In-plane and through-plane non-uniform carbon corrosion of polymer electrolyte fuel cell cathode catalyst layer during extended potential cycles
Source abstract
Abstract
Abstract The impact of electrochemical carbon corrosion via potential cycling durability tests mimicking start-stop operation events on the microstructure of the cathode catalyst layer in polymer electrolyte fuel cells (PEFCs) is investigated using focused ion beam (FIB) fabrication without/with the pore-filling technique and subsequent scanning electron microscope (SEM) observations. FIB/SEM investigations without pore-filling reveals that the durability test induces non-uniform cathode shrinking across the in-plane direction; the thickness of the catalyst layer decreases more under the gas flow channel compared to the area under the rim of the flow field. Furthermore, FIB/SEM investigations with the pore-filling technique reveal that the durability test also induces non-uniform cathode shrinking in the through-plane direction; the pores in the area close to the membrane are more shrunken compared with those close to the microporous layer. In particular, a thin area (1–1.5 μm) close to the membrane is found to be severely damaged; it includes closed pores that hinder mass transport through the catalyst layer. It is suggested that uneven carbon corrosion and catalyst layer compaction are responsible for the performance loss during potential cycling operation of PEFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Understanding the mechanism of membrane electrode assembly degradation by carbon corrosion by analyzing the microstructural changes in the cathode catalyst layers and polarization losses in proton exchange membrane fuel cell10.1016/j.electacta.2012.07.117 ↗
2. Corrosion of carbon supports at cathode during hydrogen/air replacement at anode studied by visualization of oxygen partial pressures in a PEFC—start-up/shut-down simulation10.1016/j.jpowsour.2010.11.092 ↗
3. Characterization of carbon corrosion-induced structural damage of PEM fuel cell cathode electrodes caused by local fuel starvation10.1149/1.2956198 ↗
4. PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode10.1016/j.jpowsour.2005.10.059 ↗
5. A reverse-current decay mechanism for fuel cells10.1149/1.1896466 ↗
6. The effect of platinum on carbon corrosion behavior in polymer electrolyte fuel cells10.1016/j.electacta.2011.06.093 ↗
7. Thermal degradation of the support in carbon-supported platinum electrocatalysts for PEM fuel cells10.1016/j.carbon.2004.09.004 ↗
8. Microstructural changes of membrane electrode assembliesduring PEFC durability testing at high humidity conditions10.1149/1.1873492 ↗
9. A review of PEM fuel cell duraility: material degradation, local hetereogeneities of aging and possible mitigation strategies10.1002/wene.113 ↗
10. Transmission electron microscopy observation of corrosion behaviors of platinized carbon blacks under thermal and electrochemical conditions10.1149/1.3391737 ↗
11. Investigation of carbon corrosion behavior and kinetics in proton exchange membrane fuel cell cathode electrodes10.1149/2.120306jes ↗
12. Relationship between carbon corrosion and positive electrode potential in a proton-exchange membrane fuel cell during start/stop operation10.1016/j.jpowsour.2009.03.039 ↗
13. Characterizing the structural degradation in a PEMFC cathode catalyst layer: carbon corrosion10.1149/1.3139963 ↗
14. Transmission electron microscopy observation of corrosion behaviors of platinized carbon blacks under thermal and electrochemical conditions10.1149/1.3391737 ↗
15. Microstructure effects on the electrochemical corrosion of carbon materials and carbon-supported Pt catalysts10.1016/j.electacta.2010.07.047 ↗
16. Rotating disk electrode investigations of fuel cell catalyst degradation due to potential cycling in acid electrolyte10.1149/1.2353752 ↗
17. Investigation of the carbon corrosion process for polymer electrolyte fuel cells using a rotating disk electrode technique10.1149/1.3435272 ↗
18. Characterization of carbon corrosionin a segmented PEM fuel cell10.1149/1.3635608 ↗
19. Long-term cell degradation mechanism in high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2012.02.098 ↗
20. A reverse-current decay mechanism for fuel cells10.1149/1.1896466 ↗
21. 3D visualisation of PEMFC electrode structures using FIB nanotomography10.1002/fuce.201000133 ↗
22. Characterization of pore network structure in catalyst layers of polymer electrolyte fuel cells10.1016/j.jpowsour.2013.08.049 ↗
23. 3D imaging of catalyst support corrosion in polymer electrolyte fuel cells10.1021/jp203016u ↗
24. Microstructural pore analysis of the catalyst layer in a polymer electrolyte membrane fuel cell: a combination of resin pore-filling and FIB/SEM10.1016/j.ijhydene.2015.09.080 ↗
25. Cross-sectional observation of nanostructured catalyst layer of polymer electrolyte fuel cell using FIB/SEM10.1016/j.jpowsour.2015.01.085 ↗
26. Membrane and catalyst performance targets for automotive fuel cells by FCCJ membrane10.1149/1.3635611 ↗
27. Study of fuel cell structure and heating method development of JARI's standard single cell10.1016/j.jpowsour.2005.02.090 ↗
28. Failure analysis of fuel cell electrodes using three-dimensional multilength scale X-ray computed tomography10.1016/j.jpowsour.2016.08.092 ↗
29. Degradation heterogeneities induced by repetitive start/stop events in proton exchange membrane fuel cell: inlet vs. outlet and channel vs. land10.1016/j.apcatb.2013.03.021 ↗
30. Oxygen transport resistance correlated to liquid water saturation in the gas diffusion layer of PEM fuel cells10.1016/j.ijheatmasstransfer.2013.12.059 ↗