journal article·2012-10

Enhanced rate and high-temperature performance of La0.7Sr0.3MnO3-coated LiNi0.5Mn1.5O4 cathode materials for lithium ion battery

Guiying Zhao, Yingbin Lin, Ting Zhou, Ying Lin, Yandan Huang, Zhigao Huang

Publisher page

Abstract

Abstract La 0.7 Sr 0.3 MnO 3 -coated 5 V spinel LiNi 0.5 Mn 1.5 O 4 as cathode is prepared by mixing LiNi 0.5 Mn 1.5 O 4 powders and the sol–gel-drived La 0.7 Sr 0.3 MnO 3 matrix, followed by high-temperature calcinations. The effect of La 0.7 Sr 0.3 MnO 3 -coating on the electrochemical performances of LiNi 0.5 Mn 1.5 O 4 cells, especially at elevated temperature, is investigated systematically by the charge/discharge testing, cyclic voltammograms and AC impedance spectroscopy, respectively. Compared to pristine LiNi 0.5 Mn 1.5 O 4 , La 0.7 Sr 0.3 MnO 3 -coated material has much lower surface and charge-transfer resistances and shows a higher lithium diffusion rate. The results of electrochemical experiments demonstrate that the modified material exhibits remarkably enhanced electrochemical reversibility and stability at elevated temperature. The La 0.7 Sr 0.3 MnO 3 -coating layer protected the surface of the active materials from HF in the electrolyte during electrochemical cycling. As a result, the electrochemical cycling stability is improved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Santhanam · J. Power Sources · 2010 · 195 · 544210.1016/j.jpowsour.2010.03.067 ↗
2. Patoux · J. Power Sources · 2009 · 189 · 34410.1016/j.jpowsour.2008.08.043 ↗
3. Kunduraci · Chem. Mater. · 2006 · 18 · 358510.1021/cm060729s ↗
4. Sun · Electrochim. Acta · 2003 · 48 · 50310.1016/S0013-4686(02)00717-X ↗
5. Arrebola · J. Power Sources · 2010 · 195 · 427810.1016/j.jpowsour.2010.01.004 ↗
6. Fan · Electrochim. Acta · 2007 · 52 · 387010.1016/j.electacta.2006.10.063 ↗
7. Shi · J. Power Sources · 2010 · 195 · 686010.1016/j.jpowsour.2010.02.063 ↗
8. Wu · J. Power Sources · 2010 · 195 · 290910.1016/j.jpowsour.2009.11.029 ↗
9. Kang · J. Power Sources · 2010 · 195 · 202310.1016/j.jpowsour.2009.10.068 ↗
10. Guo · Mater. Lett. · 2006 · 60 · 26110.1016/j.matlet.2005.08.027 ↗
11. Yang · Electrochim. Acta · 2011 · 56 · 405810.1016/j.electacta.2010.12.109 ↗
12. Li · Electrochim. Acta · 2006 · 51 · 387210.1016/j.electacta.2005.11.015 ↗
13. Cui · Electrochim. Acta · 2010 · 55 · 92210.1016/j.electacta.2009.08.020 ↗
14. Lin · Appl. Phys. A · 2011 · 104 · 14310.1007/s00339-010-6082-5 ↗
15. Fergus · J. Power Sources · 2010 · 195 · 93910.1016/j.jpowsour.2009.08.089 ↗
16. Aurbach · J. Power Sources · 2006 · 162 · 78010.1016/j.jpowsour.2005.07.009 ↗
17. Aurbach · Electrochem. Acta · 2001 · 46 · 239510.1016/S0013-4686(01)00428-5 ↗
18. Xu · Chem. Rev. · 2004 · 104 · 430310.1021/cr030203g ↗
19. Hwanga · J. Power Sources · 2009 · 193 · 82810.1016/j.jpowsour.2009.04.012 ↗
20. Markovsky · Electrochem. Commun. · 2004 · 6 · 82110.1016/j.elecom.2004.06.005 ↗
21. Huang · Phys. Rev. B · 2004 · 69 · 09442010.1103/PhysRevB.69.094420 ↗