Enhancing membrane electrode assembly performance by improving the porous structure and hydrophobicity of the cathode catalyst layer
Source abstract
Abstract
Abstract Enhancing membrane electrode assembly (MEA) performance is an ongoing pursuit in the drive to meet the increasing demand for fuel cell technology. In the present study, we utilize carbon nanotubes (CNTs) as porosity enhancers and polytetrafluoroethylene (PTFE) as a surface modulating agent to develop a high-performance MEA with a more porous structure and greater hydrophobicity. By systematically investigating the effects of adding CNTs and PTFE, we find that the CNTs not only increase the porosity of the cathode catalyst layer (CCL) but also boost the utilization of the platinum(Pt) catalyst by increasing the exposure of Pt active sites and lowering the charge transfer resistance, due to CNTs’ superior electronic conductivity compared with carbon black. The hydrophobicity of the CCL is adjusted by adding an appropriate amount of PTFE, resulting in much better water management. The best-performing MEA contains 15 wt% CNTs and 30 wt% PTFE in the CCL. At voltages of 0.7 and 0.6 V, the discharge current densities reach 1000 and 1550 mA cm−2, respectively, with a maximum power density of 949 mW cm−2, compared to 750 and 1200 mA cm−2 and 789 mW cm−2 using a MEA without CNTs and PTFE. Our optimized MEA also exhibits significantly improved performance at low backpressure due to the increase in CCL porosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Fast stack activation procedure and effective long-term storage for high-performance polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2016.08.006 ↗
2. High-performance fuel cell with stretched catalyst-coated membrane: one-step formation of cracked electrode
3. Synthesis of durable small-sized bilayer Au@Pt nanoparticles for high performance PEMFC catalysts10.1016/j.electacta.2017.01.083 ↗
4. Stability of high-performance Pt-based catalysts for oxygen reduction reactions10.1002/adma.201705332 ↗
5. Three-dimensional simulation of water management for high-performance proton exchange membrane fuel cell10.4271/2018-01-1309 ↗
6. A review on unitized regenerative fuel cell technologies, part-A: unitized regenerative proton exchange membrane fuel cells10.1016/j.rser.2016.07.046 ↗
7. Fe–N–C electrocatalyst with dense active sites and efficient mass transport for high-performance proton exchange membrane fuel cells10.1038/s41929-019-0237-3 ↗
8. Iron-based cathode catalyst with enhanced power density in polymer electrolyte membrane fuel cells10.1038/ncomms1427 ↗
9. Studies on structure property relations of efficient decal substrates for industrial grade membrane electrode assembly development in pemfc10.1038/s41598-018-30215-0 ↗
10. Nano-engineering of a 3D-ordered membrane electrode assembly with ultrathin Pt skin on open-walled PdCo nanotube arrays for fuel cells10.1039/C7TA10901F ↗
11. A novel membrane electrode assembly design for proton exchange membrane fuel cells_ Characterization and performance evaluation10.1016/j.electacta.2019.01.064 ↗
12. Membrane electrode assembly for energy harvesting from salinity gradient by reverse electrodialysis10.1016/j.memsci.2018.01.006 ↗
13. Electrode for proton exchange membrane fuel cells: a review10.1016/j.rser.2018.03.007 ↗
14. Membrane electrode assemblies for PEM fuel cells: a review of functional graded design and optimization10.1016/j.energy.2019.04.084 ↗
15. Performance of a MEA using patterned membrane with a directly coated electrode by the bar-coating method in a direct methanol fuel cell10.1016/j.ijhydene.2018.04.086 ↗
16. High-performance and durable cathode catalyst layer with hydrophobic C@PTFE particles for low-Pt loading membrane assembly electrode of PEMFC10.1016/j.enconman.2019.04.014 ↗
17. Design of Pt-C/Fe-N-S-C cathode dual catalyst layers for proton exchange membrane fuel cells under low humidity10.1016/j.electacta.2018.11.048 ↗
18. Minimizing mass-transport loss in proton exchange membrane fuel cell by freeze-drying of cathode catalyst layers10.1016/j.jpowsour.2019.04.094 ↗
19. A locally resolved investigation on direct methanol fuel cell uneven components fading: local cathode catalyst layer tuning for homogeneous operation and reduced degradation rate10.1016/j.jpowsour.2018.09.094 ↗
20. A novel cathode structure with double catalyst layers and low Pt loading for proton exchange membrane fuel cells10.1016/j.ijhydene.2013.02.118 ↗
21. High performance polymer electrolyte membrane fuel cells (PEMFCs) with gradient Pt nanowire cathodes prepared by decal transfer method10.1016/j.ijhydene.2015.01.009 ↗
22. Direct transfer of micro-molded electrodes for enhanced mass transport and water management in PEMFC10.1016/j.elecom.2010.09.015 ↗
23. Hydrophilic-hydrophobic dual catalyst layers for proton exchange membrane fuel cells under low humidity10.1016/j.elecom.2018.11.003 ↗
24. A hydrophobic blend binder for anti-water flooding of cathode catalyst layers in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2011.07.116 ↗
25. Anti-flooding cathode catalyst layer for high performance PEM fuel cell10.1016/j.elecom.2009.02.022 ↗
26. Gas diffusion layer design focusing on the structure of the contact face with catalyst layer against water flooding in polymer electrolyte fuel cell10.1016/j.jpowsour.2010.05.067 ↗
27. Tuning hydrophobic-hydrophilic balance of cathode catalyst layer to improve cell performance of proton exchange membrane fuel cell (PEMFC) by mixing polytetrafluoroethylene (PTFE)10.1016/j.electacta.2018.04.213 ↗
28. Investigation of a novel catalyst coated membrane method to prepare low-platinum-loading membrane electrode assemblies for PEMFCs10.1002/fuce.200800114 ↗
29. Enhanced performance of proton exchange membrane fuel cell by introducing nitrogen-doped CNTs in both catalyst layer and gas diffusion layer10.1016/j.electacta.2017.08.160 ↗
30. Improved conductivity and capacitance of interdigital carbon microelectrodes through integration with carbon nanotubes for micro-supercapacitors10.1007/s12274-016-1137-3 ↗