journal article·2016-06

Temperature effects on Li 4 Ti 5 O 12 electrode/electrolyte interfaces at the first cycle: A X-ray Photoelectron Spectroscopy and Scanning Auger Microscopy study

J.-B. Gieu, C. Courrèges, L. El Ouatani, C. Tessier, H. Martinez

Publisher page

Abstract

Li4Ti5O12-based negative electrodes for Lithium-ion batteries are of interest because of the high reversibility of Li+ insertion/extraction. In this study, the surface of cycled electrodes is analysed by X-ray Photoelectron Spectroscopy (XPS) and Scanning Auger Microscopy (SAM) to investigate the effects of cycling temperature (room temperature, 60 °C and 85 °C) upon the solid electrolyte interphase (SEI) formation, which plays a major role in batteries electrochemical performances. Half-cells, with a vinylene carbonate containing electrolyte, are galvanostatically cycled at different steps of the first cycle: the mid-plateau during the first discharge, the end of the first discharge at 1.2 V and the end of the first charge at 2.0 V. XPS analysis evidences that higher temperatures promote the formation of a thicker SEI, which can explain the increase of the irreversible capacity with temperature. SAM mappings (allowing high spatial resolution ∼10–100 nm) evidence that this SEI homogeneously covers the electrode surface, regardless of the cycling temperature. During charge, the SEI is partially dissolved at room temperature, more slightly at 60 °C whereas at 85 °C, no clear evidence of layer thinning is observed. The SEI chemical composition is also investigated and reveals a majority of organic species and an increasing proportion of LiF with the temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. The li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
2. Safe and fast-charging li-ion battery with long shelf life for power applications10.1016/j.jpowsour.2010.11.093 ↗
3. Why transition metal (di)oxides are the most attractive materials for batteries10.1016/0167-2738(94)90410-3 ↗
4. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
5. Challenges for rechargeable li batteries10.1021/cm901452z ↗
6. Effect of vinylene carbonate additive in li-ion batteries: comparison of LiCoO2/c, LiFePO4/c, and LiCoO2/Li4Ti5O12 systems10.1149/1.3111891 ↗
7. Y.-B. He, B. Li, M. Liu, C. Zhang, W. Lv, C. Yang, J. Li, H. Du, B. Zhang, Q.-H. Yang, J.-K. Kim, F. Kang, Gassing in Li4Ti5O12-based Batteries and its Remedy, Scientific Reports 2.
8. Study of the interface between Li4Ti5O12 electrodes and standard electrolyte solutions in 0.0–5.0 v10.1149/1.2992706 ↗
9. Effect of solid electrolyte interface (sei) film on cyclic performance of Li4Ti5O12 anodes for li ion batteries10.1016/j.jpowsour.2013.03.141 ↗
10. Depth profiling the solid electrolyte interphase on lithium titanate (Li4Ti5O12) using synchrotron-based photoelectron spectroscopy10.1016/j.jpowsour.2015.06.038 ↗
11. Li-ion electrochemistry able to work in a large temperature range
12. Étude du vieillissement de batteries lithium-ion fonctionnant à haute température par spectroscopie photoélectronique à rayonnement x (xps)
13. On the performance of graphitized meso carbon microbeads (mcmb)–meso carbon fibers (mcf) and synthetic graphite electrodes at elevated temperatures10.1016/j.jpowsour.2007.06.187 ↗
14. Comparison of the reactions between Li7/3Ti5/3O4 or LiC6 and nonaqueous solvents or electrolytes using accelerating rate calorimetry10.1149/1.1817698 ↗
15. Comparisons of graphite and spinel Li1.33Ti1.67O4 as anode materials for rechargeable lithium-ion batteries10.1016/j.electacta.2005.01.034 ↗
16. Electrochemical kinetics and safety of 2-volt class li-ion battery system using lithium titanium oxide anode10.1149/1.3043441 ↗
17. Recent development and application of Li4Ti5O12 as anode material of lithium ion battery10.1016/j.jpcs.2010.05.001 ↗
18. High performance Li4Ti5O12 material as anode for lithium-ion batteries10.1016/j.electacta.2013.09.086 ↗
19. Recent advances of Li4Ti5O12 as a promising next generation anode material for high power lithium-ion batteries10.1039/C4TA06882C ↗
20. Advanced charge performance of pristine Li4Ti5O12 spinel for power lithium-ion battery10.1016/j.ceramint.2014.11.065 ↗
21. Gassing behavior of lithium titanate based lithium ion batteries with different types of electrolytes10.1016/j.jpowsour.2015.03.172 ↗
22. In situ gas analysis of Li4Ti5O12 based electrodes at elevated temperatures10.1149/2.0311506jes ↗
23. Performance degradation and gassing of Li4Ti5O12/LiMn2O4 lithium-ion cells10.1149/2.013208jes ↗
24. Tantalum-doped lithium titanate with enhanced performance for lithium-ion batteries10.1016/j.jpowsour.2015.02.154 ↗
25. Investigation on gas generation of Li4Ti5O12/LiNi1/3Co1/3Mn1/3O2 cells at elevated temperature10.1016/j.jpowsour.2013.03.057 ↗
26. Does Li4Ti5O12 need carbon in lithium ion batteries? carbon-free electrode with exceptionally high electrode capacity10.1039/C1CC16462G ↗
27. Is Li4Ti5O12 a solid-electrolyte-interphase-free electrode material in li-ion batteries? reactivity between the Li4Ti5O12 electrode and electrolyte10.1039/C3TA12728A ↗
28. Wendsjo, temperature dependence of the passivation layer on graphite10.1016/S0378-7753(99)00202-5 ↗
29. Charge-discharge stability of graphite anodes for lithium-ion batteries10.1016/S0022-0728(00)00447-2 ↗
30. Chemical composition and morphology of the elevated temperature sei on graphite10.1149/1.1397771 ↗
31. Lithium-ion batteries working at 85°c: aging phenomena and electrode/electrolyte interfaces studied by xps10.1149/2.061210jes ↗
32. Lithium secondary batteries working at very high temperature: capacity fade and understanding of aging mechanisms10.1016/j.jpowsour.2013.02.067 ↗
33. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries10.1016/S0013-4686(01)00858-1 ↗
34. The effect of vinylene carbonate additive on surface film formation on both electrodes in Li-Ion batteries10.1149/1.3029674 ↗
35. Studies of the effect of varying vinylene carbonate (VC) content in lithium ion cells on cycling performance and cell impedance10.1149/2.031310jes ↗
36. In-operando evaluation of the effect of vinylene carbonate on the insulating character of the solid electrolyte interphase10.1016/j.elecom.2015.05.013 ↗
37. Core and valence spectra of titanium dichalcogenides TiX2 (where x is o,s). Experimental and theoretical studies10.1016/0368-2048(94)02285-2 ↗
38. Electrode/electrolyte interface reactivity in high-voltage spinel LiMn1.6Ni0.4O4/Li4Ti5O12 lithium-ion battery10.1021/jp1026509 ↗
39. Compréhension des mécanismes aux interfaces électrode/électrolyte dans des accumulateurs lithium-ion