journal article·2001-12

Charge–discharge behaviour of VRLA batteries: model calibration and application for state estimation and failure detection

A. Tenno, R. Tenno, T. Suntio

Journal of Power Sources· Volume 103· Issue 1
Publisher page

Abstract

Abstract The dynamic behaviour of batteries can be predicted using theoretical cell model for basic processes. In this paper, this model is calibrated for two types of valve regulated lead acid (VRLA) batteries, and is applied for viewing unobservable processes in battery by observable processes. It is shown that unobservable parameters like overpotential, reaction rate, porosity, acid concentration, and other parameters of electrode can be evaluated by total current, terminal voltage and temperature of surrounding atmosphere of battery. The calibrated model is applied to distinguish between outwardly equal batteries with different backup time and cut-off time. It is shown that difference in morphology of electrodes, thickness of electrodes and quantity of electrolyte in separator are the main distinguishing parameters between batteries. These parameters can be tested online by current–voltage measurements using fast calculation method proposed in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Fuel Cells and Related Materials · Thermodynamic properties of mixtures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A review of impedance measurements for determination of the state-of-charge or state-of-health of secondary batteries10.1016/S0378-7753(97)02665-7 ↗
2. J. Newman, W.H. Tiedemann, AIChE J. Control Optim. 21 (25) (1975).10.1002/aic.690210103 ↗
3. W.H. Tiedemann, J. Newman, in: S. Gross (Ed.), Battery Design and Optimisation, The Electrochemical Society Softbound Proceeding Series, Princeton, New York, 1979, 23 pp.
4. A mathematical model of a lead acid cell: discharge, rest and charge10.1149/1.2100322 ↗
5. The effects of separator design on the discharge performance of a starved lead acid cell10.1149/1.2086148 ↗
6. A two-dimensional mathematical model of a porous lead dioxide electrode in a lead acid cell10.1149/1.2095601 ↗
7. Two-dimensional mathematical model of a lead acid cell10.1149/1.2220804 ↗
8. Numerical modelling of coupled electrochemical and transport processes in lead acid cell10.1149/1.1837741 ↗
9. Kinetics of the porous lead electrode in the lead acid cell10.1149/1.2096070 ↗
10. The discharge behaviour of the porous lead electrode in lead acid battery. I. Experimental investigation10.1007/BF01062289 ↗
11. Mathematical modelling of a lead acid cell with immobilised electrolyte10.1016/0378-7753(95)02196-N ↗
12. D. Berndt, R. Bräutigam, U. Teutsch, Temperature compensation of float voltage, the special situation of VRLA batteries, in: Proceedings of the 7th International Telecommunications Energy Conference, The Netherlands, 1995, pp. 1–12.10.1109/INTLEC.1995.498922 ↗
13. D. Berndt, Maintenance-Free Batteries, Research Studies Press Ltd./Wiley, New York, 496 pp.
14. A mathematical model of the oxygen-recombination lead acid cell10.1149/1.2050066 ↗
15. A two-dimensional transient thermal model for valve regulated lead acid batteries under overcharge10.1149/1.1837742 ↗
16. Simulation of recombination lead acid batteries10.1149/1.1837963 ↗
17. The discharge behaviour of the porous lead electrode in lead acid battery. II. Mathematical model10.1007/BF01062290 ↗
18. S. Pissanetzky, Sparse Matrix Technology, Academic Press, New York, 1984.10.1016/B978-0-12-557580-5.50012-0 ↗
19. Effect of gelling on the open circuit potential against time transients of Pb/PbSO4 electrodes at various state of charge10.1007/BF00243328 ↗