journal article·2010-03

Experimental investigation of 1kW solid oxide fuel cell system with a natural gas reformer and an exhaust gas burner

Tzu-Hsiang Yen, Wen-Tang Hong, Wei-Ping Huang, Yu-Ching Tsai, Hung-Yu Wang, Cheng-Nan Huang, Chien-Hsiung Lee

Journal of Power Sources· Volume 195· Issue 5
Publisher page

Abstract

Abstract An experimental investigation is performed to establish the optimal operating conditions of a porous media after-burner integrated with a 1 kW solid oxide fuel cell (SOFC) system fed by a natural gas reformer. The compositions of the anode off-gas and cathode off-gas emitted by the SOFC when operating with fuel utilizations in the range 0–0.6 are predicted using commercial GCTool software. The numerical results are then used to set the compositions of the anode off-gas and cathode off-gas in a series of experiments designed to clarify the effects of the fuel utilization, cathode off-gas temperature and excess air ratio on the temperature distribution within the after-burner. The experimental results show that the optimal after-burner operation is obtained when using an anode off-gas temperature of 650 °C, a cathode off-gas temperature of 390 °C, a flame barrier temperature of 700 °C, an excess air ratio of 2 and a fuel utilization of U f = 0.6. It is shown that under these conditions, the after-burner can operate in a long-term, continuous fashion without the need for either cooling air or any additional fuel other than that provided by the anode off-gas.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Appleby · 1989
2. Stanley · 1982
3. Larminie · 2000
4. Santangelo · Applied Thermal Engineering · 2007 · 27 · 127810.1016/j.applthermaleng.2006.11.002 ↗
5. Chung · Energy & Fuels · 2007 · 21 · 31410.1021/ef0602574 ↗
6. Chung · Applied Thermal Engineering · 2008 · 28 · 93310.1016/j.applthermaleng.2007.07.002 ↗
7. Finnerty · Journal of Power Sources · 2000 · 86 · 45910.1016/S0378-7753(99)00496-6 ↗
8. Chan · Journal of Power Sources · 2002 · 103 · 18810.1016/S0378-7753(01)00842-4 ↗
9. Fontell · 2005
10. Chachuat · Chemical Engineering Science · 2005 · 60 · 453510.1016/j.ces.2005.02.053 ↗
11. Moessbauer · 1999
12. Babkin · Combustion and Flame · 1991 · 87 · 18210.1016/0010-2180(91)90168-B ↗
13. Howell · Progress in Energy and Combustion Science · 1996 · 22 · 12110.1016/0360-1285(96)00001-9 ↗
14. Trimis · Combustion Science and Technology · 1996 · 121 · 15310.1080/00102209608935592 ↗
15. Delalic · Experimental Thermal and Fluid Science · 2004 · 28 · 18510.1016/S0894-1777(03)00038-4 ↗
16. Liu · Combustion and Flame · 2004 · 138 · 29510.1016/j.combustflame.2004.06.003 ↗
17. Yen · 2008
18. GCTool, version 2.4, ANL Argonne IL (2001).