journal article·2019-11Open access

Effect of cell compression on the water dynamics of a polymer electrolyte fuel cell using in-plane and through-plane in-operando neutron radiography

Nivedita Kulkarni, Jason I.S. Cho, Lara Rasha, Rhodri E. Owen, Yunsong Wu, Ralf Ziesche, Jennifer Hack, Toby Neville, Michael Whiteley, Nikolay Kardjilov, Henning Markötter, Ingo Manke, Paul R. Shearing, Dan J.L. Brett

Abstract

Abstract Water dynamics in the membrane electrode assembly (MEA) and flow channels of polymer electrolyte fuel cells (PEFCs) is governed by the complex interplay of many physical and operational factors. The chemical nature and structure of the gas diffusion layer (GDL) plays a large part in this and is affected by the extent to which is mechanically compressed. Here, X-ray computed tomography shows the effect of cell compression on the MEA, and how it differs under the land and channel regions. Multi-orientation neutron radiography reveals the effect of compression on the way in which water accumulates and is transported between land and channel and between cathode and anode. By performing neutron imaging in both the in-plane and through-plane directions, it is possible to determine what constitutes a given ‘thickness’ of water mapped across the extent of an MEA. Changing MEA compression from 25% to 35% has a significant effect on water distribution and dynamics in operational cells. The effect of compression on performance is most marked in the mass transport region, and there are consequences for liquid accumulation in channels and back-diffusion of water from the cathode to the anode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Nuclear Physics and Applications · Machine Learning in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Ex situ visualization of liquid water transport in PEM fuel cell gas diffusion layers10.1016/j.jpowsour.2005.03.199 ↗
2. Computational modelling of polymer electrolyte membrane (PEM) fuel cells: challenges and opportunities10.1016/j.energy.2006.08.007 ↗
3. A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells10.1016/j.jpowsour.2009.12.123 ↗
4. PEM fuel cells: theory and practice
5. Effect of anode and cathode flow field design on the performance of a direct methanol fuel cell10.1016/j.cej.2009.11.033 ↗
6. Review of materials and characterization methods for polymer electrolyte fuel cell flow-field plates10.1115/1.2393303 ↗
7. Liquid-water interactions with gas-diffusion-layer surfaces10.1149/2.0321412jes ↗
8. Mechanisms and effects of mechanical compression and dimensional change in polymer electrolyte fuel cells – a review10.1016/j.jpowsour.2015.02.111 ↗
9. Effect of clamping pressure on ohmic resistance and compression of gas diffusion layers for polymer electrolyte fuel cells10.1016/j.jpowsour.2012.07.021 ↗
10. Simultaneous thermal and visual imaging of liquid water of the PEM fuel cell flow channels10.1016/j.joei.2018.01.005 ↗
11. Visualization of water buildup in the cathode of a transparent PEM fuel cell10.1016/S0378-7753(03)00797-3 ↗
12. An experimental study on water transport through the membrane of a PEFC operating in the dead-end mode10.1016/j.ijhydene.2009.07.010 ↗
13. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
14. Influences of flow direction, temperature and relative humidity on the performance of a representative anion exchange membrane fuel cell: a computational analysis10.1016/j.ijhydene.2016.12.003 ↗
15. Understanding impacts of catalyst-layer thickness on fuel-cell performance via mathematical modeling10.1149/2.1161607jes ↗
16. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
17. Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte10.1002/aic.690370805 ↗
18. A three-dimensional analysis of the effect of anisotropic gas diffusion layer(GDL) thermal conductivity on the heat transfer and two-phase behavior in a proton exchange membrane fuel cell(PEMFC)10.1016/j.jpowsour.2009.09.059 ↗
19. Rigorous 3-D mathematical modeling of PEM fuel cells10.1149/1.1615609 ↗
20. Numerical matching of anisotropic transport processes in porous electrodes of proton exchange membrane fuel cells10.1016/j.ces.2018.11.034 ↗
21. Homogenization of current density of PEM fuel cells by in-plane graded distributions of platinum loading and GDL porosity10.1016/j.ces.2018.08.029 ↗
22. Effect of Gdl(+MPL) compression on the PEM fuel cell performance
23. A novel polymer electrolyte fuel cell for laboratory investigations and in-situ contact resistance measurements10.1016/S0013-4686(01)00510-2 ↗
24. Measurement of the clamping pressure distribution in polymer electrolyte fuel cells using piezoresistive sensor arrays and digital image correlation techniques10.1016/j.jpowsour.2011.06.017 ↗
25. Effect of gas diffusion layer composition on the performance of liquid direct methanol fuel cells
26. Examining the effect of the secondary flow-field on polymer electrolyte fuel cells using X-ray computed radiography and computational modelling10.1016/j.ijhydene.2018.11.038 ↗
27. Analysis of liquid water transport in cathode catalyst layer of PEM fuel cells10.1016/j.ijhydene.2009.12.160 ↗
28. Effective transport coefficients in PEM fuel cell catalyst and gas diffusion layers: beyond Bruggeman approximation10.1016/j.apenergy.2009.05.006 ↗
29. Inhomogeneous compression of PEMFC gas diffusion layer10.1016/j.jpowsour.2006.11.018 ↗
30. Effect of inhomogeneous compression of gas diffusion layer on the performance of PEMFC with interdigitated flow field10.1016/j.enconman.2015.12.012 ↗
31. Heterogeneous porosity distributions of polymer electrolyte membrane fuel cell gas diffusion layer materials with rib-channel compression10.1016/j.ijhydene.2016.06.147 ↗
32. Hottinen · 2007
33. Influence of hydrophobic treatment on the structure of compressed gas diffusion layers10.1016/j.jpowsour.2016.05.118 ↗
34. The effect of non-uniform compression and flow-field arrangements on membrane electrode assemblies - X-ray computed tomography characterisation and effective parameter determination10.1016/j.jpowsour.2019.04.018 ↗
35. The role of compressive stress on gas diffusion media morphology and fuel cell performance
36. Effects of compression on water distribution in gas diffusion layer materials of PEMFC in a point injection device by means of synchrotron X-ray imaging10.1016/j.ijhydene.2017.11.047 ↗
37. A study of the effect of water management and electrode flooding on the dimensional change of polymer electrolyte fuel cells10.1016/j.jpowsour.2013.05.045 ↗
38. Nitta · 2008
39. In situ investigation of water transport in an operating PEM fuel cell using neutron radiography: Part 1 – experimental method and serpentine flow field results10.1016/j.ijheatmasstransfer.2006.07.003 ↗
40. Impact of channel wall hydrophobicity on through-plane water distribution and flooding behavior in a polymer electrolyte fuel cell10.1016/j.electacta.2009.11.095 ↗
41. Effect of ageing of gas diffusion layers on the water distribution in flow field channels of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2015.10.004 ↗
42. Analysis of liquid water formation in polymer electrolyte membrane (PEM) fuel cell flow fields with a dry cathode supply10.1016/j.jpowsour.2015.12.060 ↗
43. Neutron tomographic investigations of water distributions in polymer electrolyte membrane fuel cell stacks10.1016/j.jpowsour.2012.07.043 ↗
44. Liquid water distribution patterns featuring back-diffusion transport in a PEM fuel cell with neutron imaging10.1016/j.ijhydene.2014.08.042 ↗
45. Water build-up and evolution during the start-up of a PEMFC: visualization by means of Neutron Imaging10.1016/j.ijhydene.2016.11.076 ↗
46. Nitrogen front evolution in purged polymer electrolyte membrane fuel cell with dead-ended anode10.1149/1.3425743 ↗
47. Water distribution analysis in the outer perimeter region of technical PEFC based on neutron radiography10.1149/2.0351507jes ↗
48. CONRAD-2: cold neutron tomography and radiography at BER II (V7)10.17815/jlsrf-2-108 ↗
49. Large area high resolution neutron imaging detector for fuel cell research10.1016/j.jpowsour.2011.01.049 ↗
50. Advances in neutron imaging10.1016/j.mattod.2018.03.001 ↗
51. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
52. CONRAD-2: the new neutron imaging instrument at the Helmholtz-Zentrum Berlin10.1107/S1600576715023353 ↗
53. Effect of gas diffusion layer properties on water distribution across air-cooled, open-cathode polymer electrolyte fuel cells: a combined ex-situ X-ray tomography and in-operando neutron imaging study10.1016/j.electacta.2016.06.068 ↗
54. In situ observation of the water distribution across a PEFC using high resolution neutron radiography10.1016/j.elecom.2008.01.018 ↗
55. A novel approach coupling neutron imaging and numerical modelling for the analysis of the impact of water on fuel cell performance10.1016/j.energy.2014.03.014 ↗
56. Update on numerical model for the performance prediction of a PEM Fuel Cell10.1016/j.ijhydene.2011.04.102 ↗
57. Visualization of liquid water in a lung-inspired flow-field based polymer electrolyte membrane fuel cell via neutron radiography10.1016/j.energy.2018.12.143 ↗
58. Effect of serpentine flow-field design on the water management of polymer electrolyte fuel cells: an in-operando neutron radiography study10.1016/j.jpowsour.2018.07.085 ↗
59. Effect of compression on the water management of polymer electrolyte fuel cells: an in-operando neutron radiography study10.1016/j.jpowsour.2018.11.048 ↗
60. Experimental study and comparison of various designs of gas flow fields to PEM fuel cells and cell stack performance10.3389/fenrg.2014.00002 ↗
61. CFD study on flow distribution uniformity in fuel distributors having multiple structural bifurcations of flow channels10.1016/j.ijhydene.2010.06.043 ↗
62. Investigation of hot pressed polymer electrolyte fuel cell assemblies via X-ray computed tomography10.1016/j.electacta.2017.05.028 ↗
63. Effect of gas diffusion layer compression on PEM fuel cell performance10.1016/j.jpowsour.2005.11.069 ↗
64. Impacts of inhomogeneous clamping force on local performance and liquid water formation in polymer electrolyte fuel cells10.1016/j.ijhydene.2017.06.139 ↗
65. Liquid water saturation and oxygen transport resistance in polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.electacta.2018.04.050 ↗
66. In operando measurements of liquid water saturation distributions and effective diffusivities of polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.electacta.2016.05.180 ↗
67. Investigating the effects of gas diffusion layer substrate thickness on polymer electrolyte membrane fuel cell performance via synchrotron X-ray radiography10.1016/j.electacta.2017.03.162 ↗
68. Combined neutron radiography and locally resolved current density measurements of operating PEM fuel cells10.1016/j.jpowsour.2007.08.058 ↗
69. Inhomogeneous compression of PEMFC gas diffusion layer10.1016/j.jpowsour.2006.10.076 ↗
70. Investigations on dynamic water transport characteristics in flow field channels using neutron imaging techniques10.1016/j.jpowsour.2013.01.196 ↗
71. Simultaneous characterization of oxygen transport resistance and spatially resolved liquid water saturation at high-current density of polymer electrolyte membrane fuel cells with varied cathode relative humidity10.1016/j.ijhydene.2017.10.031 ↗
72. Two dimensional modelling of water uptake in proton exchange membrane fuel cell10.1016/j.ijhydene.2014.08.128 ↗
73. Isolation of transport mechanisms in PEFCs using high resolution neutron imaging10.1016/j.ijhydene.2013.12.021 ↗
74. A two dimensional agglomerate model for a proton exchange membrane fuel cell10.1016/j.energy.2013.08.026 ↗
75. Liquid-water-droplet adhesion-force measurements on fresh and aged fuel-cell gas-diffusion layers10.1149/2.052205jes ↗
76. Capillaries for water management in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2018.10.030 ↗
77. Dead-ended anode polymer electrolyte fuel cell stack operation investigated using electrochemical impedance spectroscopy, off-gas analysis and thermal imaging10.1016/j.jpowsour.2013.11.125 ↗
78. The role of the gas diffusion layer on slug formation in gas flow channels of fuel cells10.1016/j.ijhydene.2013.09.073 ↗
79. Residence time of water film and slug flow features in fuel cell gas channels and their effect on instantaneous area coverage ratio10.1016/j.jpowsour.2015.01.041 ↗
80. A mathematical model for PEMFC in different flow modes10.1016/S0378-7753(03)00584-6 ↗
81. Visualisation of water accumulation in the flow channels of PEMFC under various operating conditions10.1016/j.jpowsour.2008.10.072 ↗
82. Water management studies in PEM fuel cells, part IV: effects of channel surface wettability, geometry and orientation on the two-phase flow in parallel gas channels10.1016/j.ijhydene.2011.04.226 ↗
83. Water management in proton exchange membrane fuel cells using integrated electroosmotic pumping10.1016/j.jpowsour.2006.03.021 ↗
84. Combined current and temperature mapping in an air-cooled, open-cathode polymer electrolyte fuel cell under steady-state and dynamic conditions10.1016/j.jpowsour.2015.07.069 ↗
85. Thermal analysis of air-cooled PEM fuel cells10.1016/j.ijhydene.2012.09.075 ↗
86. Membrane resistance and current distribution measurements under various operating conditions in a polymer electrolyte fuel cell10.1016/j.jpowsour.2007.05.071 ↗
87. Water transport coefficient distribution through the membrane in a polymer electrolyte fuel cell10.1016/j.memsci.2006.10.030 ↗
88. Dynamic simulations of under-rib convection-driven flow-field configurations and comparison with experiment in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2015.05.107 ↗