journal article·2017-09Open access

Assessing the impact of electrolyte conductivity and viscosity on the reactor cost and pressure drop of redox-active polymer flow batteries

Vinay A. Iyer, Jonathon K. Schuh, Elena C. Montoto, V. Pavan Nemani, Shaoyi Qian, Gavvalapalli Nagarjuna, Joaquín Rodríguez-López, Randy H. Ewoldt, Kyle C. Smith

Abstract

Abstract Redox-active small molecules, used traditionally in redox flow batteries (RFBs), are susceptible to crossover and require expensive ion exchange membranes (IEMs) to achieve long lifetimes. Redox-active polymer (RAP) solutions show promise as candidate electrolytes to mitigate crossover through size-exclusion, enabling the use of porous separators instead of IEMs. Here, poly(vinylbenzyl ethyl viologen) is studied as a surrogate RAP for RFBs. For oxidized RAPs, ionic conductivity varies weakly between 1.6 and 2.1 S m −1 for RAP concentrations of 0.13–1.27 mol kg −1 (monomeric repeat unit per kg solvent) and 0.32 mol kg −1 LiBF 4 with a minor increase upon reduction. In contrast, viscosity varies between 1.8 and 184.0 mPa s over the same concentration range with weakly shear-thinning rheology independent of oxidation state. Techno-economic analysis is used to quantify reactor cost as a function of electrolyte transport properties for RAP concentrations of 0.13–1.27 mol kg −1 , assuming a hypothetical 3V cell and facile kinetics. Among these concentrations, reactor cost is minimized over a current density range of 600–1000 A m −2 with minimum reactor cost between $11–17 per kWh, and pumping pressures below 10 kPa. The predicted low reactor cost of RAP RFBs is enabled by sustained ionic mobility in spite of the high viscosity of concentrated RAP solutions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Electrocatalysts for Energy Conversion · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Redox flow batteries: a review10.1007/s10800-011-0348-2 ↗
2. The economics of large-scale wind power in a carbon constrained world10.1016/j.enpol.2004.06.007 ↗
3. Recent progress in redox flow battery research and development10.1002/adfm.201200694 ↗
4. Pathways to low-cost electrochemical energy storage: a comparison of aqueous and nonaqueous flow batteries10.1039/C4EE02158D ↗
5. An all-organic non-aqueous lithium-ion redox flow battery10.1002/aenm.201200322 ↗
6. Progress in flow battery research and development10.1149/1.3599565 ↗
7. Progress in redox flow batteries, remaining challenges and their applications in energy storage10.1039/c2ra21342g ↗
8. A review of current developments in non-aqueous redox flow batteries: characterization of their membranes for design perspective10.1039/c3ra00115f ↗
9. 1 kW/1 kWh advanced vanadium redox flow battery utilizing mixed acid electrolytes10.1016/j.jpowsour.2013.02.045 ↗
10. Battery separators10.1021/cr020738u ↗
11. Impact of redox-active polymer molecular weight on the electrochemical properties and transport across porous separators in nonaqueous solvents10.1021/ja508482e ↗
12. Nanofiltration ( NF ) membranes: the next generation separators for all vanadium redox flow batteries (VRBs)?10.1039/c1ee01117k ↗
13. Silica modified nanofiltration membranes with improved selectivity for redox flow battery application10.1039/C1EE02571F ↗
14. Redox active colloids as discrete energy storage carriers10.1021/jacs.6b06365 ↗
15. Impact of backbone tether length and structure on the electrochemical performance of viologen redox active polymers10.1021/acs.chemmater.6b02825 ↗
16. Scanning electrochemical microscopy and hydrodynamic voltammetry investigation of charge transfer mechanisms on redox active polymers10.1149/2.0021604jes ↗
17. Cost-driven materials selection criteria for redox flow battery electrolytes10.1016/j.jpowsour.2016.08.129 ↗
19. Fast ion transport in new lithium electrolytes gelled with PMMA. 1. Influence of polymer concentration10.1016/0167-2738(93)90032-X ↗
20. Fast ion transport in new lithium electrolytes gelled with PMMA. 2. Influence of lithium salt concentration10.1016/0167-2738(93)90033-Y ↗
21. Electrolytic characteristics of ethylene carbonate–diglyme-based electrolytes for lithium batteries10.1016/S0013-4686(99)00431-4 ↗
22. High performance redox flow batteries: an analysis of the upper performance limits of flow batteries using non-aqueous solvents10.1016/j.electacta.2017.03.132 ↗
23. Effects of molecular weight and concentration on flow properties of concentrated polymer solutions10.1002/polc.5070150134 ↗
24. The viscosity of polymers and their concentrated solutions
25. An aqueous, polymer-based redox-flow battery using non-corrosive, safe, and low-cost materials10.1038/nature15746 ↗
26. Synthesis and characterization of TEMPO- and viologen-polymers for water-based redox-flow batteries10.1039/C5PY01602A ↗
27. Ion and solvent diffusion and ion conduction of PC-DEC and PC-DME binary solvent electrolytes of LiN(SO2CF3)210.1016/j.electacta.2004.03.007 ↗
28. Capital cost sensitivity analysis of an all-vanadium redox-flow battery10.1149/2.041208jes ↗
29. Comparative analysis for various redox flow batteries chemistries using a cost performance model10.1016/j.jpowsour.2015.05.066 ↗
30. Cost and performance model for redox flow batteries10.1016/j.jpowsour.2012.12.023 ↗
31. Development and validation of chemistry agnostic flow battery cost performance model and application to nonaqueous electrolyte systems10.1002/er.3526 ↗
32. The influence of electrode and channel configurations on flow battery performance10.1149/2.0941409jes ↗
33. Vanadium redox battery: positive half-cell electrolyte studies10.1016/j.jpowsour.2008.12.113 ↗
34. Enhancing mass transport in redox flow batteries by tailoring flow field and electrode design10.1149/2.0231601jes ↗
35. Uncovering the role of flow rate in redox flow batteries: Simulations of reaction distributions with simultaneous mixing in tanks10.1016/j.electacta.2017.07.008 ↗
36. Component-cost and performance based comparison of flow and static batteries10.1016/j.jpowsour.2015.06.023 ↗
37. Through-plane conductivities of membranes for nonaqueous redox flow batteries10.1149/2.0901510jes ↗
38. 4-acetamido-2,2,6,6-tetramethylpiperidine-1-oxyl as a model organic redox active compound for nonaqueous flow batteries10.1016/j.jpowsour.2016.06.125 ↗
39. Wiley: Impedance Spectroscopy: Theory, Experiment, and Applications, 2nd Edition - Evgenij Barsoukov, J. Ross Macdonald. http://www.wiley.com/WileyCDA/WileyTitle/productCd-0471647497.html (accessed May 6, 2016).
40. An investigation of the ionic conductivity and species crossover of lithiated nafion 117 in nonaqueous electrolytes10.1149/2.03211601jes ↗
41. Electrochemistry of the viologens10.1039/cs9811000049 ↗
42. Oligorotaxane radicals under orders10.1021/acscentsci.5b00377 ↗
43. Biphasic electrode suspensions for Li-Ion semi-solid flow cells with high energy density, fast charge transport, and low-dissipation flow10.1002/aenm.201500535 ↗
44. Maximizing energetic efficiency in flow batteries utilizing non-Newtonian fluids10.1149/2.011404jes ↗
45. Quantifying tortuosity in porous Li-ion battery materials10.1016/j.jpowsour.2008.12.032 ↗
46. Electrolyte solvation and Ionic Association III. Acetonitrile-Lithium salt mixtures–transport properties10.1149/2.018308jes ↗
47. Conductivity and viscosity of PC-DEC and PC-EC solutions of LiPF610.1149/1.1566019 ↗
48. Gel electrolyte for solid-state electrochromic cell10.1149/1.2069512 ↗
49. The viscosity of dilute solutions of long-chain molecules. IV. Dependence on concentration10.1021/ja01263a056 ↗
50. An equation suitable for describing the viscosity of dilute to moderately concentrated polymer solutions10.1016/0032-3861(79)90226-X ↗
51. Polymer chain dimensions and the dependence of viscoelastic properties on concentration, molecular weight and solvent power10.1016/0032-3861(80)90266-9 ↗
52. Conformation and rheological properties of calf-thymus DNA in solution10.3390/polym8020051 ↗
53. Possible scaling relations for semidilute polyelectrolyte solutions10.1021/ma60070a028 ↗
54. Concentration and shear rate dependence of viscosity in random coil polysaccharide solutions10.1016/0144-8617(81)90011-4 ↗
55. Seidel · 2008
56. Parameters affecting the intrinsic viscosity
57. Ionic liquids: ion mobilities, glass temperatures, and fragilities10.1021/jp0275894 ↗
58. Physicochemical and electrochemical properties of ionic liquids containing aprotic heterocyclic anions doped with lithium salts10.1149/2.116309jes ↗
59. Effect of structure on transport properties (viscosity, ionic conductivity, and self-diffusion coefficient) of aprotic heterocyclic anion (AHA) room temperature ionic liquids. 2. Variation of alkyl chain length in the phosphonium cation10.1021/acs.jpcb.6b03934 ↗
60. Über organische Lösungs-und Ionisierungsmittel. II. Teil: Messungen der elektrischen Leitfähigkeit
61. Complexation of Li+, Na+ and K+ ions by [222], [222D], [221], [221D] cryptands in acetonitrile at 25 °C: conductometric determination of the true thermodynamic formation constants10.1023/A:1008053018475 ↗
62. Selective formation of integrated stacks of (α-diimine)(ethylenediamine)platinum( II ) and neutral π systems of the phenanthrene type10.1039/b007292n ↗
63. BF4− as a probe for ion pair solution structure using interionic one- and two-dimensional 19F{1H} NOEs10.1002/(SICI)1097-458X(200002)38:2<90::AID-MRC608>3.0.CO;2-P ↗
64. Ion-conducting polymer electrolytes10.1080/13642818908208454 ↗
65. Darcy · 1856 · vol. 647
66. Transport property requirements for flow battery separators10.1149/2.0051601jes ↗
67. Scale-up of high power density redox flow batteries by introducing interdigitated flow fields10.1016/j.icheatmasstransfer.2016.03.021 ↗
68. Influence of architecture and material properties on vanadium redox flow battery performance10.1016/j.jpowsour.2015.09.095 ↗