen/nitrogen fueled reference stacks revealed similar degradation rates during the initial 1000 h. Post-mortem analyses by scanning electron microscopy and energy-dispersive X-ray spectroscopy revealed no significant micro-structural deterioration of the functional layers of the anode, but nitriding effects on the nickel contact meshes and chromium nitrides were found in the material structure of the interconnects. Also, an oxide layer was found between interconnect and contact meshes at the anode, which appears to be the main cause of the performance degradation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. SOFC fuelled with reformed urea10.1016/j.apenergy.2015.04.126 ↗
2. Ammonia as efficient fuel for SOFC10.1016/j.jpowsour.2008.11.037 ↗
3. An ammonia fuel cell using a mixed ionic and electronic conducting electrolyte10.1016/j.jpowsour.2006.06.056 ↗
4. Electrochemical modeling of ammonia-fed solid oxide fuel cells based on proton conducting electrolyte10.1016/j.jpowsour.2008.05.018 ↗
5. A high-performance ammonia-fueled SOFC based on a YSZ thin-film electrolyte10.1016/j.jpowsour.2006.09.093 ↗
6. Electrochemical and catalytic behavior of Ni-based cermet anode for ammonia-fueled SOFCs10.1149/06801.2751ecst ↗
7. A stability study of Ni/Yttria-Stabilized zirconia anode for direct ammonia solid oxide fuel cells10.1021/acsami.5b11122 ↗
8. Experimental analysis of SOFC fuelled by ammonia10.1002/fuce.201300276 ↗
9. Comparative study on ammonia oxidation over Ni-based cermet anodes for solid oxide fuel cells10.1016/j.jpowsour.2015.11.085 ↗
10. Formulation of ammonia decomposition rate in Ni-YSZ anode of solid oxide fuel cells10.1016/j.ijhydene.2016.11.183 ↗
11. Lai · 2007
12. The N-Ni (Nitrogen-Nickel) system10.1007/BF02887159 ↗
13. The reduction of various nitrides under hydrogen: Ni3N, Cu3N, Zn3N2 and Ta3N510.1007/s11244-012-9890-3 ↗
14. Characterization and performance evaluation of ammonia as fuel for solid oxide fuel cells with Ni/YSZ anodes10.1016/j.electacta.2018.12.065 ↗
15. High utilization of humidified ammonia and methane in solid oxide fuel cells: an experimental study of performance and stability10.1149/2.0781912jes ↗
16. Highly efficient conversion of ammonia in electricity by solid oxide fuel cells10.1115/1.2349536 ↗
17. CFY-stack technology: the next design10.1149/06801.2159ecst ↗
18. Long term performance of stacks with chromium-based interconnects (CFY)10.1149/05701.2235ecst ↗
19. Optimization of ESC performance for Co-electrolysis operation10.1149/07801.3025ecst ↗
20. Co-Electrolysis with CFY-Stacks10.1149/07801.3089ecst ↗
21. Performance characterization of a solid oxide cell stack with chromium-based interconnects (CFY)10.1016/j.ijhydene.2017.10.007 ↗
22. Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation10.1016/j.ijhydene.2018.04.230 ↗
23. A high fuel utilizing solid oxide fuel cell cycle with regard to the formation of nickel oxide and power density10.1016/j.jpowsour.2006.08.037 ↗
24. Solid oxide fuel cell performance under operating conditions
25. Ammonia-fed fuel cells: a comprehensive review10.1016/j.rser.2016.01.120 ↗
26. Electrochemical and catalytic behaviors of Ni–YSZ anode for the direct utilization of ammonia fuel in solid oxide fuel cells10.1149/2.1011510jes ↗
27. Catalytic influence of oxide component in Ni-based cermet anodes for ammonia-fueled solid oxide fuel cells10.1002/fuce.201400135 ↗
28. Thermodynamic analysis of ammonia-fed solid oxide fuel cells10.1016/j.jpowsour.2011.10.142 ↗
29. Comparative study on the performance of a SDC-based SOFC fueled by ammonia and hydrogen10.1016/j.jpowsour.2007.05.002 ↗
30. SOFC operating with ammonia: stack test and system analysis10.1016/j.ijhydene.2016.06.070 ↗
31. Micro-kinetic modeling of NH3 decomposition on Ni and its application to solid oxide fuel cells10.1016/j.ces.2011.07.007 ↗
32. M. Kusnezoff, N. Trofimenko, M. Müller, A. Michaelis, Influence of electrode design and contacting layers on performance of electrolyte supported SOFC/SOEC single cells, Materials (Basel, Switzerland) 9 (11), ISSN 1996-1944, doi:10.3390/ma9110906.10.3390/ma9110906 ↗
33. Numerical analysis of flow configurations and electrical contact positions in SOFC single cells and their impact on local effects10.1016/j.ijhydene.2018.11.132 ↗
34. Development and performance evaluation of a direct ammonia fuel cell stack10.1016/j.ces.2019.01.059 ↗
35. Nitridation of chromium powder in ammonia atmosphere10.1007/s12613-015-1076-0 ↗
36. Interconnect corrosion in steam containing fuel gas10.1149/07801.1543ecst ↗