journal article·2020-10

Poison mitigation strategies for the use of impure hydrogen in electrochemical hydrogen pumps and fuel cells

C. Jackson, L.F.J.M. Raymakers, M.J.J. Mulder, A.R.J. Kucernak

Publisher page

Abstract

Abstract A new approach to mitigate against common poisons present in hydrogen for electrochemical hydrogen compressors and fuel cells is introduced. This approach uses the inclusion of ozone in the oxygen bleed as a poison mitigation strategy (online cleaning). This ozone treatment is also used to recover systems which have already been degraded by exposure to poisons (offline treatment). The different poisons studied are representative of products from a steam methane reformer (SMR), hydrogen contaminated by H2S, and an SMR feed contaminated with H2S. The efficacy of the cleaning methodology on the performance of an electrochemical hydrogen pump (EHP) and polymer electrolyte fuel cell are evaluated by comparing to the performance achieved when using pure hydrogen. Gas compositions containing ozone were more effective than O2 alone in cleaning poisons such as COad and Sad from the Pt and PtRu catalysts, thus, increasing the current densities and efficiencies of the EHP and polymer fuel cell. For the more severely poisoned streams, inclusion of ozone doubles the achievable current density. The mechanisms of catalyst regeneration using O2 and O2/O3 bleeds, following COad and Sad poisoning, involved both electrochemical and heterogeneous oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. 2013
2. 2019
3. 2018
4. International Organization for Standardization · 2019
5. Linde pioneers hydrogen compression techniques for fuel cell electric vehicles10.1016/S1464-2859(14)70266-4 ↗
6. Fueling protocols for light duty gaseous hydrogen surface vehicles
7. U. S. Department of Energy, Hydrogen Production: Natural Gas Reforming.
8. High pressure autothermal reforming (HP ATR)
9. Probability of occurrence of ISO 14687-2 contaminants in hydrogen: principles and examples from steam methane reforming and electrolysis (water and chlor-alkali) production processes model10.1016/j.ijhydene.2018.03.084 ↗
10. Hydrogen Europe · 2017
11. Electrochemical hydrogen compression10.1149/06403.1009ecst ↗
12. The compression of hydrogen in an electrochemical cell based on a PE fuel cell design10.1016/S0378-7753(01)00941-7 ↗
13. Development and testing of a highly efficient proton exchange membrane (PEM) electrolyzer stack10.1016/j.ijhydene.2011.01.129 ↗
14. Advances in electrochemical hydrogen compression and purification10.1149/07514.0503ecst ↗
15. How ionic are room-temperature ionic liquids? An indicator of the physicochemical properties10.1021/jp064159v ↗
16. Macromolecules in ionic liquids: progress, challenges, and opportunities10.1021/ma800171k ↗
17. Transport in proton conductors for fuel-cell Applications: simulations, elementary reactions, and phenomenology10.1021/cr020715f ↗
18. Qanungo · 2009
19. A study on composite PtRu(1:1)-PtSn(3:1) anode catalyst for PEMFC10.1016/j.jpowsour.2005.02.067 ↗
20. Safety Codes Standards Program Fuel Cell Technologies Office U. S. Department of Energy, Hydrogen Fuel Quality Specifications for Polymer Electrolyte Fuel Cells in Road Vehicles.
21. Transient analysis of carbon monoxide poisoning and oxygen bleeding in a PEM fuel cell anode catalyst layer10.1016/j.ijhydene.2007.12.060 ↗
22. Carbon monoxide poisoning of proton exchange membrane fuel cells10.1002/er.713 ↗
23. Dependence of PEM fuel cell performance on catalyst loading10.1016/j.jpowsour.2003.09.013 ↗
24. The effect of internal air bleed on CO poisoning in a proton exchange membrane fuel cell10.1016/j.jpowsour.2009.02.058 ↗
25. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation10.1016/j.jpowsour.2006.12.012 ↗
26. The effects of hydrogen sulfide on the polymer electrolyte membrane fuel cell anode catalyst: H2S–Pt/C interaction products10.1016/j.jpowsour.2011.04.017 ↗
27. Gas phase recovery of hydrogen sulfide contaminated polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2013.11.077 ↗
28. Using corrosion-like processes to remove poisons from electrocatalysts: a viable strategy to chemically regenerate irreversibly poisoned polymer electrolyte fuel cells10.1016/j.electacta.2016.11.054 ↗
29. The primary reaction in the decomposition of ozone in acidic aqueous-solutions10.1021/es00021a010 ↗
30. Decomposition of ozone in aqueous acetic-acid solutions (ph 0-4)10.1021/j100181a084 ↗
31. Effect of CO2 on the performance of an electrochemical hydrogen compressor
32. Electrochemical hydrogen pumping using a high-temperature polybenzimidazole (PBI) membrane10.1016/j.jpowsour.2007.11.059 ↗
33. Efficiency of hydrogen recovery from reformate with a polymer electrolyte hydrogen pump10.1002/aic.12406 ↗
34. Characterizations of polybenzimidazole based electrochemical hydrogen pumps with various Pt loadings for H2/CO2 gas separation10.1016/j.ijhydene.2013.08.142 ↗
35. Electrochemical hydrogen pump with SPEEK/CrPSSA semi-interpenetrating polymer network proton exchange membrane for H2/CO2 separation10.1021/sc400329s ↗
36. Coupling hydrogen separation with butanone hydrogenation in an electrochemical hydrogen pump with sulfonated poly (phthalazinone ether sulfone ketone) membrane10.1016/j.jpowsour.2016.07.025 ↗
37. High temperature type protonic conductor based on SrCeO3 and its application to the extraction of hydrogen gas10.1016/0167-2738(86)90299-7 ↗
38. Assessing electrocatalyst hydrogen activity and CO tolerance: comparison of performance obtained using the high mass transport ‘floating electrode’ technique and in electrochemical hydrogen pumps10.1016/j.apcatb.2020.118734 ↗
39. Schroeder · 2005
40. 2009
41. General models for the electrochemical hydrogen oxidation and hydrogen evolution reactions: theoretical derivation and experimental results under near mass-transport free conditions10.1021/acs.jpcc.6b00011 ↗
42. Systematic study of Pt-Ru/C catalysts prepared by chemical deposition for direct methanol fuel cells10.1007/s12678-017-0359-9 ↗
43. Temperature dependence of CO-tolerant hydrogen oxidation reaction activity at Pt, Pt−Co, and Pt−Ru electrodes10.1021/jp064190x ↗
44. Electrocatalysis by ad-atoms: Part III. Enhancement of the oxidation of carbon monoxide on platinum by ruthenium ad-atoms10.1016/S0022-0728(75)80262-2 ↗
45. Modeling the electro-oxidation of CO and H2/CO on Pt, Ru, PtRu and Pt3Sn10.1016/S0013-4686(03)00538-3 ↗
46. Electrocatalysis of CO tolerance by carbon-supported PtMo electrocatalysts in PEMFCs10.1149/1.1759363 ↗
47. Electrocatalysis of reformate tolerance in proton exchange membranes fuel cells: Part I
48. CO Tolerance of Pt alloy electrocatalysts for polymer electrolyte fuel cells and the detoxification mechanism10.1039/b007768m ↗
49. Effect of PtRu alloying degree on electrocatalytic activities and stabilities10.1016/j.apcatb.2010.12.023 ↗
50. Carbon-supported Pt and PtRu nanoparticles as catalysts for a direct methanol fuel cell10.1021/jp049422b ↗
51. Zhang · 2009
52. Quantifying the ‘reverse water gas shift’ reaction inside a PEM fuel cell10.1016/j.apcatb.2004.08.016 ↗
53. Organometallic complexes anchored to conductive carbon for electrocatalytic oxidation of methane at low temperature10.1021/jacs.5b06392 ↗
54. Standard electrode potentials and temperature coefficients in water at 298.15 K10.1063/1.555839 ↗
55. Sustained potential oscillations in proton exchange membrane fuel cells with PtRu as anode catalyst10.1149/1.1511752 ↗
56. Dynamic behavior of a PEM fuel cell during electrochemical CO oxidation on a PtRu anode10.1007/s11244-008-9117-9 ↗
57. Change of electrochemical impedance spectra during CO poisoning of the Pt and Pt–Ru anodes in a membrane fuel cell (PEFC)10.1016/S0013-4686(03)00528-0 ↗
58. Evaluation of parameters accelerating the aging of PEMFCs operating under reformate containing carbon monoxide10.1149/2.0281806jes ↗
59. Coadsorption of sulphur and hydrogen on platinum (110) studied by radiotracer and electrochemical techniques10.1016/0039-6028(85)90826-X ↗
60. Structure of chemisorbed sulfur on a Pt(111) electrode10.1021/ja962637h ↗
61. Analysis and modeling of PEM fuel cell stack performance: effect of in situ reverse water gas shift reaction and oxygen bleeding10.1016/j.jpowsour.2005.11.104 ↗
62. Effects of anode air bleeding on the performance of CO-poisoned proton-exchange membrane fuel cells10.1016/j.jpowsour.2009.09.062 ↗
63. The influence of CO2, CO and air bleed on the current distribution of a polymer electrolyte fuel cell10.1016/j.ijhydene.2008.02.002 ↗
64. Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cell10.1016/j.jpowsour.2009.04.021 ↗