In-situ tracking of NaFePO4 formation in aqueous electrolytes and its electrochemical performances in Na-ion/polysulfide batteries
Source abstract
Abstract
Abstract In-situ formation of pure olivine NaFePO4 from chemically synthesized LiFePO4 nanoparticles via an electrochemical ion-exchange route in sodium salt containing aqueous electrolyte is reported. Both in-situ electrochemical quartz crystal microbalance (EQCM) and in-situ X-ray diffraction (XRD) measurements are performed to monitor the formation of NaFePO4. Subsequently, a rechargeable Na-ion aqueous polysulfide battery is demonstrated where NaFePO4 and dissolved Na2S5 solution are used as cathode and anolyte, respectively; and are separated from each other by an ion-exchange polymeric membrane. In order to prevent diffusion of Na2S5 polysulfide from the anode to the cathode side, salt concentration at both sides of the NaFePO4||Na2S5 full cell is finely tuned resulting a 45 mAh g−1 cycling capacity over 200 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advanced battery technologies research · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Rechargeable lithium batteries with aqueous electrolytes
2. Lithium intercalation from aqueous solutions10.1149/1.2055118 ↗
3. Toward safe and sustainable batteries: Na4Fe3(PO4)(2)P2O7 as a low cost cathode for rechargeable aqueous Na-ion batteries10.1021/acs.jpcc.7b09803 ↗
4. Electrochemical characterization of NaFePO4 as positive electrode in aqueous sodium-ion batteries10.1016/j.jpowsour.2015.05.006 ↗
5. Na2FeP2O7 as a positive electrode material for rechargeable aqueous sodium-ion batteries10.1039/c3ra47560c ↗
6. Electrochemical characterization of NaFe2(CN)(6) Prussian Blue as positive electrode for aqueous sodium-ion batteries10.1016/j.electacta.2016.05.176 ↗
7. Nickel-substituted copper hexacyanoferrate as a superior cathode for aqueous sodium-ion batteries10.1002/celc.201700958 ↗
8. Nickel hexacyanoferrate nanoparticle electrodes for aqueous sodium and potassium ion batteries10.1021/nl203193q ↗
9. Low-defect Prussian blue nanocubes as high capacity and long life cathodes for aqueous Na-ion batteries10.1016/j.nanoen.2015.02.006 ↗
10. An aqueous electrolyte, sodium ion functional, large format energy storage device for stationary applications10.1016/j.jpowsour.2012.04.018 ↗
11. Na4Mn9O18 as a positive electrode material for an aqueous electrolyte sodium-ion energy storage device10.1016/j.elecom.2010.01.020 ↗
12. A new sodium-based aqueous rechargeable battery system: the special case of Na0.44MnO2/dissolved sodium polysulfide10.1002/ente.201700245 ↗
13. Towards high power high energy aqueous sodium‐ion batteries: the NaTi2 (PO4) 3/Na0. 44MnO2 system10.1002/aenm.201200598 ↗
14. Relating electrolyte concentration to performance and stability for NaTi2(PO4)3/Na0.44MnO2 aqueous sodium-ion batteries10.1149/2.0121506jes ↗
15. A low-cost and environmentally benign aqueous rechargeable sodium-ion battery based on NaTi2(PO4)(3)-Na2NiFe(CN)(6) intercalation chemistry10.1016/j.elecom.2013.03.013 ↗
16. A solid sulfur cathode for aqueous batteries10.1126/science.261.5124.1029 ↗
17. Visco · 2013
18. An aqueous electrolyte rechargeable Li-ion/polysulfide battery10.1039/C4TA01308E ↗
19. Use of ion-selective polymer membranes for an aqueous electrolyte rechargeable Li-ion-polysulphide battery10.1039/C4TA05756B ↗
20. Rechargeable zinc-aqueous polysulfide battery with a mediator-ion solid electrolyte10.1021/acsami.8b00981 ↗
21. Synthesis and electrochemical analysis of vapor-deposited carbon-coated LiFePO410.1016/j.elecom.2005.06.019 ↗
22. Verwendung von schwingquarzen zur wagung dunner schichten und zur mikrowagung10.1007/BF01337937 ↗
23. Immunodetection by quartz crystal microbalance - a new approach for direct detection of rabbit IgG and peroxidase10.1385/ABAB:89:2-3:139 ↗
24. An electrochemical cell for operando study of lithium batteries using synchrotron radiation10.1149/1.3355977 ↗
25. Reduction Fe3+ of impurities in LiFePO4 from pyrolysis of organic precursor used for carbon deposition10.1149/1.2213527 ↗
26. Raman and FTIR spectroscopic study of LixFePO4 (0 <= x <= 1)10.1149/1.1756885 ↗
27. Electrochemical characterization of LiCoO 2 as rechargeable electrode in aqueous LiNO 3 electrolyte10.1016/j.ssi.2010.05.043 ↗
28. Factors affecting the electrochemical reactivity vs. lithium of carbon-free LiFePO 4 thin films10.1016/j.jpowsour.2007.09.085 ↗
29. Is LiFePO4 stable in water? Toward greener Li–ion batteries10.1149/1.2795833 ↗
30. Nonstoichiometric LiFePO4: defects and related properties10.1021/cm803408y ↗
31. Investigation on capacity fading of LiFePO 4 in aqueous electrolyte10.1016/j.electacta.2010.11.027 ↗
32. Fast sodiation/desodiation reactions of electrochemically delithiated olivine LiFePO 4 in aerated aqueous NaNO 3 solution10.1016/j.jpowsour.2013.08.062 ↗
33. Crystal chemistry of Na insertion/deinsertion in FePO 4–NaFePO 410.1039/c2jm33639a ↗
34. High-performance NaFePO4 formed by aqueous ion-exchange and its mechanism for advanced sodium ion batteries10.1039/C6TA01111J ↗
35. In situ tracking of ion insertion in iron phosphate olivine electrodes via electrochemical quartz crystal admittance10.1021/jp3117819 ↗
36. In situ tracking of hydrodynamic and viscoelastic changes in electrophoretically deposited LiFePO4 electrodes during their charging/discharging10.1134/S1023193517090038 ↗
37. In-situ mass-electrochemical study of surface redox potential and interfacial chemical reactions of Li(Na)FePO4 nanocrystals for Li(Na)-ion batteries10.1016/j.nanoen.2017.05.019 ↗
38. In situ acoustic diagnostics of particle-binder interactions in battery electrodes10.1016/j.joule.2018.02.014 ↗
39. In situ multilength-scale tracking of dimensional and viscoelastic changes in composite battery electrodes10.1021/acsami.7b06243 ↗
40. A high-capacity and long-life aqueous rechargeable zinc battery using a metal oxide intercalation cathode10.1038/nenergy.2016.119 ↗
41. Phase transition analysis between LiFePO4 and FePO4 by in-situ time-resolved x-ray absorption and x-ray diffraction10.1149/2.012305jes ↗
42. Nanoscale visualization of redox activity at lithium-ion battery cathodes10.1038/ncomms6450 ↗
43. Nanoscale imaging of lithium ion distribution during in situ operation of battery electrode and electrolyte10.1021/nl404577c ↗
44. In situ electrochemical-AFM study of LiFePO4 thin film in aqueous electrolyte10.1186/s11671-016-1446-1 ↗
45. Investigation of the effect of using Al2O3-nafion barrier on room-temperature Na-S batteries10.1021/acs.jpcc.7b04711 ↗
46. Novel aqueous aluminum/sulfur batteries10.1149/1.2056120 ↗
47. An aqueous electrolyte rechargeable Li-ion/polysulfide battery10.1039/C4TA01308E ↗
48. Use of ion-selective polymer membranes for an aqueous electrolyte rechargeable Li-ion–polysulphide battery10.1039/C4TA05756B ↗
49. A high-energy and low-cost polysulfide/iodide redox flow battery10.1016/j.nanoen.2016.09.043 ↗
50. Li‐S battery analyzed by UV/vis in operando mode10.1002/cssc.201300142 ↗
51. Effects of the mass balance ratio and the cut-off voltage on the performance of a graphite (KS-6)/TiO2 (anatase) energy storing system10.1016/S1452-3981(23)07708-8 ↗
52. A new sodium‐based aqueous rechargeable battery system: the special case of Na0. 44MnO2/Dissolved sodium polysulfide10.1002/ente.201700245 ↗