Enhancement thermoelectric generators output power from heat recovery of chimneys by using flaps
Source abstract
Abstract
Abstract This study proposes a new and effective way to improve waste heat recovery from chimneys using thermoelectric generators cooled by natural convection heat sinks. A modified heat sink equipped with a flap fixed at the top of its base is used instead of only the conventional heat sink. A three-dimensional model is presented and solved by using ANSYS Fluent and ANSYS Mechanical for the complete setup. The model simulates completely the heat transfer phenomenon surrounding the first three heat sinks as part of a column of thermoelectric generator modules covering a vertical chimney wall. Also, it simulates the thermal-electric phenomenon inside the thermoelectric generator to predict the thermoelectric generators output power at different operating conditions. The impact of flap's dimensions and material (conductive and non-conductive) on the thermoelectric generator performance is studied. The flap's depth varies from 14 to 50 mm and height from 20 to 35 mm. This modified heat sink achieves about 64% increase in the thermoelectric generators cooling rate, yielding an increase in their output power by 129%. Results prove that sing the proposed modified heat sink in cooling thermoelectric generators (passively) maintains the system simplicity with no running cost and performs more than double its performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Lee · 2016
2. Investigation on combustion and emissions of DME/gasoline mixtures in a spark-ignition engine10.1016/j.fuel.2010.11.033 ↗
3. Comparative assessment of a spark ignition engine fueled with gasoline and raw biogas
4. Study of different heat exchange technologies influence on the performance of thermoelectric generators10.1016/j.enconman.2017.11.011 ↗
5. Performance assessment of a thermoelectric generator applied to exhaust waste heat recovery10.1016/j.applthermaleng.2017.03.052 ↗
6. Experiments and simulations on heat exchangers in thermoelectric generator for automotive application10.1016/j.applthermaleng.2014.07.022 ↗
7. The influence of inner topology of exhaust heat exchanger and thermoelectric module distribution on the performance of automotive thermoelectric generator10.1016/j.enconman.2016.08.009 ↗
8. Performance analysis of a waste heat recovery thermoelectric generation system for automotive application10.1016/j.enconman.2014.11.015 ↗
9. A dynamic model for thermoelectric generator applied to vehicle waste heat recovery10.1016/j.apenergy.2017.11.004 ↗
10. An exhaust heat recovery system utilising thermoelectric generators and heat pipes10.1016/j.applthermaleng.2016.11.019 ↗
11. A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes10.1016/j.applthermaleng.2015.10.081 ↗
12. Liquid metal based thermoelectric generation system for waste heat recovery10.1016/j.renene.2011.06.012 ↗
13. Waste heat recovery of a diesel engine using a thermoelectric generator equipped with customized thermoelectric modules10.1016/j.enconman.2016.07.013 ↗
14. The design of portable automobile refrigerator powered by exhaust heat using thermoelectric10.1016/j.promfg.2018.02.179 ↗
15. Integration of research for an exhaust thermoelectric generator and the outer flow field of a car10.1007/s11664-016-5040-1 ↗
16. Performance enhancement of heat pipes assisted thermoelectric generator for automobile exhaust heat recovery10.1016/j.applthermaleng.2017.09.134 ↗
17. Optimization and characterization of a thermoelectric generator prototype for marine engine application10.1016/j.energy.2017.11.018 ↗
18. A simulation study on a thermoelectric generator for waste heat recovery from a marine engine10.1007/s11664-016-5038-8 ↗
19. Optimization of thermoelectric generator module spacing and spreader thickness used in a waste heat recovery system10.1016/j.applthermaleng.2012.10.024 ↗
20. A study of 3-D numerical simulation and comparison with experimental results on turbulent flow of venting flue gas using thermoelectric generator modules and plate fin heat sink10.1016/j.energy.2013.03.010 ↗
21. Thermoelectric power generation utilizing the waste heat from a biomass boiler10.1007/s11664-013-2570-7 ↗
22. Experimental investigation of the applicability of a thermoelectric generator to recover waste heat from a combustion chamber10.1016/j.apenergy.2015.04.077 ↗
23. 3D study of the impact of aspect ratio and tilt angle on the thermoelectric generator power for waste heat recovery from a chimney10.1016/j.jpowsour.2019.02.020 ↗
24. Optimum fin spacing of rectangular fins on a vertical base in free convection heat transfer10.1007/s00231-007-0329-5 ↗
25. Effect of heat spreader size, microchannel con figuration and nanoparticles on the performance of PV-heat spreader-microchannels system10.1016/j.solener.2019.02.059 ↗
26. Export Grade SP1848 27145 40*40mm, ((n.d.)).
27. White · 2011
28. Heat transfer of Cu-water nanofluid in an enclosure with a heat sink and discrete heat source10.1016/j.euromechflu.2013.12.003 ↗
29. 3D model of thermoelectric generator (TEG) case study: effect of flow regime on the TEG performance10.1016/j.enconman.2018.10.104 ↗
30. Effect of viscous dissipation in natural convection along a heated vertical plate10.1016/j.apm.2004.10.007 ↗
31. A correlation-based transition model using local variables—Part I: model formulation10.1115/1.2184352 ↗
32. A correlation-based transition model using local variables—Part II: test cases and industrial applications10.1115/1.2184353 ↗
33. 2018
34. Thermoelectric properties and extremely low lattice thermal conductivity in p-type Bismuth Tellurides by Pb-doping and PbTe precipitation10.1016/j.jallcom.2016.02.123 ↗
35. Preparation and thermoelectric properties of quaternary bismuth telluride–indium selenide compound10.1016/j.cap.2011.02.026 ↗
36. Çengel · 2011
37. Hünecke · 1997
38. Experimental study on performance of helium high pressure compressors of HTR-10GT10.1016/j.anucene.2018.11.007 ↗
39. Zucker · 2002
40. Taylor · 1997
41. Bergman · 2011