journal article·2011-10

Modeling and control of a portable proton exchange membrane fuel cell–battery power system

Yan Zhang, Biao Zhou

Journal of Power Sources· Volume 196· Issue 20
Publisher page

Abstract

Abstract A portable proton exchange membrane (PEM) fuel cell–battery power system that uses hydrogen as fuel has a higher power density than conventional batteries, and it is one of the most promising environmentally friendly small-scale alternative energy sources. A general methodology of modeling, control and building of a proton exchange membrane fuel cell–battery system is introduced in this study. A set of fuel cell–battery power system models have been developed and implemented in the Simulink environment. This model is able to address the dynamic behaviors of a PEM fuel cell stack, a boost DC/DC converter and a lithium-ion battery. To control the power system and thus achieve proper performance, a set of system controllers, including a PEM fuel cell reactant supply controller and a power management controller, were developed based on the system model. A physical 100 W PEM fuel cell–battery power system with an embedded micro controller was built to validate the simulation results and to demonstrate this new environmentally friendly power source. Experimental results demonstrated that the 100 W PEM fuel cell–battery power system operated automatically with the varying load conditions as a stable power supply. The experimental results followed the basic trend of the simulation results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. O’Hayre · 2006
2. Larmini · 2002
3. U.S. Department of Energy · 2000
4. Lee · Journal of Power Sources · 1998 · 73 · 22910.1016/S0378-7753(97)02812-7 ↗
5. Akella · 2001
6. Amphlett · Journal of Power Sources · 1994 · 49 · 34910.1016/0378-7753(93)01835-6 ↗
7. Boettner · 2001
8. Kim · Journal of the Electrochemical Society · 1995 · 142 · 267010.1149/1.2050072 ↗
9. M. Ogburn, D.J. Nelson, K. Wipke, T. Markel. Modeling and validation of a fuel cell hybrid vehicle. SAE Paper 2000-01-1566.10.4271/2000-01-1566 ↗
10. Andrew · Journal of Power Sources · 2001 · 102 · 8210.1016/S0378-7753(01)00798-4 ↗
11. Ge · Journal of Power Sources · 2003 · 124 · 110.1016/S0378-7753(03)00584-6 ↗
12. Yu · Journal of Power Sources · 2005 · 147 · 18410.1016/j.jpowsour.2005.01.030 ↗
13. Pukrushpan · 2004
14. Benini · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · 2000 · 8 · 29910.1109/92.845896 ↗
15. Benini · 1998
16. Burd · IEEE Journal of Solid-State Circuits · 2000 · 35 · 157110.1109/4.881202 ↗
17. Chandrasena · 2000 · 525
18. Cho · 2006
19. Choi · 2004
20. Chung · 1999 · 274
21. Gao · IEEE Transactions on Aerospace and Electronic Systems · 2005 · 41 · 346
22. Gao · IEEE Transactions on Vehicular Technology · 2005 · 54 · 84610.1109/TVT.2005.847229 ↗
23. Gervasio · Journal of Power Sources · 2005 · 149 · 1510.1016/j.jpowsour.2005.01.054 ↗
24. Gielniak · 2004 · 4422
25. AMETEK 3.0 BLDC 12 VDC Low-voltage Blower Data Sheet. Available from: www.ametek.com.
26. Y. Cao, A Simulink Model Configurable to Buck, Boost and Buck–Boost DC–DC Converters with PWM PI Control, 2008. Available from: www.matlab.com.
27. Tremblay · 2007 · 284
28. Zhang · 2010 · 59
29. Kato · Journal of Power Sources · 2003 · 117 · 11810.1016/S0378-7753(03)00157-5 ↗