Electrical double layer supercapacitors based on graphene nanoplatelets electrodes in organic and aqueous electrolytes: Effect of binders and scalable performance
Source abstract
Abstract
The effect of some commercial binders, carboxymethyl cellulose, polyvinylidene fluoride, modified styrene-butadiene copolymer and vinylidene fluoride-hexafluoropropene copolymer on the capacitive performance of symmetric Graphene nanoplatelets (GnP) electrodes has been investigated in both organic and aqueous electrolytes. Surface area, pore size distribution, resistance and wetting behaviour of the electrodes have been measured and the effects of these factors have been studied to rationalise their electrical double layer capacitor (EDLC) performances. The most homogeneous distribution and lowest aggregation of the GnP electrode is obtained with CMC binder. Among the electrodes, it has also shown better capacitive behaviour in both aqueous and organic electrolyte due to its higher surface area, and higher mesoporous and microporous distributions than the other electrodes. To investigate scalable performance of the GnP electrodes, CMC binder electrodes have been scaled up from coin cell to pouch cell size. The coin cell electrodes showed higher capacitance than the pouch cell up to current densities of 50 A g−1. The pouch cell has exhibited the higher capacitance at 50 A g−1 and better capacitance retention, which shows that the pouch cell is a better charge storage device than coin cell at high current densities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Fast charging self-powered electric double layer capacitor10.1016/j.jpowsour.2016.11.083 ↗
2. Ultrahigh performance supercapacitors utilizing core–shell nanoarchitectures from a metal–organic framework-derived nanoporous carbon and a conducting polymer10.1039/C6SC01429A ↗
3. Controlled chemical vapor deposition for synthesis of nanowire arrays of metal–organic frameworks and their thermal conversion to carbon/metal oxide hybrid materials10.1021/acs.chemmater.8b00836 ↗
4. Hierarchical porous carbons with layer-by-layer motif architectures from confined soft-template self-assembly in layered materials
5. A review of supercapacitor modeling, estimation, and applications: a control/management perspective10.1016/j.rser.2017.05.283 ↗
6. Perovskite solar cell – electrochemical double layer capacitor interplay10.1016/j.electacta.2017.11.132 ↗
7. The development supercapacitor from activated carbon by electroless plating-A review10.1016/j.rser.2014.10.068 ↗
8. Recent development in the production of activated carbon electrodes from agricultural waste biomass for supercapacitors: a review
9. Three-dimensional structures of graphene/polyaniline hybrid films constructed by steamed water for high-performance supercapacitors10.1016/j.jpowsour.2016.11.068 ↗
10. A review for aqueous electrochemical supercapacitors
11. Polyvinylpyrrolidone as binder for castable supercapacitor electrodes with high electrochemical performance in organic electrolytes10.1016/j.jpowsour.2014.05.031 ↗
12. The effect of binders on the rheological properties and the microstructure formation of lithium-ion battery anode slurries10.1016/j.jpowsour.2015.09.009 ↗
13. Effect of different binders on the electrochemical performance of metal oxide anode for lithium-ion batteries
14. Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries10.1126/science.aal4373 ↗
15. Unveiling the roles of binder in the mechanical integrity of electrodes for lithium-ion batteries10.1149/2.088309jes ↗
16. Polyvinylpyrrolidone/polyvinyl butyral composite as a stable binder for castable supercapacitor electrodes in aqueous electrolytes10.1016/j.jpowsour.2014.12.151 ↗
17. Influence of binders, carbons, and solvents on the stability of phosphorus anodes for Li-ion batteries10.1021/acsami.6b07931 ↗
18. Investigation of different binding agents for nanocrystalline anatase TiO2 anodes and its application in a novel, green lithium-ion battery10.1016/j.jpowsour.2012.07.142 ↗
19. Natural cellulose as binder for lithium battery electrodes10.1016/j.jpowsour.2011.09.102 ↗
20. A leavening strategy to prepare reduced graphene oxide foams10.1002/adma.201200197 ↗
21. A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties10.1016/j.jpowsour.2014.04.115 ↗
22. Small things make a big difference: binder effects on the performance of Li and Na batteries10.1039/C4CP02475C ↗
23. The effect of binders on the performance and degradation of the lithium/sulfur battery assembled in the discharged state10.1149/2.0161701jes ↗
24. Effects of various binders on supercapacitor performances10.20964/2016.10.04 ↗
25. Cellulose and activated carbon based flexible electrical double-layer capacitor electrode: preparation and characterization10.1016/j.energy.2016.12.038 ↗
26. Comparison between cylindrical and prismatic lithium-ion cell costs using a process based cost model10.1016/j.jpowsour.2016.11.054 ↗
27. Influence of cell design on impedance characteristics of cylindrical lithium-ion cells: a model-based assessment from electrode to cell level10.1016/j.est.2017.05.002 ↗
28. Electrochemical–thermal model of pouch-type lithium-ion batteries10.1016/j.electacta.2017.06.164 ↗
29. Flexible rechargeable lithium ion batteries: advances and challenges in materials and process technologies10.1039/C4TA00716F ↗
30. Energies, nonhumidified fuel cells using N-ethyl-N-methyl-pyrrolidinium fluorohydrogenate ionic liquid-poly(vinylidene fluoride-hexafluoropropylene)
31. Quenched solid density functional theory and pore size analysis of micro-mesoporous carbons10.1016/j.carbon.2009.01.050 ↗
32. Revaluation of performance of electric double-layer capacitors from constant-current charge/discharge and cyclic voltammetry
33. Super long life supercapacitors based on the construction of nanohoneycomb like strongly coupled CoMoO4-3D graphene hybrid electrodes10.1002/adma.201304148 ↗
34. Raman spectroscopy of graphene-based materials and its applications in related devices10.1039/C6CS00915H ↗
35. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
36. Effect of calendering LiFePO4 electrodes10.1149/2.029211jes ↗
37. Role of humidity in reducing sliding friction of multilayered graphene10.1016/j.carbon.2015.01.053 ↗
38. Multiferroic PVDF–Fe3O4 hybrid films with reduced graphene oxide and ZnO nanofillers10.1039/C5RA26983K ↗
39. Facile fabrication of carboxymethyl cellulose sodium/graphene oxide hydrogel microparticles for water purification10.1039/C6RA06438H ↗
40. Laser heating effect on Raman spectra of styrene–butadiene rubber/multiwalled carbon nanotube nanocomposites10.1016/j.cplett.2011.11.082 ↗
41. High-yield production of graphene by liquid-phase exfoliation of graphite10.1038/nnano.2008.215 ↗
42. Improving antifouling ability and hemocompatibility of poly(vinylidene fluoride) membranes by polydopamine-mediated ATRP10.1039/C5TB01336D ↗
43. Exploiting XPS for the identification of sulfides and polysulfides10.1039/C5RA14915K ↗
44. The influence of intercalated oxygen on the properties of graphene on polycrystalline Cu under various environmental conditions10.1039/C4CP04025B ↗
45. Alternating assembly of Ni–Al layered double hydroxide and graphene for high-rate alkaline battery cathode10.1039/C5CC01767J ↗
46. Probing the thermal deoxygenation of graphene oxide using high-resolution in situ X-ray-based spectroscopies10.1021/jp203741y ↗
47. A novel zwitterionic polyelectrolyte grafted PVDF membrane for thoroughly separating oil from water with ultrahigh efficiency10.1039/c3ta01598j ↗
48. Facile synthesis of a reduced graphene oxide wrapped porous NiCo2O4 composite with superior performance as an electrode material for supercapacitors10.1039/C7TA03251J ↗
49. Synthesis and characterization of graphene hollow spheres for application in supercapacitors10.1039/c3ta12789c ↗
50. Zeolitic imidazolate framework-derived nitrogen-doped porous carbons as high performance supercapacitor electrode materials10.1016/j.carbon.2014.12.064 ↗
51. Capacitance and surface of carbons in supercapacitors10.1016/j.carbon.2017.06.083 ↗
52. Effect of polymer binders on graphene-based free-standing electrodes for supercapacitors10.1016/j.electacta.2018.02.072 ↗
53. All solid supercapacitor based on activated carbon and poly [2,5-benzimidazole] for high temperature application10.1016/j.electacta.2011.10.102 ↗
54. Graphene-based supercapacitor with an ultrahigh energy density10.1021/nl102661q ↗
55. Lin · 2012
56. Mesoporous materials for energy conversion and storage devices
57. Monodisperse nickel/cobalt oxide composite hollow spheres with mesoporous shell for hybrid supercapacitor: a facile fabrication and excellent electrochemical performance10.1016/j.compositesb.2017.01.041 ↗
58. The effect of binders on the performance and degradation of the lithium/sulfur battery assembled in the discharged state10.1149/2.0161701jes ↗
59. Moving to aqueous binder: a valid approach to achieving high‐rate capability and long‐term durability for sodium‐ion battery10.1002/advs.201700768 ↗
60. A high-performance supercapacitor electrode based on N-doped porous graphene10.1016/j.jpowsour.2018.03.055 ↗
61. Empirical analysis of the contributions of mesopores and micropores to the double-layer capacitance of carbons10.1021/jp905975q ↗
62. Graphene-enhanced electrodes for scalable supercapacitors10.1016/j.electacta.2017.10.056 ↗
63. Energy &Environmental Science, Integrated energy storage and electrochromic function in one flexible device: an energy storage