journal article·2021-08

Site-oriented design of spinel MgxNiMn2-xO4-δ as cathode material of intermediate-temperature direct ammonia solid oxide fuel cell

Fulan Zhong, Cheng Han, Yu Luo, Chen Zhou, Chongqi Chen, Li Lin, Guohui Cai, Lilong Jiang

Publisher page

Abstract

Abstract Ammonia is a carbon-free hydrogen carrier with high volumetric energy density, mature infrastructure, as well as easy and safe storage. In this work, we design a good cathode material based on spinel NiMn2O4 with an oriented structure for direct ammonia solid oxide fuel cell (DA-SOFC) at intermediate temperature (IT). We use an Mg-doped strategy at A-site to induce Ni2+ to occupy B-site and convert Mn3+ to Mn2+ or Mn4+, forming a disordered but stable MgxNiMn2-xO4-δ oxide according to the crystal field theory. The rich Mn2+/Mn3+/Mn4+ pairs over Mg xNiMn2-xO4 oxides create as many surface oxygen vacancies as possible, and serve as hopping sites for hole conduction to boost the interfacial transportion. Owing to richer oxygen vacancy and matchable thermal expansion, Mg0.4NiMn1.6O4 (MNMO(0.4)) shows higher compatibility with SOFC than others. An anode-supported Ni-YSZ|YSZ|MNMO(0.4)-YSZ SOFC can obtain a peak power density as high as 202 mW cm−2 at 600 °C in the DA-SOFC mode, 91% of that in the H2–SOFC mode. Compared with the commercial LSM-based one, the MNMO(0.4)-based DA-SOFC exhibits 27% higher electrochemical performance. The MNMO(0.4)-based DA-SOFC can continuously operate at 0.5 V and 800 °C for more than 50 h without remarkable degradation, revealing a promising cathode material of DA-SOFCs in IT-ranges.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The production of pure pressurised hydrogen by the reformer-steam iron process in a fixed bed reactor system10.1016/j.jpowsour.2015.01.052 ↗
2. Design and operation of an aluminium alloy tank using doped Na3AlH6 in kg scale for hydrogen storage10.1016/j.jpowsour.2016.05.102 ↗
3. Comparative study on ammonia oxidation over Ni-based cermet anodes for solid oxide fuel cells10.1016/j.jpowsour.2015.11.085 ↗
4. Coupling ammonia catalytic decomposition and electrochemical oxidation for solid oxide fuel cells: a model based on elementary reaction kinetics10.1016/j.jpowsour.2019.03.064 ↗
5. A novel coral-shaped Dy2O3 gas sensor for high sensitivity NH3 detection at room temperature10.1016/j.snb.2017.08.117 ↗
6. Progress in low-temperature solid oxide fuel cells with hydrocarbon fuels10.1016/j.cej.2020.126235 ↗
7. Effective promotion of oxygen reduction activity by rare earth doping in simple perovskite cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2019.227360 ↗
8. Highly stable Sr-free cobaltite-based perovskite cathodes directly assembled on a barrier-layer-free Y2O3 -ZrO2 electrolyte of solid oxide fuel cells10.1002/cssc.201601645 ↗
9. Effect of Sr content and strain on Sr surface segregation of La1-xSrxCo0.2Fe0.8O3−δ as cathode material for solid oxide fuel cells10.1021/acsami.6b07118 ↗
10. A high-performance, nanostructured Ba0.5Sr0.5Co0.8Fe0.2O3-d cathode for solid-oxide fuel cells10.1002/aenm.201100042 ↗
11. Thermal and electrochemical properties of PrBa0.5Sr0.5Co2-xFexO5+δ (x = 0.5, 1.0, 1.5) cathode materials for solid-oxide fuel cells10.1016/j.jpowsour.2013.01.064 ↗
12. Functionally graded bismuth oxide/zirconia bilayer electrolytes for high-performance intermediate-temperature solid oxide fuel cells (IT-SOFCs)10.1021/acsami.6b16660 ↗
13. Spinels: controlled preparation, oxygen reduction/evolution reaction application, and beyond10.1021/acs.chemrev.7b00051 ↗
14. Materials development for intermediate-temperature solid oxide electrochemical devices10.1007/s10853-011-6213-1 ↗
15. Development of Cu1.3Mn1.7O4 spinel coating on ferritic stainless steel for solid oxide fuel cell interconnects10.1016/j.jpowsour.2014.10.017 ↗
16. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
17. Electrochemical performance evaluation of FeCo2O4 spinel composite cathode for solid oxide fuel cells10.1016/j.jallcom.2020.154493 ↗
18. High performance cobalt-free Cu1.4Mn1.6O4 spinel oxide as an intermediate temperature solid oxide fuel cell cathode10.1016/j.jpowsour.2016.03.046 ↗
19. Electrochemical properties of Ni0.4Zn0.6Fe2O4 and the heterostructure composites (Ni–Zn ferrite-SDC) for low temperature solid oxide fuel cell (LT-SOFC)10.1016/j.electacta.2019.135349 ↗
20. Co9S8-Ni3S2/CuMn2O4-NiMn2O4 and MnFe2O4-ZnFe2O4/graphene as binder-free cathode and anode materials for high energy density supercapacitors10.1016/j.cej.2019.122640 ↗
21. Novel binder-free electrode of NiCo2O4@NiMn2O4 core-shell arrays modified carbon fabric for enhanced electrochemical properties10.1016/j.ceramint.2019.05.235 ↗
22. NiMnO3/NiMn2O4 oxides synthesized via the Aid of Pollen: ilmenite/spinel hybrid nanoparticles for highly efficient bifunctional oxygen electrocatalysis10.1021/acsami.6b08101 ↗
23. Ni/NiM2O4 (M = Mn or Fe) supported on N-doped carbon nanotubes as trifunctional electrocatalysts for ORR, OER and HER10.1039/C8CY02504E ↗
24. Highly porous, low band-gap NixMn3−xO4 (0.55 ≤ x ≤ 1.2) spinel nanoparticles with in situ coated carbon as advanced cathode materials for zinc-ion batteries10.1039/C9TA05101E ↗
25. Cation distribution and g factors of certain spinels containing Ni++, Mn++, Co++, Al+++, Ga+++, and Fe+++10.1063/1.1740465 ↗
26. Cation distribution in Ni-Mn-O spinel system for the application of IR sensors10.1016/j.proeng.2016.11.447 ↗
27. Facile synthesis of reduced graphene oxide/NiMn2O4 nanorods hybrid materials for high-performance supercapacitors10.1016/j.electacta.2017.02.023 ↗
28. Synthesis of NiMn2O4 thin films via a simple solid-state reaction route10.1016/j.ceramint.2020.01.198 ↗
29. Unveiling ionic diffusion in MgNiMnO4 cathode material for Mg-ion batteries via combined computational and experimental studies10.1007/s10008-019-04401-7 ↗
30. A bi-layered composite cathode of La0.8Sr0.2MnO3-YSZ and La0.8Sr0.2MnO3-La0.4Ce0.6O1.8 for IT-SOFCs10.1016/j.electacta.2008.01.095 ↗
31. Improved thermal expansion and electrochemical performance of La1−xSrxFe0.7Ni0.3O3−δ cathodes for intermediate-temperature SOFCs10.1016/j.solidstatesciences.2020.106356 ↗
32. Evaluation of calcium co-doping in double perovskite PrBaCo2O5+δ as cathode material for IT-SOFCs10.1016/j.electacta.2020.137274 ↗
33. Improved phase stability and CO2 poisoning robustness of Y-doped Ba0.5Sr0.5Co0.8Fe0.2O3−δ SOFC cathodes at intermediate temperatures10.1021/acsaem.8b00028 ↗
34. Nanointegrated, high-performing cobalt-free bismuth-based composite cathode for low-temperature solid oxide fuel cells10.1021/acsami.8b08911 ↗
35. Effects of calcium doping to oxygen reduction activity on Pr2-xCaxNiMnO6 cathode10.1016/j.jallcom.2018.11.046 ↗
36. Unreliability of simultaneously determining kchem and Dchem via conductivity relaxation for surface-modified La0.6Sr0.4Co0.2Fe0.8O3−δ10.1016/j.ssi.2010.08.006 ↗
37. Chemical bulk diffusion and electrochemical properties of SmBa0.6Sr0.4Co2O5+δ cathode for intermediate solid oxide fuel cells10.1016/j.ijhydene.2014.06.134 ↗
38. Modeling of oxygen reduction mechanism for 3PB and 2PB pathways at solid oxide fuel cell cathode from multi-step charge transfer10.1016/j.jpowsour.2011.11.002 ↗
39. Promotion effect of metal nanoparticle on surface exchange reaction of (La,Sr)MnO3 film with different orientation10.1149/2.1101706jes ↗
40. A novel cobalt-free double-perovskite NdBaFe1.9Nb0.1O5+δ cathode material for proton-conducting IT-SOFC10.1016/j.ceramint.2015.03.326 ↗
41. Catalytic activity of infiltrated La0.3Sr0.7Ti0.3Fe0.7O3−CeO2 as a composite SOFC anode material for H2 and CO oxidation10.1016/j.ijhydene.2017.05.016 ↗
42. Cathode reaction mechanism of porous-structured Sm0.5Sr0.5CoO3−δ and Sm0.5Sr0.5CoO3−δ/Sm0.2Ce0.8O1.9 for solid oxide fuel cells10.1016/j.jpowsour.2009.03.071 ↗
43. Structural and impedance analysis of copper doped LSM cathode for IT-SOFCs10.1016/j.jallcom.2013.01.002 ↗
44. Preparation of LSM–YSZ composite powder for anode of solid oxide electrolysis cell and its activation mechanism10.1016/j.jpowsour.2008.12.132 ↗