Performance analysis of proton exchange membrane fuel cell in automotive applications
Source abstract
Abstract
Abstract This paper deals with the performance analysis of a proton exchange membrane fuel cell in automotive applications and especially for start/stop phases. Start-Stop cycles are one of the main sources of degradation for fuel cell systems, embedded in the automotive applications, among other dynamic conditions as idling, load cycling or high power. In this study, polarization curves and electrochemical impedance spectra are used to analyze the degradation mechanisms inside fuel cell stack during start/stop cycling. Obviously, the carbon support of the catalyst layer is the main constituent that suffers performance degradation during the 2,600 successive cycles performed. The impedance measurement of a 5 kW PEM fuel cell stack revealed that the ohmic resistance does not vary whereas the charger transfer and mass transfer resistances increase drastically depending on the number of cycle repetitions. The oxygen reduction reaction impact due to the fuel/air interface is also visible even if the reactants are consumed with a dummy load for the shutdowns.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Emission factor development for light-duty vehicles based on real-world emissions using emission map-based simulation10.1016/j.envpol.2020.116081 ↗
2. Estimating the effectiveness of vehicle emission regulations for reducing NOx from light-duty vehicles in Korea using on-road measurements
3. Performance and regulated gaseous emissions of a Euro 6 diesel vehicle with Lean NOx Trap at different ambient conditions: sensitivity to the type of fuel
4. Impact of regulated pollutant emissions of Euro 6d-Temp light-duty diesel vehicles under real driving conditions10.1016/j.jclepro.2020.124927 ↗
5. Commission · 2020
6. 2020
7. Statistically supported real driving emission calibration: using cycle generation to provide vehicle-specific and statistically representative test scenarios for Euro 710.1177/1468087420935221 ↗
8. System based on thermal control of the HCCI technology developed for reduction of the vehicle NOX emissions in order to fulfil the future standard Euro 710.1016/j.scitotenv.2018.06.082 ↗
9. The effect of driving cycles and H2 production pathways on the lifecycle analysis of hydrogen fuel cell vehicle: a case study in South Korea10.1016/j.ijhydene.2020.09.024 ↗
10. Energy management of heavy-duty fuel cell vehicles in real-world driving scenarios: robust design of strategies to maximize the hydrogen economy and system lifetime10.1016/j.enconman.2020.113795 ↗
11. “ScienceDirect Deployment of fuel cell vehicles in China : greenhouse gas emission reductions from converting the heavy-duty truck fleet from diesel and natural gas to hydrogen
12. An insight into potential early adopters of hydrogen fuel-cell vehicles in Japan10.1016/j.ijhydene.2020.12.173 ↗
13. Fuel cell electric vehicles and hydrogen balancing 100 percent renewable and integrated national transportation and energy systems
14. Challenges in the designing, planning and deployment of hydrogen refueling infrastructure for fuel cell electric vehicles10.1016/j.etran.2020.100086 ↗
15. How drivers decide whether to get a fuel cell vehicle: an ethnographic decision model10.1016/j.ijhydene.2020.12.042 ↗
16. Hydrogen and Fuel Cell Technologies Office, “DOE Technical Targets for Fuel Cell Systems and Stacks for Transportation Applications.” [Online]. Available: https://www.energy.gov/eere/fuelcells/doe-technical-targets-fuel-cell-systems-and-stacks-transportation-applications.
17. A quick evaluating method for automotive fuel cell lifetime10.1016/j.ijhydene.2008.04.048 ↗
18. “Synthesis of degradation mechanisms and of their impacts on degradation rates on proton-exchange membrane fuel cells and lithium-ion nickel–manganese–cobalt batteries in hybrid transport applications10.1016/j.ress.2020.107369 ↗
19. Comparing shut-down strategies for proton exchange membrane fuel cells10.1016/j.jpowsour.2013.12.058 ↗
20. Stack shut-down strategy optimisation of proton exchange membrane fuel cell with the segment stack technology10.1016/j.ijhydene.2019.10.218 ↗
21. Impact of dummy load shut-down strategy on performance and durability of proton exchange membrane fuel cell stack10.1016/j.jpowsour.2018.10.003 ↗
22. Study of the two-phase dummy load shut-down strategy for proton exchange membrane fuel cells10.1016/j.jpowsour.2016.11.098 ↗
23. Optimizing Proton Exchange Membrane Fuel Cell Manufacturing Process to Reduce Break-In Time
24. Impact of the temperature on calendar aging of an open cathode fuel cell stack10.1016/j.jpowsour.2020.229436 ↗
25. “Investigation on ‘saw-tooth’ behavior of PEM fuel cell performance during shutdown and restart cycles10.1016/j.jpowsour.2006.04.137 ↗
26. Initial conditioning of a polymer electrolyte fuel cells: the relationship between microstructure development and cell performance, investigated by small-angle neutron scattering10.1016/j.rinp.2019.01.066 ↗
27. Influence of the porous transport layer properties on the mass and charge transfer in a segmented PEM electrolyzer10.1016/j.ijhydene.2020.01.100 ↗
28. Investigating the effect of start-up and shut-down cycles on the performance of the proton exchange membrane fuel cell by segmented cell technology10.1016/j.ijhydene.2015.09.042 ↗
29. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
30. PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode,10.1016/j.jpowsour.2005.10.059 ↗
31. Mechanisms of reverse current and mitigation strategies in proton exchange membrane fuel cells during startups10.1016/j.ijhydene.2016.03.037 ↗
32. Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): a review10.1016/j.jpowsour.2020.229434 ↗
33. Use of mechanistic carbon corrosion model to predict performance loss in Polymer Electrolyte Membrane fuel cells10.1016/j.jpowsour.2014.05.041 ↗
34. 2017