Regulation of morphology evolution and Mn dissolution for ultra-long cycled spinel LiMn2O4 cathode materials by B-doping
Source abstract
Abstract
Electrochemical properties of spinel LiMn 2O 4 cathode material have been always suffered from Mn dissolution and Jahn-Teller distortion. Herein, various Ni/B dual-doped LiNi 0.08B xMn 1.92-xO 4 ( x = 0–0.15) with a truncated octahedral morphology are synthesized via a facile solid-state combustion. The effects of Ni/B co-doping on the morphology, crystal structure, Mn dissolution, Li + diffusion coefficient and activation energy are investigated. Due to the relatively high Ni–O and B–O bond energy than that of Mn–O bond, the structure stability of the LiMn 2O 4 is enhanced, whilst restraining the Jahn-Teller distortion. The LiNi 0.08Mn 1.92O 4 shows (111), (110) and (100) facets. In comparison, the B-doping endows the LiNi 0.08B xMn 1.92-xO 4 ( x ≥ 0.02) with (111) and (100) facets. This morphology evolution without (110) facets effectively inhibits the Mn dissolution. Owing to the synergistic merits of Ni/B dual-doping and unique truncated octahedron, the optimized LiNi 0.08B 0.06Mn 1.86O 4 delivers an initial discharge capacity of 113.9 mAh∙g −1 at 1C and maintains a durable cycling life up to 2000 cycles at 5C. Even at 20C, a capacity retention of 86.3% is still obtained after 2000 cycles. Furthermore, a capacity retention of 70.6% can be retained after 500 cycles at 5C and 55 °C. The truncated octahedral LiNi 0.08B xMn 1.92-xO 4 with excellent electrochemical performance will be a good candidate for developing long-life lithium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Evidence for anionic redox activity in a tridimensional-ordered Li-rich positive electrode β-Li2IrO310.1038/nmat4864 ↗
2. Enhancing the high rate capability and cycling stability of LiMn2O4 by coating of solid-state electrolyte LiNbO310.1021/am5056504 ↗
3. Ultrathin nanoribbons of in situ carbon-coated V3O7·H2O for high-energy and long-life Li-ion batteries: synthesis, electrochemical performance and charge-discharge behavior10.1021/acsami.7b01504 ↗
4. A new active Li-Mn-O compound for high energy density Li-ion batteries10.1038/nmat4479 ↗
5. Nb-doped and Al2O3+B2O3-coated granular secondary LiMn2O4 particles as cathode materials for lithium-ion batteries10.1039/C8RA09407A ↗
6. Single-crystalline LiMn2O4 nanotubes synthesized via template-engaged reaction as cathodes for high-power lithium ion batteries10.1002/adfm.201001448 ↗
7. Nanostructured LiMn2O4 composite as high-rate cathode for high performance aqueous Li-ion hybrid supercapacitors10.1016/j.jpowsour.2018.04.103 ↗
8. Effectively suppressing dissolution of manganese from spinel lithium manganate via a nanoscale surface-doping approach10.1038/ncomms6693 ↗
9. Lithium titanate epitaxial coating on spinel lithium manganese oxide surface for improving the performance of lithium storage capability10.1021/am504319y ↗
10. Double the capacity of manganese spinel for lithium-ion storage by suppression of cooperative Jahn-Teller distortion10.1002/aenm.202000363 ↗
11. Nano-TiO2 (B) coated LiMn2O4 as cathode materials for lithium-ion batteries at elevated temperatures10.1016/j.electacta.2015.01.024 ↗
12. High-performance LiNi0.5Mn1.5O4 spinel controlled by Mn3+ concentration and site disorder10.1002/adma.201104767 ↗
13. Synthesis and electrochemical characterizations of spinel LiMn1.94MO4 (M=Mn0.06, Mg0.06, Si0.06, (Mg0.03Si0.03)) compounds as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2015.02.049 ↗
14. Improving the performance of sulphur doped LiMn2O4 by carbon coating10.1016/j.jpowsour.2019.226725 ↗
15. Three-dimension hierarchical Al2O3 nanosheets wrapped LiMn2O4 with enhanced cycling stability as cathode material for lithium ion batteries10.1021/acsami.6b05640 ↗
16. Hierarchical LiMn2O4 hollow cubes with exposed {111} planes as high-power cathodes for lithium-ion batteries10.1021/acsami.6b06820 ↗
17. Polyhedral LiNi0.5Mn1.5O4 with excellent electrochemical properties for lithium-ion batteries10.1039/C4TA02371D ↗
18. A new three-volt spinel Li1+xMn1.5Ni0.5O4 for secondary lithium batteries10.1149/1.1836686 ↗
19. Huo. N. Dual-doping to suppress cracking in spinel LiMn2O4: a joint theoretical and experimental study10.1039/C5CP07182H ↗
20. Crystal structure and multicomponent effects in Li1+xMn2-xyAlyO4 cathode materials for Li-ion batteries10.1016/j.jpowsour.2014.03.120 ↗
21. Effect of oxygen deficiency reduction in Mg-doped Mn-spinel on its cell storage performance at high temperature10.1016/j.electacta.2006.02.025 ↗
22. Capacity fading with oxygen loss for manganese spinels upon cycling at elevated temperatures10.1016/j.jpowsour.2008.02.071 ↗
23. Facile flameless combustion synthesis of high-performance boron-doped LiMn2O4 cathode with a truncated octahedral10.1016/j.jallcom.2021.159912 ↗
24. Structural stability and superior electrochemical performance of Sc-doped LiMn2O4 spinel as cathode for lithium ion batteries10.1016/j.electacta.2019.01.174 ↗
25. Low-cost and eco-friendly synthesis of octahedral LiMn2O4 cathode material with excellent electrochemical performance10.1016/j.ceramint.2019.05.273 ↗
26. Facile synthesis of LiMn2O4 octahedral nanoparticles as cathode materials for high capacity lithium ion batteries with long cycle life10.1016/j.jpowsour.2014.12.082 ↗
27. Shape-controllable synthesis and electrochemical properties of nanostructured manganese oxides10.1021/jp070982v ↗
28. Structural and electrochemical properties of nanocrystalline LixMn2O4 thin film cathodes (x=1.0-1.4)10.1016/j.jpowsour.2005.08.056 ↗
29. A truncated manganese spinel cathode for excellent power and lifetime in lithium-ion batteries10.1021/nl303619s ↗
30. Transmission electron microscopy of shape-controlled nanocrystals and their assemblies10.1021/jp993593c ↗
31. Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage10.1039/C4TA06522K ↗
32. Crystal structural design of exposed planes: express channels, high-rate capability cathodes for lithium-ion batteries10.1039/C8NR04842H ↗
33. Truncated octahedral LiMn2O4 cathode for high-performance lithium-ion batteries10.1016/j.matchemphys.2015.03.052 ↗
34. High-rate and long-life performance of a truncated spinel cathode material with off-stoichiometric composition at elevated temperature10.1016/j.electacta.2016.12.096 ↗
35. J. Morphological evolution of high-voltage spinel LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries: the critical effects of surface orientations and particle size10.1021/acsami.5b11389 ↗
36. Enhancing high-rate and elevated-temperature properties of Ni-Mg co-doped LiMn2O4 cathodes for Li-ion batteries10.1016/j.jcis.2019.07.078 ↗
37. Facile synthesis of truncated octahedron LiNi0.10Mn1.90O4 for high-performance Li-ion batteries10.1016/j.ceramint.2020.02.250 ↗
38. Surface-orientation for boosting the high-rate and cyclability of spinel LiNi0.02Mn1.98O4 cathode material10.1016/j.vacuum.2020.109505 ↗
39. Thermodynamic stability of low-and high-index spinel LiMn2O4 surface terminations10.1021/acsami.6b01069 ↗
40. Preparation and electrochemical properties of nanocrystalline LiBxMn2−xO4 cathode particles for Li-ion batteries by ultrasonic spray pyrolysis method10.1016/j.jallcom.2014.09.098 ↗
41. Solid-state combustion synthesis of spinel LiMn2O4 using glucose as a fuel10.1016/j.ceramint.2012.11.068 ↗
42. A truncated octahedral spinel LiMn2O4 as high-performance cathode material for ultrafast and long-life lithium-ion batteries10.1016/j.jpowsour.2017.04.079 ↗
43. Enhanced lithium transport by control of crystal orientation in spinel LiMn2O4 thin film cathodes
44. On the drastically improved performance of Fe-doped LiMn2O4 nanoparticles prepared by a facile solution-gelation route10.1016/j.electacta.2015.08.123 ↗
45. Electrochemical evaluation of LiAl0.05Ni0.05Mn1.9O4 cathode material synthesized via electrospinning method10.1016/j.jallcom.2015.01.163 ↗
46. Crumpled Ti3C2Tx (MXene) nanosheet encapsulated LiMn2O4 for high performance lithium-ion batteries10.1016/j.electacta.2019.04.094 ↗
47. Performance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries10.1039/C5EE03573B ↗
48. Investigations into capacity fading as a result of a Jahn-Teller distortion in 4V LiMn2O4 thin film electrodes10.1016/j.electacta.2004.01.071 ↗
49. The improved performance of spinel LiMn2O4 cathode with micro-nanostructured sphere-interconnected-tube morphology and surface orientation at extreme conditions for lithium-ion batteries10.1016/j.electacta.2020.136901 ↗