journal article·2016-10

Capillary suspensions as beneficial formulation concept for high energy density Li-ion battery electrodes

Boris Bitsch, Tobias Gallasch, Melanie Schroeder, Markus Börner, Martin Winter, Norbert Willenbacher

Publisher page

Abstract

Abstract We introduce a novel formulation concept to prepare high capacity graphite electrodes for lithium ion batteries. The concept is based on the capillary suspension phenomenon: graphite and conductive agent are dispersed in an aqueous binder solution and the organic solvent octanol is added as immiscible, secondary fluid providing the formation of a sample-spanning network resulting in unique stability and coating properties. No additional processing steps compared to conventional slurry preparation are required. The resulting ultra-thick electrodes comprise mass loadings of about 16.5 mg cm −2 , uniform layer thickness, and superior edge contours. The adjustment of mechanical energy input ensures uniform distribution of the conductive agent and sufficient electronic conductivity of the final dry composite electrode. The resulting pore structure is due to the stable network provided by the secondary fluid which evaporates residue-free during drying. Constant current-constant potential (CC-CP) cycling clearly indicates that the corresponding microstructure significantly improves the kinetics of reversible Li + (de-) intercalation. A double layer electrode combining a conventionally prepared layer coated directly onto the Cu current collector with an upper layer stabilized with octanol was prepared applying wet-on-wet coating. CC-CP cycling data confirms that staged porosity within the electrode cross section results in superior electrochemical performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Current research trends and prospects among the various materials and designs used in lithium-based batteries10.1007/s10800-013-0533-6 ↗
2. Was braucht man für eine Super-Batterie?10.1002/ciuz.201500713 ↗
3. Evaluation on a water-based binder for the graphite anode of Li-ion batteries10.1016/j.jpowsour.2004.05.056 ↗
4. Cellulose as a binding material in graphitic anodes for Li ion batteries: a performance and degradation study10.1016/S0013-4686(02)00784-3 ↗
5. Effect of carboxymethyl cellulose on aqueous processing of natural graphite negative electrodes and their electrochemical performance for lithium batteries10.1149/1.1979214 ↗
6. Aqueous processing of natural graphite particulates for lithium-ion battery anodes and their electrochemical performance10.1016/j.jpowsour.2005.01.022 ↗
7. Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries10.1016/j.jpowsour.2006.03.073 ↗
8. Prospective materials and applications for Li secondary batteries10.1039/c0ee00831a ↗
9. Low cost, environmentally benign binders for lithium-ion batteries10.1149/1.3291976 ↗
10. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
11. Small things make a big difference: binder effects on the performance of Li and Na batteries10.1039/C4CP02475C ↗
12. A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes10.1016/j.electacta.2012.03.161 ↗
13. Influence of thermal treated carbon black conductive additive on the performance of high voltage spinel Cr-Doped LiNi0.5Mn1.5O4 composite cathode electrode10.1149/2.0401503jes ↗
14. Investigation of PF6(-) and TFSI(-) anion intercalation into graphitized carbon blacks and its influence on high voltage lithium ion batteries10.1039/C4CP04113E ↗
15. Understanding the influence of conductive carbon additives surface area on the rate performance of LiFePO4 cathodes for lithium ion batteries10.1016/j.carbon.2013.07.083 ↗
16. Prospects and limits of energy storage in batteries10.1021/jz5026273 ↗
17. On porous electrodes in electrolyte solutions10.1016/0013-4686(63)80042-0 ↗
18. Numerical modeling of electrochemical-mechanical interactions in lithium polymer batteries10.1016/j.compstruc.2009.08.005 ↗
19. Understanding the impedance spectrum of 18650 LiFePO4-cells10.1016/j.jpowsour.2012.12.020 ↗
20. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
21. Ionic conduction in lithium ion battery composite electrode governs cross-sectional reaction distribution10.1038/srep26382 ↗
22. Tortuosity determination of battery electrodes and separators by impedance spectroscopy10.1149/2.1141607jes ↗
23. The effect of local current density on electrode design for lithium-ion batteries10.1016/j.jpowsour.2011.12.063 ↗
24. Model prediction and experiments for the electrode design optimization of LiFePO4/graphite electrodes in high capacity lithium-ion batteries10.5012/bkcs.2013.34.1.79 ↗
25. Impact of the calendering process on the interfacial structure and the related electrochemical performance of secondary lithium-ion batteries10.1149/05026.0059ecst ↗
26. DEMS study of gas evolution at thick graphite electrodes for lithium-ion batteries: the effect of γ-butyrolactone10.1016/S0378-7753(01)00826-6 ↗
27. Lithium salt of carboxymethyl cellulose as an aqueous binder for thick graphite electrode in lithium ion batteries10.1007/s13233-015-3094-1 ↗
28. Impedance spectroscopy characterization of porous electrodes under different electrode thickness using a symmetric cell for high-performance lithium-ion batteries10.1021/jp512564f ↗
29. Multiscale design optimization of lithium ion batteries using adjoint sensitivity analysis10.1002/nme.4347 ↗
30. A design optimization methodology for Li+ batteries10.1016/j.jpowsour.2013.12.025 ↗
31. Stieß · 2009
32. Laser-printed thick-film electrodes for solid-state rechargeable Li-ion microbatteries10.1016/j.jpowsour.2006.11.053 ↗
33. Laser-printing and femtosecond-laser structuring of LiMn2O 4 composite cathodes for Li-ion microbatteries10.1016/j.jpowsour.2013.12.132 ↗
34. High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes10.1038/ncomms2747 ↗
35. Capillary forces in suspension rheology10.1126/science.1199243 ↗
36. A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties10.1016/j.jpowsour.2014.04.115 ↗
37. Ceramic capillary suspensions: novel processing route for macroporous ceramic materials10.1111/jace.12126 ↗
38. Micro structural investigations and mechanical properties of macro porous ceramic materials from capillary suspensions10.1111/jace.13184 ↗
39. Fabrication of highly porous glass filters using capillary suspension processing10.1016/j.seppur.2015.06.022 ↗
40. Highly porous materials with unique mechanical properties from smart capillary suspensions10.1002/adma.201504910 ↗
41. Determination of the absolute and relative extents of basal plane surface area and “non-basal plane surface” area of graphites and their impact on anode performance in lithium ion batteries10.1016/S0378-7753(01)00527-4 ↗
42. Development of carbon conductive additives for advanced lithium ion batteries10.1016/j.jpowsour.2010.07.002 ↗
43. Einflüsse der mechanischen Verfahrenstechnik auf die Herstellung von Elektroden für Lithium-Ionen-Batterien10.1002/cite.201400093 ↗
44. Capillary suspensions: particle networks formed through the capillary force10.1016/j.cocis.2014.10.004 ↗
45. Interaction between polymeric additives and secondary fluids in capillary suspensions10.1021/acs.langmuir.5b03861 ↗
46. Restructuring and aging in a capillary suspension10.1007/s00397-014-0805-z ↗
47. Materials and processing for lithium-ion batteries10.1007/s11837-008-0116-x ↗