journal article·2021-04Open access

One step electrochemical exfoliation of natural graphite flakes into graphene oxide for polybenzimidazole composite membranes giving enhanced performance in high temperature fuel cells

Jianuo Chen, Maria Perez-Page, Zhaoqi Ji, Zhe Zhang, Zunmin Guo, Stuart Holmes

Abstract

In this work, a 3D-printed reactor was designed to enable natural graphite flakes to be used for electrochemical exfoliation to quickly obtain graphene oxide. Graphite foil as a typical raw material of electrochemical exfoliation was also exfoliated for comparison. Under the same conditions (10V, 1mol/L ammonium sulfate solution as electrolyte), the graphene products obtained by one-step electrochemical exfoliation using natural graphite flakes based on the reactor, have a significantly higher degree of oxidation than products obtained using graphite foil (the oxygen content is increased by 50.2%). In addition, the oxidation degree can be further increased by increasing the electrolyte concentration or reaction time. This design achieves one-step exfoliation using natural graphite flakes to obtain graphene oxide with tunable oxygen content in short time without using any strong oxidants or strong acids. The as-prepared electrochemically exfoliated graphene oxide (EGO) was used to prepare polybenzimidazole (PBI)/ graphene oxide (GO) composite membranes for high-temperature polymer electrolyte membrane fuel cells (HTPEMFC). The 0.5%, 1% and 2% EGO loadings in the PBI membrane increased the peak power density by 13.8%, 24.4 % and 29.2 %, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Graphene research and applications · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. Dispersion behaviour of graphene oxide and reduced graphene oxide10.1016/j.jcis.2014.05.033 ↗
2. RS Ruoff the chemistry of graphene oxide10.1039/B917103G ↗
3. Eigler · 2014 · 7720
4. Graphene chemistry: synthesis and manipulation10.1021/jz201000a ↗
5. Spray-painted graphene oxide membrane fuel cells10.1016/j.memsci.2017.07.012 ↗
6. Electrocatalytic layers modified by reduced graphene oxide for PEM fuel cells10.1016/j.ijhydene.2015.05.093 ↗
7. Interfacial shear strength of reduced graphene oxide polymer composites10.1016/j.carbon.2014.05.042 ↗
8. Electrical conductivity of thermally reduced graphene oxide/polymer composites with a segregated structure10.1016/j.carbon.2013.08.016 ↗
9. Fabric-infused array of reduced graphene oxide sensors for mapping of skin temperatures10.1016/j.sna.2018.06.043 ↗
10. Modified graphene oxide sensors for ultra-sensitive detection of nitrate ions in water10.1016/j.talanta.2015.05.073 ↗
11. Graphene oxide: a promising membrane material for fuel cells10.1016/j.rser.2017.09.081 ↗
12. Functionalized graphene oxide nanocomposite membrane for low humidity and high temperature proton exchange membrane fuel cells10.1021/jp204610j ↗
13. 2016
14. Exfoliated graphene reinforced polybenzimidazole nanocomposite with improved electrical, mechanical and thermal properties10.1016/j.matchemphys.2018.11.026 ↗
15. Highly durable polybenzimidazole composite membranes with phosphonated graphene oxide for high temperature polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2018.11.057 ↗
16. Durability studies of PBI‐based high temperature PEMFCs10.1002/fuce.200800024 ↗
17. Oxidative degradation of polybenzimidazole membranes as electrolytes for high temperature proton exchange membrane fuel cells10.1002/fuce.201000146 ↗
18. High molecular weight polybenzimidazole membranes for high temperature PEMFC10.1002/fuce.201300070 ↗
19. Toward a new type of anhydrous organic proton conductor based on immobilized imidazole10.1021/cm021298q ↗
20. Graphite oxide/functionalized graphene oxide and polybenzimidazole composite membranes for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2014.03.061 ↗
21. A polybenzimidazole/sulfonated graphite oxide composite membrane for high temperature polymer electrolyte membrane fuel cells10.1039/c1jm11159k ↗
22. Development of high-temperature PEMFC based on heteropolyacids and polybenzimidazole10.1007/s10008-008-0678-0 ↗
23. Novel composite membranes of triazole modified graphene oxide and polybenzimidazole for high temperature polymer electrolyte membrane fuel cell applications10.1039/C5RA16554G ↗
24. Polybenzimidazole composite membranes containing imidazole functionalized graphene oxide showing high proton conductivity and improved physicochemical properties
25. Phosphonated polyimides: enhancement of proton conductivity at high temperatures and low humidity10.1016/j.memsci.2016.06.009 ↗
26. Highly phosphonated polypentafluorostyrene: characterization and blends with polybenzimidazole10.1016/j.eurpolymj.2013.09.002 ↗
27. Verfahren zur Darstellung der Graphitsäure10.1002/cber.18980310237 ↗
28. Synthesis of graphene oxide using modified hummers method: solvent influence10.1016/j.proeng.2017.04.118 ↗
29. Wet chemical synthesis of graphene10.1002/adma.201300155 ↗
30. Exfoliation of graphite into graphene in aqueous solutions of inorganic salts10.1021/ja5017156 ↗
31. Single stage electrochemical exfoliation method for the production of few-layer graphene via intercalation of tetraalkylammonium cations10.1016/j.carbon.2013.09.009 ↗
32. High-quality thin graphene films from fast electrochemical exfoliation10.1021/nn200025p ↗
33. One-step fast electrochemical fabrication of water-dispersible graphene10.1016/j.carbon.2016.10.044 ↗
34. Electrochemical exfoliation of graphite to produce graphene using tetrasodium pyrophosphate10.1039/C5RA01304F ↗
35. High-yield electro-oxidative preparation of graphene oxide10.1039/C4CC03260H ↗
36. Synthesis of graphite oxide by electrochemical oxidation in aqueous perchloric acid10.1016/j.carbon.2016.01.044 ↗
37. Two-step electrochemical intercalation and oxidation of graphite for the mass production of graphene oxide10.1021/jacs.7b08515 ↗
38. Synthesis of a high-temperature stable electrochemically exfoliated graphene10.1016/j.carbon.2019.10.042 ↗
39. Graphite and carbon powders for electrochemical applications10.1016/j.jpowsour.2006.02.064 ↗
40. Electrochemically exfoliated graphene and graphene oxide for energy storage and electrochemistry applications10.1002/chem.201503110 ↗
41. Improved synthesis of graphene flakes from the multiple electrochemical exfoliation of graphite rod10.1016/j.nanoen.2012.11.003 ↗
42. Facile electrochemical approach for the production of graphite oxide with tunable chemistry10.1016/j.carbon.2016.10.098 ↗
43. Preparation and characterization of expanded graphite polymer composite films for thermoelectric applications10.1002/pssb.201300078 ↗
44. Thermal conductivity and mechanical properties of expanded graphite10.1134/S0020168509050057 ↗
45. Tensile and compressive properties of flexible graphite foils10.1016/0008-6223(86)90232-0 ↗
46. Scalable production of graphene oxide using a 3D-printed packed-bed electrochemical reactor with a boron-doped diamond electrode10.1021/acsanm.8b02126 ↗
47. Mechanically-assisted electrochemical production of graphene oxide10.1021/acs.chemmater.6b04415 ↗
48. Impact of accelerated stress tests on high temperature PEMFC degradation10.1002/fuce.201500160 ↗
49. High quality, low oxygen content and biocompatible graphene nanosheets obtained by anodic exfoliation of different graphite types10.1016/j.carbon.2015.07.053 ↗
50. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
51. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
52. The chemistry of graphene oxide10.1039/B917103G ↗
53. Investigating the influence of surfactants on the stabilization of aqueous reduced graphene oxide dispersions and the characteristics of their composite films10.1016/j.carbon.2011.10.039 ↗
54. Disorder induced localized states in graphene
55. Tunable electrical conductivity of individual graphene oxide sheets reduced at "low" temperatures10.1021/nl8019938 ↗
56. Single sheet functionalized graphene by oxidation and thermal expansion of graphite10.1021/cm0630800 ↗
57. Polyaniline/graphene/carbon fiber ternary composites as supercapacitor electrodes10.1016/j.matlet.2014.10.162 ↗
58. Synthesis of amphiphilic graphene nanoplatelets10.1002/smll.200800988 ↗
59. Fourier transform infrared spectrometry
60. Modeling nanostructure in graphene oxide: inhomogeneity and the percolation threshold10.1021/acs.jcim.9b00114 ↗
61. Ultrafast delamination of graphite into high‐quality graphene using alternating currents10.1002/anie.201702076 ↗
62. Exploration of the active center structure of nitrogen-doped graphene-based catalysts for oxygen reduction reaction10.1039/c2ee21802j ↗
63. One-step electrochemical synthesis of tunable nitrogen-doped graphene10.1039/C5TA08038J ↗
64. Materials and characterization techniques for high-temperature polymer electrolyte membrane fuel cells10.3762/bjnano.6.8 ↗
65. Graphene Oxide vs Reduced Graphene Oxide as saturable absorbers for Er-doped passively mode-locked fiber laser10.1364/OE.20.019463 ↗
66. Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material10.1038/nnano.2008.83 ↗
67. On the roughness of single-and bi-layer graphene membranes10.1016/j.ssc.2007.02.047 ↗
68. Effects of initial graphite particle size and shape on oxidation time in graphene oxide prepared by Hummers' method
69. Influence of different improved hummers method modifications on the characteristics of graphite oxide in order to make a more easily scalable method10.1021/acs.iecr.6b03533 ↗
70. Effects of particle size and pH value on the hydrophilicity of graphene oxide10.1016/j.apsusc.2013.01.201 ↗
71. Intercalation compounds of graphite10.1080/00018730110113644 ↗
72. Reversible formation of ammonium persulfate/sulfuric acid graphite intercalation compounds and their peculiar Raman spectra10.1021/nn3020147 ↗
73. Direct real-time monitoring of stage transitions in graphite intercalation compounds10.1021/nn400207e ↗
74. Potential change with intercalation of sulfuric acid into graphite by chemical oxidation10.1016/0008-6223(90)90092-D ↗
75. Graphite intercalation compounds (GICs): a new type of promising anode material for lithium‐ion batteries10.1002/aenm.201300600 ↗
76. Enhancing thermoelectric properties of organic composites through hierarchical nanostructures10.1038/srep03448 ↗
77. Potential oscillations during galvanostatic overoxidation of graphite in aqueous sulphuric acids10.1016/0022-0728(95)03870-M ↗
78. Graphene material preparation through thermal treatment of graphite oxide electrochemically synthesized in aqueous sulfuric acid10.1039/C7RA01678F ↗
79. Hydrazine-reduction of graphite-and graphene oxide10.1016/j.carbon.2011.02.071 ↗
80. Fast and facile preparation of graphene oxide and reduced graphene oxide nanoplatelets10.1021/cm901247t ↗
81. meta-PBI/methylated PBI-OO blend membranes for acid doped HT PEMFC10.1016/j.eurpolymj.2014.06.019 ↗
82. Development of polybenzimidazole/graphene oxide composite membranes for high temperature PEM fuel cells10.1016/j.ijhydene.2016.07.009 ↗
83. Development of new test instruments and protocols for the diagnostic of fuel cell stacks10.1016/j.jpowsour.2010.08.029 ↗
84. Investigation of Nafion®/HPA composite membranes for high temperature/low relative humidity PEMFC operation10.1016/j.memsci.2003.11.016 ↗
85. Flexible micro temperature, voltage and current sensors for local real-time microscopic diagnosis inside high temperature proton exchange membrane fuel cell stack10.1016/j.renene.2017.02.015 ↗
86. Fabrication of crosslinked polybenzimidazole membranes by trifunctional crosslinkers for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2017.12.141 ↗
87. Proton transport in aluminum-substituted mesoporous silica channel-embedded high-temperature anhydrous proton-exchange membrane fuel cells10.1038/s41598-020-66935-5 ↗