journal article·2018-08Open access

Performance investigation of a micro-tubular flame-assisted fuel cell stack with 3,000 rapid thermal cycles

Ryan J. Milcarek, Michael J. Garrett, Thomas S. Welles, Jeongmin Ahn

Abstract

Abstract Solid oxide fuel cell research and development has faced challenges with slow startup, slow shutdown and a limited number of thermal cycles, which hinders the technology in areas like micro-combined heat and power. A novel micro combined heat and power system, based on a boiler/hot water heater with integrated micro-tubular flame assisted fuel cells (mT-FFCs), is proposed which requires rapid startup, shutdown and thousands of thermal cycles. A 9 cell mT-FFC stack is developed and operated in a two-stage combustor. Rapid startup and shutdown of the fuel cells is demonstrated. The first-stage combustor is ignited, turned off and re-ignited for a total of 3000 on/off, thermal cycles. A maximum heating rate of 966 °C.min −1 and a maximum cooling rate of 353 °C.min −1 is achieved while thermal cycling. Despite the presence of CO in the exhaust, the anode remains porous and crack free after ∼150 h of thermal cycling testing. The mT-FFC stack continues to generate significant power, even after completing the cycling test, and a low voltage degradation rate is reported.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Modeling solid oxide fuel cell operation: approaches, techniques and results10.1016/j.jpowsour.2005.11.045 ↗
2. A solid oxide fuel cell system for buildings10.1016/j.enconman.2006.09.010 ↗
3. Performance investigation of dual layer yttria-stabilized zirconia–samaria-doped ceria electrolyte for intermediate temperature solid oxide fuel cells10.1115/1.4032708 ↗
4. Performance variation with SDC buffer layer thickness10.1016/j.ijhydene.2016.04.113 ↗
5. Office of energy efficiency & renewable energy
6. Improvement of thermal cycle characteristics of a planar-type solid oxide fuel cell by using ceramic fiber as sealing material10.1016/S0378-7753(00)00405-5 ↗
7. Recent results of the SOFC APU development at DLR
8. Sealing technology for solid oxide fuel cells10.1111/j.1744-7402.2007.02128.x ↗
9. Cycling of three solid oxide fuel cell types10.1016/j.jpowsour.2007.01.029 ↗
10. Metal-supported solid oxide fuel cell membranes for rapid thermal cycling10.1016/j.ssi.2004.09.056 ↗
11. Micro solid oxide fuel cell fabricated on porous stainless steel: a new strategy for enhanced thermal cycling ability10.1038/srep22443 ↗
12. Ultra-low leak rate of hybrid compressive mica seals for solid oxide fuel cells10.1016/S0378-7753(02)00356-7 ↗
13. The status of SOFC development at versa power systems
14. Residual stress and thermal cycling of planar solid oxide fuel cells10.1179/026708307X232910 ↗
15. Influence of different perovskite interlayers on the electrical conductivity between La0.65Sr0.3MnO3 and Fe/Cr-based steels10.1016/j.ssi.2006.01.046 ↗
16. Cycling studies of solid oxide fuel cells10.1016/j.jpowsour.2006.01.060 ↗
17. Ageing of anode-supported solid oxide fuel cell stacks including thermal cycling, and expansion behaviour of MgO-NiO anodes10.1016/j.jpowsour.2008.03.006 ↗
18. High performance direct flame fuel cell using a propane flame10.1016/j.proci.2010.07.047 ↗
19. Solid oxide fuel cells operating on uniform mixtures of fuel and air10.1016/0167-2738(95)00210-W ↗
20. Raz · Supported mixed-gas fuel cells · 2002 · 149 · 335
21. On the single chamber solid oxide fuel cells10.1016/j.jpowsour.2007.09.041 ↗
22. Electrochemical power generation directly from combustion flame of gases, liquids, and solids10.1149/1.1778168 ↗
23. A direct-flame solid oxide fuel cell (DFFC) operated on methane, propane, and butane10.1016/j.jpowsour.2006.12.074 ↗
24. Direct-flame solid-oxide fuel cell (DFFC): a thermally self-sustained, air self- breathing, hydrocarbon-operated SOFC system in a simple, No-Chamber setup10.1149/1.2729136 ↗
25. Modeling, simulation and optimization of a no-chamber solid oxide fuel cell operated with a flat-flame burner10.1016/j.jpowsour.2010.04.030 ↗
26. Study on direct flame solid oxide fuel cell using flat burner and ethylene flame10.1149/06801.1989ecst ↗
27. A direct flame solid oxide fuel cell for potential combined heat and power generation10.1016/j.ijhydene.2012.02.161 ↗
28. The study of portable direct-flame solid oxide fuel cell (DF-SOFC) stack with butane fuel10.1016/S1872-5813(14)60045-1 ↗
29. A micro tri-generation system based on direct flame fuel cells for residential applications10.1016/j.ijhydene.2014.01.183 ↗
30. Power generation properties of direct flame fuel cell (DFFC)10.1088/1742-6596/557/1/012119 ↗
31. A high-performance no-chamber fuel cell operated on ethanol flame10.1016/j.jpowsour.2007.11.004 ↗
32. Experimental characterization of a direct methane flame solid oxide fuel cell power generation unit10.1149/2.0381414jes ↗
33. Thermal shock resistance and failure probability analysis on solid oxide electrolyte direct flame fuel cells10.1016/j.jpowsour.2014.01.035 ↗
34. Flame-assisted fuel cells running methane
35. Direct flame SOFCs with La 0.75Sr0.25Cr0.5Mn0.5O3−δ∕Ni coimpregnated yttria-stabilized zirconia anodes operated on liquefied petroleum gas flame10.1149/1.3500976 ↗
36. Integration of solid oxide fuel cells with multi-element diffusion flame burners10.1149/2.051311jes ↗
37. A study on energy conversion efficiency of direct flame fuel cell supported by clustered diffusion microflames10.1088/1742-6596/557/1/012120 ↗
38. Performance characteristics of a micro-tubular solid oxide fuel cell operated with a fuel-rich methane flame10.1149/06801.2237ecst ↗
39. Power generation performance of direct flame fuel cell (DFFC) impinged by small jet flames10.1088/0960-1317/25/10/104015 ↗
40. Start-up and operation characteristics of a flame fuel cell unit10.1016/j.apenergy.2016.06.067 ↗
41. Power and heat co-generation by micro-tubular flame fuel cell on a porous media burner10.1016/j.energy.2016.04.095 ↗
42. Metal-supported solid oxide fuel cells operated in direct-flame configuration10.1016/j.ijhydene.2017.07.224 ↗
43. Biogas-fueled flame fuel cell for micro-combined heat and power system10.1016/j.enconman.2017.06.039 ↗
44. Thermal stability of portable microtubular SOFCs and stacks10.1149/1.2953590 ↗
45. Review of the micro-tubular solid oxide fuel cell. Part I. Stack design issues and research activities10.1016/j.jpowsour.2009.02.085 ↗
46. Improved redox and thermal cycling resistant tubular ceramic fuel cells10.1149/1.3570016 ↗
47. Performance of microtubular SOFCs with infiltrated electrodes under thermal cycling10.1016/j.ijhydene.2012.10.098 ↗
48. Progress in microtubular solid oxide fuel cells10.1111/j.1744-7402.2008.02350.x ↗
49. Micro-tubular flame-assisted fuel cells for micro-combined heat and power systems10.1016/j.jpowsour.2015.12.018 ↗
50. Micro-tubular flame-assisted fuel cells running methane
51. Micro-tubular flame-assisted fuel cell stacks10.1016/j.ijhydene.2016.09.005 ↗
52. Combustion characterization and model fuel development for micro-tubular flame-assisted fuel cells10.3791/54638 ↗
53. Micro-tubular flame-assisted fuel cells10.1299/jfst.2017jfst0021 ↗
54. Arena · 2013
55. Rich-burn, flame-assisted fuel cell, quick-mix, lean-burn (RFQL) combustor and power generation10.1016/j.jpowsour.2018.02.006 ↗
56. Performance and long term degradation of 7 W micro-tubular solid oxide fuel cells for portable applications10.1016/j.jpowsour.2015.03.030 ↗
57. Thermal cycling of advanced compressive seals for solid oxide fuel cells10.1016/S0378-7753(02)00444-5 ↗
58. Development of a multilayer anode for solid oxide fuel cells10.1016/S0167-2738(02)00357-0 ↗
59. Thermo-mechanical stability of multi-scale-architectured thin-film-based solid oxide fuel cells assessed by thermal cycling tests10.1016/j.jpowsour.2013.10.101 ↗
60. Accelerated testing of solid oxide fuel cell stacks for micro combined heat and power application10.1016/j.jpowsour.2015.09.054 ↗
61. Cube-type micro SOFC stacks using sub-millimeter tubular SOFCs10.1016/j.jpowsour.2008.05.026 ↗
62. Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions10.1016/j.jpowsour.2009.10.064 ↗
63. Hart · 2004
64. Internal carbon dioxide reforming by methane over Ni-YSZ-CeO2 catalyst electrode in electrochemical cell10.1016/S0926-860X(01)00735-9 ↗
65. Methane steam reforming over Fe electrodes in a solid electrolyte cell10.1021/ef00040a010 ↗
66. O'Hayre · 2009
67. Electrochemical oxidation of H2 and CO in a H2-H2O-CO-CO2 system at the interface of a Ni-YSZ cermet electrode and YSZ electrolyte10.1149/1.1393409 ↗