Graphene and reduced graphene oxide based microporous layers for high-performance proton-exchange membrane fuel cells under varied humidity operation
Source abstract
Abstract
Abstract Cathode microporous layers (MPLs) play an important role in the performance of proton exchange membrane (PEM) fuel cells through two-phase flow and interfacial effects. In this study, alternative graphene-based MPLs are developed and characterized by ex-situ methods and fuel cell polarization experiments at 100% and 20% cathode relative humidity (RH). The studied MPLs include: graphene (GN), reduced graphene oxide (RGO), graphite (GR) and their composites with conventional carbon black (CB). GN and RGO promote interfacial contact and adhesion to the catalyst layer (CL). These MPLs show improved kinetic and ohmic polarization compared to CB, but limit oxygen gas transport at 100% RH due to excessive water retention. The addition of CB to create composite MPLs, however, mitigates water retention near the CL by capillary suction. Hence, maximum power densities improve by 68% and 22% compared to the original GN and RGO MPLs, and is also 28% higher for the GN + CB MPL than for the CB MPL alone. At 20% RH, the graphene-composite MPLs demonstrate remarkable performance preservation (1.4 mV h−1 voltage decrease for GN + CB vs. 464 mV h−1 for CB at 1000 mA cm−2). Through extensive physical and performance evaluations, this study provides a comprehensive understanding of how graphene materials behave in MPLs under varied humidity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Hydrogen and proton exchange membrane fuel cells for clean road transportation10.1016/j.jiec.2011.05.011 ↗
2. Modelling the effect of inhomogeneous compression of GDL on local transport phenomena in a PEM fuel cell10.1002/fuce.200700058 ↗
3. A review of polymer Electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
4. Effect of gas diffusion layer with double-side microporous layer coating on proton exchange membrane fuel cell performance under different air inlet relative humidity10.1016/S1452-3981(23)11008-X ↗
5. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer Electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2013.10.066 ↗
6. Effect of cathode microporous layer composition on proton exchange membrane fuel cell performance under different air inlet relative humidity10.1016/j.jpowsour.2013.01.079 ↗
7. Enhanced low-humidity performance in a proton exchange membrane fuel cell by the insertion of microcrystalline cellulose between the gas diffusion layer and the anode catalyst layer10.1016/j.ijhydene.2015.09.084 ↗
8. Application of water barrier layers in a proton exchange membrane fuel cell for improved water management at low humidity conditions10.1016/j.ijhydene.2010.12.108 ↗
9. An operationally flexible fuel cell based on quaternary ammonium-biphosphate Ion pairs10.1038/nenergy.2016.120 ↗
10. Operation of thin nafion-based self-humidifying membranes in proton exchange membrane fuel cells with dry H2 and O210.1016/j.jpowsour.2004.07.010 ↗
11. The study of PTFE/Nafion/Silicate membranes operating at low relative humidity and elevated temperature10.1016/j.jcice.2008.03.012 ↗
12. On the role of the silica-containing catalyst layer for proton exchange membrane fuel cells10.1016/j.energy.2014.03.009 ↗
13. Characterization of self-humidifying ability of SiO2-supported Pt catalyst under low humidity in PEMFC10.1016/j.apcatb.2014.12.026 ↗
14. Self-humidifying membrane electrode assembly prepared by adding PVA as hygroscopic agent in anode catalyst layer10.1016/j.ijhydene.2012.05.083 ↗
15. Membrane electrode assembly with doped polyaniline interlayer for proton exchange membrane fuel cells under low relative humidity conditions10.1016/j.jpowsour.2009.04.002 ↗
16. Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer Electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2015.02.115 ↗
17. Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer Electrolyte fuel cells10.1016/S0378-7753(02)00112-X ↗
18. Diffusion layer parameters influencing optimal fuel cell performance10.1016/S0378-7753(99)00489-9 ↗
19. Effects of the diffusion layer characteristics on the performance of polymer Electrolyte fuel cell electrodes10.1023/A:1017547112282 ↗
20. Optimal microporous layer for proton exchange membrane fuel cell10.1016/j.jpowsour.2010.03.041 ↗
21. Preparing gas-diffusion layers of PEMFCs with a dry deposition technique10.1149/1.1854119 ↗
22. Novel application of hicon black in PEMFC microporous sublayer: effects of composition and subsequent membrane selection10.1016/j.renene.2010.07.002 ↗
23. Nanostructured gas diffusion and catalyst layers for proton exchange membrane fuel cells10.1149/1.2422751 ↗
24. Carbon nanotubes grown in situ on carbon paper as a microporous layer for proton exchange membrane fuel cells10.1016/j.ijhydene.2015.04.129 ↗
25. Investigation of porous carbon and carbon nanotube layer for proton exchange membrane fuel cells10.1016/j.apenergy.2012.08.045 ↗
26. Carbon nano-chain and carbon nano-fibers based gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2007.02.064 ↗
27. Fabrication of a carbon nanofiber sheet as a micro-porous layer for proton exchange membrane fuel cells10.1016/j.jpowsour.2010.07.032 ↗
28. Improving of micro porous layer based on advanced carbon materials for high temperature proton exchange membrane fuel cell electrodes10.1002/fuce.201400139 ↗
29. A new microporous layer material to improve the performance and durability of polymer Electrolyte membrane fuel cells10.1039/C5RA18552A ↗
30. Novel graphene foam microporous layers for PEM fuel cells: interfacial characteristics and comparative performance10.1002/fuce.201500031 ↗
31. Electrochemically produced graphene for microporous layers in fuel cells10.1002/cssc.201600351 ↗
32. Graphene for transparent conductors
33. A Bi-functional micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.jpowsour.2006.06.064 ↗
34. Development of carbon nanotubes based gas diffusion layers by in situ chemical vapor deposition process for proton exchange membrane fuel cells10.1016/j.jpowsour.2009.03.022 ↗
35. Characterisation of nanocarbon-based gas diffusion media by electrochemical impedance spectroscopy10.1002/fuce.200900126 ↗
36. The synergy between multi-wall carbon nanotubes and Vulcan XC72R in microporous layers10.1016/j.ijhydene.2009.08.092 ↗
37. High-yield graphene production by electrochemical exfoliation of graphite10.1016/j.carbon.2014.01.012 ↗
38. Graphene oxide, highly reduced graphene oxide, and graphene: versatile building blocks for carbon-based materials10.1002/smll.200901934 ↗
39. The effect of pretreatment of Vulcan XC-72R carbon on morphology and electrochemical oxygen reduction kinetics of supported Pd nano-particle in acidic electrolyte10.1016/j.jelechem.2010.05.021 ↗
40. Carbon Canada
41. Effect of PTFE content in microporous layer on water management in PEM fuel cells10.1016/j.jpowsour.2007.11.055 ↗
42. Preparation of water management layer and effects of its composition on performance of PEMFCs10.1016/j.enconman.2007.12.020 ↗
43. Effect of carbon loading in microporous layer on PEM fuel cell performance10.1016/j.jpowsour.2006.09.020 ↗
44. Effect of PTFE content in gas diffusion media and microlayer on the performance of PEMFC tested under ambient pressure10.1002/fuce.200600032 ↗
45. Harvard Universtiy. A Summary of Error Propagation, Department of Physics http://ipl.physics.harvard.edu/wp-uploads/2014/01/ps2_fa13_err.pdf (accessed Oct 28, 2016).
46. Water management in a PEMFC: water transport mechanism and material degradation in gas diffusion layers10.1002/fuce.201000172 ↗
47. Preparation of novel 3D graphene networks for supercapacitor applications10.1002/smll.201100990 ↗
48. Tortuosity-porosity relation in porous media flow10.1103/PhysRevE.78.026306 ↗
49. Two-phase transport and the role of micro-porous layer in polymer Electrolyte fuel cells10.1016/j.electacta.2004.04.027 ↗
50. Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium10.1016/S0017-9310(03)00305-3 ↗
51. Micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.electacta.2006.01.048 ↗
52. Stable nafion-functionalized graphene dispersions for transparent conducting films
53. Electro-active graphene-nafion actuators10.1016/j.carbon.2010.11.047 ↗
54. Analysis of oxygen reduction reaction activity of Pt/C catalysts for actual PEFC MEAs10.1252/jcej.08we203 ↗
55. The pristine graphene produced by liquid exfoliation of graphite in mixed solvent and its application to determination of dopamine10.1016/j.jcis.2017.11.038 ↗
56. From graphite to graphene: direct liquid-phase exfoliation of graphite to produce single- and few-layered pristine graphene10.1039/c3ta12212c ↗
57. Reduced graphene oxide film with record-high conductivity and mobility
58. Highly conductive free-standing reduced graphene oxide thin films for fast photoelectric devices10.1016/j.carbon.2017.01.047 ↗
59. Highly conductive reduced graphene oxide transparent ultrathin film through joule-heat induced direct reduction10.1007/s10854-016-5676-x ↗