Effect of gas diffusion layer modulus and land–groove geometry on membrane stresses in proton exchange membrane fuel cells
Source abstract
Abstract
Abstract The electrical functionality of PEM fuel cells is facilitated by minimizing the contact resistances between different materials in the fuel cell, which is achieved via compressive clamping. The effect of the gas diffusion layer (GDL) modulus on the in-plane stress in the membrane after clamping is studied via numerical simulations, including both isotropic and anisotropic GDL properties. Furthermore, the effect of cell width and land–groove width ratio on the in-plane stress in the membrane subjected to a single hygro-thermal cycle is investigated for aligned and alternating gas channel geometries. The results from varying the GDL properties suggest that the in-plane stress in the membrane after clamping is due to a non-linear and coupled interaction of GDL and membrane deformation. The results of the geometric studies indicate that when the gas channels are aligned, the cell width and land–groove width ratio affect the in-plane stress distribution, but do not significantly affect the stress magnitudes. However, when the gas channels are alternating, the cell width and land–groove width ratio have significant effect on the membrane in-plane stresses. The effect of land–groove geometry is qualitatively verified by a series of experimental compression tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Cleghorn · 2003
2. Crum · ECS Transactions · 2006 · 3 · 54110.1149/1.2356175 ↗
3. Endoh · Electrochemical and Solid State Letters · 2004 · 7 · A20910.1149/1.1739314 ↗
4. Kundu · Journal of Power Sources · 2006 · 157 · 65010.1016/j.jpowsour.2005.12.027 ↗
5. Liu · Journal of New Materials for Electrochemical Systems · 2001 · 4 · 227
6. Sethuraman · Journal of the Electrochemical Society · 2008 · 155 · B11910.1149/1.2806798 ↗
7. Lai · 2005 · 161
8. Kusoglu · Journal of Power Sources · 2006 · 161 · 98710.1016/j.jpowsour.2006.05.020 ↗
9. Mathias · Electrochemical Society Interface · 2005 · 14 · 2410.1149/2.F05053IF ↗
10. Tang · Journal of Fuel Cell Science and Technology · 2006 · 3 · 11910.1115/1.2173666 ↗
11. Webber · AIChE Journal · 2004 · 50 · 321510.1002/aic.10230 ↗
12. Kusoglu · Journal of Power Sources · 2007 · 170 · 34510.1016/j.jpowsour.2007.03.063 ↗
13. Zhou · Journal of Power Sources · 2009 · 192 · 54410.1016/j.jpowsour.2009.01.085 ↗
14. Lee · Journal of Power Sources · 1999 · 84 · 4510.1016/S0378-7753(99)00298-0 ↗
15. Ge · Journal of Power Sources · 2006 · 159 · 92210.1016/j.jpowsour.2005.11.069 ↗
16. Escribano · Journal of Power Sources · 2006 · 156 · 810.1016/j.jpowsour.2005.08.013 ↗
17. Zhou · Journal of Power Sources · 2007 · 170 · 9310.1016/j.jpowsour.2007.03.073 ↗
18. Shimpalee · International Journal of Hydrogen Energy · 2007 · 32 · 84210.1016/j.ijhydene.2006.11.032 ↗
19. Scholta · Journal of Power Sources · 2006 · 155 · 6610.1016/j.jpowsour.2005.05.099 ↗
20. Ahmed · Journal of Power Sources · 2006 · 162 · 32710.1016/j.jpowsour.2006.06.083 ↗
21. Lee · International Journal of Hydrogen Energy · 2008 · 33 · 569110.1016/j.ijhydene.2008.07.038 ↗
22. Kusoglu · ECS Transactions · 2008 · 16 · 55110.1149/1.2981890 ↗
23. Tang · Journal of Power Sources · 2008 · 175 · 81710.1016/j.jpowsour.2007.09.093 ↗
24. Springer · Journal of the Electrochemical Society · 1991 · 138 · 233410.1149/1.2085971 ↗
25. Thampan · Journal of the Electrochemical Society · 2000 · 147 · 324210.1149/1.1393890 ↗
26. Hill · 1950
27. SGL, Product Information for Sigracet GDL, SGL Carbon Group.
28. Kleemann · Journal of Power Sources · 2009 · 190 · 9210.1016/j.jpowsour.2008.09.026 ↗