journal article·2021-09

Effect of catalyst layer microstructures on performance and stability for high temperature polymer electrolyte membrane fuel cells

Jujia Zhang, Haining Wang, Wen Li, Jin Zhang, Di Lu, Wenrui Yan, Yan Xiang, Shanfu Lu

Publisher page

Abstract

Abstract The microstructures of catalyst layers (CLs) provide the paths for phosphoric acid (PA) invasion and decide the amount and distribution of PA in CLs, which is essential to improve the performance and stability of high temperature polymer electrolyte membrane fuel cells (HT-PEMFCs). In this work, the CLs with different microstructures are constructed and the effects of Pt loading on the performance and degradation of HT-PEMFCs are studied. The results show the CLs with flat surface slow down the process of PA invasion and well-developed pore structures promote the redistribution of PA, which results in low mass transfer resistance. Therefore, the peak power density of HT-PEMFC based on CLs prepared by ultrasonic-spraying is 1.4 times than that by screen-printing, while the performance degradation is only 11% after accelerated stress test of 30,000 cycles with the Pt loading of 0.5 mg cm−2. Distribution of relaxation times analysis is used to assist the electrochemical impedance spectroscopy to further distinguish the different physicochemical process within cells. The result reveals that mass transfer is affected greatly by the effects of microstructures and Pt loadings, and gets deterioration gradually with the invasion of PA into CLs, which not only makes Pt particle growth but decreases kinetics of oxygen reduction reaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells10.1016/j.progpolymsci.2008.12.003 ↗
2. Predictive system-level modeling framework for transient operation and cathode platinum degradation of high temperature proton exchange membrane fuel cells10.1016/j.apenergy.2020.114547 ↗
3. Single cell induced starvation in a high temperature proton exchange membrane fuel cell stack10.1016/j.apenergy.2019.05.061 ↗
4. A self-anchored phosphotungstic acid hybrid proton exchange membrane achieved via one-step synthesis10.1002/aenm.201400842 ↗
5. Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cell10.1016/j.jpowsour.2009.04.021 ↗
6. Fault detection and isolation of high temperature proton exchange membrane fuel cell stack under the influence of degradation10.1016/j.jpowsour.2017.05.021 ↗
7. High temperature PEM fuel cell performance characterisation with CO and CO2 using electrochemical impedance spectroscopy10.1016/j.ijhydene.2011.04.076 ↗
8. Simultaneously enhancing ionic conduction and mechanical strength of poly(ether sulfones)-poly(vinyl pyrrolidone) membrane by introducing graphitic carbon nitride nanosheets for high temperature proton exchange membrane fuel cell application10.1016/j.memsci.2018.04.039 ↗
9. New anhydrous proton exchange membranes for high-temperature fuel cells based on PVDF–PVP blended polymers10.1039/C4TA04952G ↗
10. Performance assessment of a combined system consisting of a high-temperature polymer electrolyte membrane fuel cell and a thermoelectric generator10.1016/j.energy.2019.05.030 ↗
11. Durable Pt electrocatalyst supported on a 3D nanoporous carbon shows high performance in a high-temperature polymer electrolyte fuel cell10.1021/acsami.5b01724 ↗
12. High-stability electrodes for high-temperature proton exchange membrane fuel cells by using advanced nanocarbonaceous materials10.1002/celc.201700699 ↗
13. Probing phosphoric acid redistribution and anion migration in polybenzimidazole membranes10.1016/j.elecom.2017.07.005 ↗
14. Phosphoric acid invasion in high temperature PEM fuel cell gas diffusion layers10.1016/j.electacta.2017.10.054 ↗
15. Phosphoric acid distribution and its impact on the performance of polybenzimidazole membranes10.1016/j.jpowsour.2014.06.171 ↗
16. Phosphoric acid distribution in the membrane electrode assembly of high temperature proton exchange membrane fuel cells10.1016/j.electacta.2009.06.031 ↗
17. A novel dual catalyst layer structured gas diffusion electrode for enhanced performance of high temperature proton exchange membrane fuel cell10.1016/j.jpowsour.2013.07.062 ↗
18. Wetting properties of porous high temperature polymer electrolyte fuel cells materials with phosphoric acid10.1039/C9CP02149C ↗
19. The impact of the catalyst layer structure on phosphoric acid migration in HT-PEFC – an operando X-ray tomographic microscopy study10.1016/j.jelechem.2020.113832 ↗
20. Morphology studies on high-temperature polymer electrolyte membrane fuel cell electrodes10.1016/j.jpowsour.2014.01.032 ↗
21. Effects of cathode catalyst layer fabrication parameters on the performance of high-temperature polymer electrolyte membrane fuel cells10.1016/j.apsusc.2020.145461 ↗
22. High-performance membrane-electrode assembly with an optimal polytetrafluoroethylene content for high-temperature polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2016.05.042 ↗
23. Achieving high Pt utilization and superior performance of high temperature polymer electrolyte membrane fuel cell by employing low-Pt-content catalyst and microporous layer free electrode design10.1016/j.jpowsour.2019.04.045 ↗
24. Enhancing cell performance and durability of high temperature polymer electrolyte membrane fuel cells by inhibiting the formation of cracks in catalyst layers10.1149/1945-7111/ab9fe0 ↗
25. A novel phosphoric acid doped poly(ethersulphone)-poly(vinyl pyrrolidone) blend membrane for high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2015.04.028 ↗
26. Acid distribution and durability of HT-PEM fuel cells with different electrode supports10.1002/fuce.201700181 ↗
27. Breaking through the cracks: on the mechanism of phosphoric acid migration in high temperature polymer electrolyte fuel cells10.1149/2.0501814jes ↗
28. Distribution of relaxation times analysis of high-temperature PEM fuel cell impedance spectra10.1016/j.electacta.2017.02.011 ↗
29. Analysis of the regeneration behavior of high temperature polymer electrolyte membrane fuel cells after hydrogen starvation10.1016/j.jpowsour.2019.227562 ↗
30. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
31. Determination of anion transference number and phosphoric acid diffusion coefficient in high temperature polymer electrolyte membranes10.1149/2.1201810jes ↗
32. Investigation of charge-transfer and mass-transport resistances in PEMFCs with microporous layer using electrochemical impedance spectroscopy10.1149/1.3033408 ↗
33. Phosphoric acid dynamics in high temperature polymer electrolyte membranes10.1149/1945-7111/abb70c ↗