journal article·2016-02

Predicting heat generation in a lithium-ion pouch cell through thermography and the lumped capacitance model

S.J. Bazinski, X. Wang

Publisher page

Abstract

Abstract A technique is developed that combines a new closed-form analytical form of the lumped capacitance model (LCM) and thermography to predict the internal heat generation of a lithium-ion pouch cell. A series of tests is conducted to validate the new technique using a polyimide film heater mounted as a vertical plate in front of an infrared camera. A programmable power supply is used to subject the heater to three types of pre-defined heat profiles. The technique performs very well in reconstructing each known heat profile. The technique is then used to predict the rate of heat generation of a 14.5 Ah lithium iron phosphate cell under different rates of discharge. Compared to the heat rate measured by a calorimeter, the model predicts an average heat rate within 10% for moderate C-rates and lower. For C-rates higher than 2C, a simple correction algorithm is applied due to cell temperature gradients becoming more pronounced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Bandhauer · J. Electrochem. Soc. · 2011 · 15810.1149/1.3515880 ↗
2. Al Hallaj · J. Electrochem. Soc. · 2000 · 147 · 243210.1149/1.1393549 ↗
3. Hong · J. Electrochem. Soc. · 1998 · 145 · 148910.1149/1.1838509 ↗
4. Kobayashi · J. Power Sources · 1999 · 81–82 · 46310.1016/S0378-7753(99)00203-7 ↗
5. Kobayashi · J. Electrochem. Soc. · 2002 · 149 · A97810.1149/1.1487833 ↗
6. Vaidyanathan · J. Power Sources · 2001 · 93 · 11210.1016/S0378-7753(00)00550-4 ↗
7. Kanamura · J. Electroanal. Chem. · 1992 · 333 · 12710.1016/0022-0728(92)80386-I ↗
8. Press · 1994
9. 3D thermal analysis of Li-ion battery cells with various geometries and cooling conditions using abaqus
10. http://www.dupont.com/content/dam/assets/products-and-services/membranes-films/assets/DEC-Kapton-MT-datasheet.pdf.
11. M. N. Ozisik, Heat Conduction, John Wiley & Sons, second ed., ISBN0-471-53256-8.
12. F. P. Incropera and D. P. DeWitt, Introduction to Heat Transfer, Wiley & Sons, third ed., ISBN 0-471-30458-1, p.455.
13. Lewandowski · Wärme Stoffübertragung · 1983 · 17 · 14710.1007/BF02570524 ↗
14. Lewandowski · Wärme Stoffübertragung · 1984 · 18 · 24710.1007/BF01007137 ↗
15. Lewandowski · Int. J. Heat Mass Transf. · 2014 · 78 · 123210.1016/j.ijheatmasstransfer.2014.07.024 ↗
16. Bazinski · J. Power Sources · 2015 · 293 · 28310.1016/j.jpowsour.2015.05.084 ↗
17. J.R. Taylor, An Introduction to Error Analysis: the Study of Uncertainties in Physical Measurements, second ed., University Science Books ISBN 978-0-935702-42-2.