journal article·2021-05

Fabricating over 7%-efficient Sb2(S,Se)3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source

Xiaobo Hu, Jiahua Tao, Rui Wang, Youyang Wang, Yanlin Pan, Guoen Weng, Xianjia Luo, Shaoqiang Chen, Ziqiang Zhu, Junhao Chu, Hidefumi Akiyama

Publisher page

Abstract

Abstract In this study, Sb2(S,Se)3 thin films are fabricated using the vapor transport deposition (VTD) method, with Sb2Se3 and Sb2S3 mixed powders as the evaporation source. The performance of the corresponding glass/ITO/CdS/Sb2(S,Se)3/Au solar cells are found to be correlated to the mass ratio between Sb2S3 and the overall powder mixture. The properties of the Sb2(S,Se)3 thin films and cell devices adopting four different Sb2S3 mass ratios (x = 0.1, 0.25, 0.5 and 0.75) are compared. Further, the electrical properties – from dark and light J-V measurements; structural properties – from X-ray diffraction and scanning electron microscope measurements; and carrier-recombination rates at the buffer/absorber interface in the space-charge region (SCR) and in the quasi-neutral region – from temperature-illumination-dependent open-circuit voltage (VOC) measurements – are compared. It is found that a Sb2(S,Se)3 solar cell with a Sb2S3 mass ratio of 0.25 had optimal crystallinity, the lowest density of deep traps and the smallest carrier-recombination rates at the interface, leading to a high efficiency of 7.31%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Emerging inorganic compound thin film photovoltaic materials: progress, challenges and strategies10.1016/j.mattod.2020.09.002 ↗
2. Solar cell efficiency tables (Version 55)10.1002/pip.3228 ↗
3. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
4. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
5. An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells10.1016/j.cej.2020.124599 ↗
6. Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells10.1016/j.nanoen.2019.04.019 ↗
7. Efficiency enhancement of Sb2Se3 thin-film solar cells by the co-evaporation of Se and Sb2Se310.7567/APEX.9.052302 ↗
9. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
10. Improving the efficiency of Sb2Se3 thin-film solar cells by post annealing treatment in vacuum condition10.1016/j.solmat.2018.08.006 ↗
11. CdS/Sb2S3 heterojunction thin film solar cells with a thermally evaporated absorber10.1039/C7TC02460F ↗
12. 5.91%-efficient Sb2Se3 solar cell with RF magnetron sputtered CdS buffer layer10.1016/j.apmt.2019.06.001 ↗
13. Quasiepitaxy strategy for efficient full-inorganic Sb2S3 solar cells10.1002/adfm.201901720 ↗
14. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth10.1016/j.solmat.2016.07.050 ↗
15. Thermal evaporation and characterization of superstrate CdS/Sb2Se3 solar cells10.1063/1.4874878 ↗
16. Selenization of Sb2Se3 absorber layer: an efficient step to improve device performance of CdS/Sb2Se3 solar cells10.1063/1.4894170 ↗
17. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
18. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
19. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
20. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
21. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
22. Alkali metals doping for high-performance planar heterojunction Sb2S3 solar cells10.1002/solr.201800272 ↗
23. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
24. Optimum chemical composition of antimony sulfide selenide for thin film solar cells10.1016/j.apsusc.2018.05.076 ↗
25. Over 6% certified Sb2(S,Se)3 solar cells fabricated via in situ hydrothermal growth and postselenization10.1002/aelm.201800683 ↗
26. Sb2(Se1-xSx)3 thin-film solar cells fabricated by single-source vapor transport deposition10.1002/solr.201800280 ↗
27. Over 7% efficiency of Sb2(S,Se)3 solar cells via V-shaped bandgap engineering10.1002/solr.202000220 ↗
28. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
29. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
30. Bandgap of thin film solar cell absorbers: a comparison of various determination methods10.1016/j.tsf.2018.11.017 ↗
31. Identifying parasitic current pathways in CIGS solar cells by modelling dark J–V response10.1002/pip.2582 ↗
32. Current transport in copper indium gallium diselenide solar cells comparing mesa diodes to the full cell10.1016/S0927-0248(02)00349-5 ↗
33. Space-charge-limited current effects in p-type CuIn0.8Ga0.2Se2/in Schottky diodes10.1002/(SICI)1521-4079(1998)33:2<285::AID-CRAT285>3.0.CO;2-S ↗
34. A recombination analysis of Cu(In,Ga)Se2 solar cells with low and high Ga compositions10.1016/j.solmat.2014.01.047 ↗
35. Determining interface properties limiting open-circuit voltage in heterojunction solar cells10.1063/1.4982752 ↗
36. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371904 ↗
37. Wide bandgap Cu(In,Ga)Se2 solar cells with improved energy conversion efficiency10.1002/pip.2244 ↗