journal article·2020-12

Chemical looping induced CH3OH–H2-PEMFC scheme for fuel cell vehicle: Parameter optimization and feasibility analysis

Junpeng Liu, Zhengruo Zhou, Bolun Yue, Zhao Sun, Zhiqiang Sun

Publisher page

Abstract

Abstract In this work, a hybrid system combined with chemical looping methanol reformer (CL-reformer) and high-temperature proton exchange membrane fuel cell (HT-PEMFC) is proposed for the vehicle power supply. The Cu-based chemical looping induced methanol reforming is introduced to optimize the energy supply scheme of fuel cell vehicles. The start-up and working stages of the integrated system are comprehensively considered and simulated via the ASPEN Plus software. In start-up stage, the lattice oxygen participates the oxidative steam reforming of methanol, achieving auto-thermal hydrogen generation and Cu-based oxygen carrier (OC) reduction (Cu2+→Cu0), and the reduced OC can be regenerated by the air oxidation (Cu0→Cu2+); In working stage, the reduced OC (Cu0) plays the role of catalyzing methanol conversion, and the heat generated from HT-PEMFC stack can be recovered by the methanol reforming module. The effects of CL-reformer conditions on the methanol reformate quality and the performance of HT-PEMFC stack are investigated. Furthermore, the feasibility of maintaining thermally neutral of the integrated system is discussed. Simulation results indicate that the CL-reformer-HT-PEMFC system can achieve auto-thermal operation, in which the system electrical efficiencies of 21.6%–26.7% and 47.7% can be obtained at start-up and working stages, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Thermodynamic analysis of methanol steam reforming to produce hydrogen for HT-PEMFC: an optimization study10.1016/j.ijhydene.2018.12.211 ↗
2. CuO/ZnO/Ga2O3 catalyst for low temperature MSR reaction: synthesis, characterization and kinetic model10.1016/j.apcatb.2017.09.040 ↗
3. Comparison of high-temperature and low-temperature polymer electrolyte membrane fuel cell systems with glycerol reforming process for stationary applications10.1016/j.apenergy.2013.04.009 ↗
4. Investigation of electrolyte leaching in the performance degradation of phosphoric acid-doped polybenzimidazole membrane-based high temperature fuel cells10.1016/j.apenergy.2011.12.089 ↗
5. Investigation of electrolyte leaching in the performance degradation of phosphoric acid-doped polybenzimidazole membrane-based high temperature fuel cells10.1016/j.jpowsour.2017.07.109 ↗
6. Achieving high Pt utilization and superior performance of high temperature polymer electrolyte membrane fuel cell by employing low-Pt-content catalyst and microporous layer free electrode design10.1016/j.jpowsour.2019.04.045 ↗
7. A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system10.1016/j.ijhydene.2016.06.211 ↗
8. Thermal behavior and hydrogen production of methanol steam reforming and autothermal reforming with spiral preheating10.1016/j.ijhydene.2010.12.055 ↗
9. Performance and endurance of a high temperature PEM fuel cell operated on methanol reformate10.1016/j.ijhydene.2014.09.007 ↗
10. Hydrogen generation from methanol reforming for fuel cell applications - a review10.1007/s11771-020-4352-8 ↗
11. Liquid-phase catalytic processing of biomass-derived oxygenated hydrocarbons to fuels and chemicals10.1002/anie.200604274 ↗
12. CuO/ZnO catalysts for methanol steam reforming: the role of the support polarity ratio and surface area10.1016/j.apcatb.2015.02.039 ↗
13. Bimetallic Au-Cu, Au-Ni catalysts supported on MWCNTs for oxy-steam reforming of methanol10.1016/j.apcatb.2015.11.047 ↗
14. ZnO-modified zirconia as gold catalyst support for the low-temperature methanol steam reforming reaction10.1016/j.apcatb.2014.02.008 ↗
15. Influence of ZnO facets on Pd/ZnO catalysts for methanol steam reforming10.1021/cs500590t ↗
16. Catalysts for the steam reforming and electrochemical oxidation of methanol10.1134/S0020168518130034 ↗
17. Design, fabrication and performance evaluation of an integrated reformed methanol fuel cell for portable use10.1016/j.jpowsour.2018.04.009 ↗
18. Kinetics and dynamics of methanol steam reforming on CuO/ZnO/alumina catalyst10.1016/j.apcata.2017.04.012 ↗
19. Investigation of the prospect of energy self-sufficiency and technical performance of an integrated PEMFC (proton exchange membrane fuel cell), dairy farm and biogas plant system10.1016/j.apenergy.2014.04.043 ↗
20. Farm-based biogas production, processing, and use in polymer electrolyte membrane (PEM) fuel cells10.1021/ie071292g ↗
21. Conceptual design of an integrated thermally self-sustained methanol steam reformer - high-temperature PEM fuel cell stack manportable power generator10.1016/j.ijhydene.2017.05.057 ↗
22. Modelling of a high-temperature polymer electrolyte membrane fuel cell integrated with a methanol steam reformer cell10.1016/j.apenergy.2017.05.120 ↗
23. Araya · Int. J. Hydrogen Energy · 2016 · 41 · 2131010.1016/j.ijhydene.2016.09.024 ↗
24. A review of the development of high temperature proton exchange membrane fuel cells10.1016/S1872-2067(14)60272-2 ↗
25. Thermal integration of a cylindrically symmetric methanol fuel processor for portable fuel cell power10.1016/j.ijhydene.2010.08.128 ↗
26. Micro methanol reformer combined with a catalytic combustor for a PEM fuel cell10.1016/j.ijhydene.2009.06.024 ↗
27. Integration of high temperature PEM fuel cells with a methanol reformer10.1016/j.jpowsour.2005.02.056 ↗
28. Hydrogen production of two-stage temperature steam reformer integrated with PBI membrane fuel cells to optimize thermal management10.1016/j.ijhydene.2013.01.090 ↗
29. High temperature PEM fuel cell integrated with a cellular membrane methanol steam reformer: experimental and modelling10.1016/j.apenergy.2018.02.029 ↗
30. Heat and fuel coupled operation of a high temperature polymer electrolyte fuel cell with a heat exchanger methanol steam reformer10.1016/j.jpowsour.2017.02.021 ↗
31. Chemical looping oxidative steam reforming of methanol: a new pathway for auto-thermal conversion10.1016/j.apcatb.2020.118758 ↗
32. Enhanced hydrogen production performance through controllable redox exsolution within CoFeAlOx spinel oxygen carrier materials10.1039/C8TA02477D ↗
33. Bio-oil heavy fraction for hydrogen production by iron-based oxygen carrier redox cycle10.1016/j.fuproc.2015.08.007 ↗
34. Continuous hydrogen production from non-aqueous phase bio-oil via chemical looping redox cycles10.1016/j.ijhydene.2016.03.052 ↗
35. Chemical looping beyond combustion - a perspective10.1039/C9EE03793D ↗
36. Oxidative methanol steam reforming on a highly dispersed CuO/CeO2/Al2O3 catalyst prepared by a single-step method10.1016/j.apcatb.2009.05.011 ↗
37. Comparison of high-temperature and low-temperature polymer electrolyte membrane fuelcell systems with glycerol reforming process for stationary applications10.1016/j.apenergy.2013.04.009 ↗
38. A simple model of a high temperature PEM fuel cell10.1016/j.ijhydene.2009.11.012 ↗
39. Synergistic decarbonization and desulfurization of blast furnace gas via a novel magnesium-molybdenum looping process10.1016/j.fuel.2020.118418 ↗
40. Catalytic performance of Ni-Cu/Al2O3 for effective syngas production by methanol steam reforming10.1016/j.fuel.2018.06.025 ↗
41. Study of a small heat and power PEM fuel cell system generator10.1016/j.jpowsour.2005.08.022 ↗