journal article·2019-02

Ether-free polymeric anion exchange materials with extremely low vanadium ion permeability and outstanding cell performance for vanadium redox flow battery (VRFB) application

Min Suc Cha, Sang Woo Jo, Seung Hui Han, Soo Hyun Hong, Soonyong So, Tae-Ho Kim, Seong-Geun Oh, Young Taik Hong, Jang Yong Lee

Publisher page

Abstract

Abstract Ether-free poly(p-phenylene)-based anion exchange membrane materials with outstanding vanadium ion blocking properties are reported. The synthesized ionomers with a rigid backbone structure show small dimensional variations despite the high ion exchange capacities. Among the synthesized membranes, the QPPP-2 membrane with ion exchange capacity of 2.1 meq·g−1 exhibits high anion (OH−, SO42−, and Cl−) conductivity. The QPPP-2 membrane shows an extremely low diffusion coefficient (2.12 × 10−9 cm2 min−1) for VO2+, which is much lower than that of Nafion 115 (2.88 × 10−6 cm2 min−1), indicating the vanadium ion blocking property of QPPP-2. Moreover, the chemical and operational stabilities of the membranes are investigated via ex situ soaking tests in 0.1 M VO2+ solution and in situ operation tests for 100 cycles, respectively. The vanadium redox flow battery single cell assembled with the QPPP-2 membrane exhibits a coulombic efficiency of 99%, voltage efficiency of 87%, and energy efficiency of 86% during 100 cycles at 80 mA cm−2. The excellent chemical, morphological, and electrochemical properties of the QPPP-2 membrane make it suitable for use in vanadium redox flow battery.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Ion exchange membranes for vanadium redox flow battery (VRB) applications10.1039/c0ee00770f ↗
2. Vanadium electrolyte studies for the vanadium redox battery—a review10.1002/cssc.201600102 ↗
3. Recent progress in redox flow battery Research and development10.1002/adfm.201200694 ↗
4. Vanadium redox battery: positive half-cell electrolyte studies10.1016/j.jpowsour.2008.12.113 ↗
5. Ultra-high proton/vanadium selectivity for hydrophobic polymer membranes with intrinsic nanopores for redox flow battery10.1002/aenm.201600517 ↗
6. Insights into the impact of the nafion membrane pretreatment process on vanadium flow battery performance10.1021/acsami.6b03529 ↗
7. Multi-block copolymers based on poly(p-phenylene)s with excellent durability and fuel cell performance10.1016/j.memsci.2015.04.013 ↗
8. Nanocrack-regulated self-humidifying membranes10.1038/nature17634 ↗
9. Studies on pressure losses and flow rate optimization in vanadium redox flow battery10.1016/j.jpowsour.2013.09.071 ↗
10. Highly conductive and durable poly(arylene ether sulfone) anion exchange membrane with end-group cross-linking10.1039/C6EE03079C ↗
11. An aqueous, polymer-based redox-flow battery using non-corrosive, safe, and low-cost materials10.1038/nature15746 ↗
12. A comparative study of Nafion series membranes for vanadium redox flow batteries10.1016/j.memsci.2016.03.007 ↗
13. Materials, system designs and modelling approaches in techno-economic assessment of all-vanadium redox flow batteries – a review10.1016/j.jpowsour.2017.11.058 ↗
14. Cross-linked sulfonated poly(arylene ether sulfone) membranes formed by in situ casting and click reaction for applications in fuel cells10.1021/ma5021616 ↗
15. Poly(p-phenylene)-based membrane materials with excellent cell efficiencies and durability for use in vanadium redox flow batteries10.1039/C7TA03131A ↗
16. A highly selective proton exchange membrane with highly ordered, vertically aligned, and subnanosized 1D channels for redox flow batteries10.1016/j.jpowsour.2018.10.043 ↗
17. Densely quaternized poly(arylene ether)s with distinct phase separation for highly anion-conductive membranes10.1016/j.jpowsour.2018.03.060 ↗
18. Crosslinked anion exchange membranes with primary diamine-based crosslinkers for vanadium redox flow battery application10.1016/j.jpowsour.2017.07.068 ↗
19. Preparation and characterization of crosslinked anion exchange membrane (AEM) materials with poly(phenylene ether)-based short hydrophilic block for use in electrochemical applications10.1016/j.memsci.2017.02.015 ↗
20. Highly proton conductive, dense polybenzimidazole membranes with low permeability to vanadium and enhanced H2SO4 absorption capability for use in vanadium redox flow batteries10.1039/C6TA05080H ↗
21. V5+ degradation of sulfonated Radel membranes for vanadium redox flow batteries10.1039/c3cp52035h ↗
22. Anion exchange membrane fuel cells: current status and remaining challenges10.1016/j.jpowsour.2017.08.010 ↗
23. Degradation of imidazolium- and quaternary ammonium-functionalized poly(fluorenyl ether ketone sulfone) anion exchange membranes10.1021/am301557w ↗
24. Exploring different cationic alkyl side chain designs for enhanced alkaline stability and hydroxide ion conductivity of anion-exchange membranes10.1021/acs.macromol.5b01302 ↗
25. A practical method for measuring the ion exchange capacity decrease of hydroxide exchange membranes during intrinsic degradation10.1016/j.jpowsour.2017.07.106 ↗
26. Design of flexible polyphenylene proton-conducting membrane for next-generation fuel cells10.1126/sciadv.aao0476 ↗
27. Mechanism of polysulfone-based anion exchange membranes degradation in vanadium flow battery10.1021/acsami.5b05840 ↗
28. Mechanistic analysis of ammonium cation stability for alkaline exchange membrane fuel cells10.1039/C4TA03300K ↗
29. Systematic alkaline stability study of polymer backbones for anion exchange membrane applications10.1021/acs.macromol.5b02550 ↗
30. Synthesis and investigation of random-structured ionomers with highly sulfonated multi-phenyl pendants for electrochemical applications10.1016/j.memsci.2016.03.018 ↗
31. Synthesis and characterization of poly(phenylene)-based anion exchange membranes for alkaline fuel cells10.1021/ma901538c ↗
32. Exploring backbone-cation alkyl spacers for multi-cation side chain anion exchange membranes10.1016/j.jpowsour.2017.06.020 ↗
33. Alkaline stability of poly(phenylene)-based anion exchange membranes with various cations10.1002/polb.23149 ↗
34. Crosslinked poly (ether ether ketone) hydroxide exchange membranes with improved conductivity10.1016/j.memsci.2014.01.068 ↗
35. Structure–property relationships in hydroxide-exchange membranes with cation strings and high ion-exchange capacity10.1002/cssc.201501035 ↗
36. Novel hydrophilic-hydrophobic block copolymer based on cardo poly(arylene ether sulfone)s with bis-quaternary ammonium moieties for anion exchange membranes10.1016/j.memsci.2016.06.036 ↗
37. Phase separation and ion conductivity in the bulk and at the surface of anion exchange membranes with different ion exchange capacities at different humidities10.1016/j.jpowsour.2017.06.081 ↗
38. Sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes: composition and morphology effects on the methanol permeability10.1016/j.memsci.2004.06.035 ↗
39. Highly electrocatalytic flexible nanofiber for improved vanadium-based redox flow battery cathode electrodes10.1039/c3ra40463c ↗