Facile synthesis of hierarchical porous Na3V2(PO4)3/C composites with high-performance Na storage properties
Source abstract
Abstract
Abstract Porous Na3V2(PO4)3/C composites were prepared in situ via a simple solution method using various amounts of cetyltrimethylammonium bromide and glycine mixtures. Platelet particles with a thickness of ~150 nm were formed when 0.4 mmol cetyltrimethylammonium bromide and 0.4 mmol glycine were used, resulting in a high specific surface area (16 m2 g−1) and porosity (0.05 cm3 g−1) of the composites. In addition, the porous Na3V2(PO4)3/C composites presented good reversible cyclic voltammetry peaks with low hysteresis and delivered a high specific discharge capacity of 113 mA h g−1, which decreased to 99 mA h g−1 (capacity retention of 88.1%) after 200 cycles at the current rate of 1 C. The high rate capability (96 mA h g−1 at 10 C) of the composites was attributed to their unique foamy microstructure, plate-like particles, and high electronic conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. A review of renewable energy sources, sustainability issues and climate change mitigation10.1080/23311916.2016.1167990 ↗
2. Towards sustainable energy: a systematic review of renewable energy sources, technologies, and public opinions10.1109/ACCESS.2019.2906402 ↗
3. Chrysanthemum flower-like NiCo2O4–nitrogen doped graphene oxide composite: an efficient electrocatalyst for lithium–oxygen and zinc–air batteries10.1039/C7CC03826G ↗
4. A review on the drawbacks of renewable energy as a promising energy source of the future10.1007/s13369-012-0436-6 ↗
5. The influence of Co3V2O8 morphology on the oxygen evolution reaction activity and stability10.1016/j.elecom.2015.12.012 ↗
6. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
7. Electrical energy storage for the grid: A Battery of Choices
8. Challenges for rechargeable batteries10.1016/j.jpowsour.2010.11.074 ↗
9. Brief history of early lithium-battery development10.3390/ma13081884 ↗
10. LiVPO4F@C particles anchored on boron-doped graphene sheets with outstanding Li+ storage performance for high-voltage Li-ion battery10.1016/j.ssi.2018.12.010 ↗
11. A three-dimensional LiVPO4F@C/MWCNTs/rGO composite with enhanced performance for high rate Li-ion batteries10.1016/j.electacta.2018.09.142 ↗
12. Eutectic synthesis of the P2-type NaxFe1/2Mn1/2O2 cathode with improved cell design for sodium-ion batteries10.1021/acsami.0c04513 ↗
13. Kundu · The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage · 2015 · 54 · 3431
14. Stable high-temperature cycling of Na metal batteries on Na3V2(PO4)3 and Na2FeP2O7 cathodes in NaFSI-rich organic ionic plastic crystal electrolytes10.1021/acs.jpclett.0c00149 ↗
15. Sodium-ion battery anodes: status and future trends
16. Pseudocapacitive charge storage properties of Na2/3Co2/3Mn2/9Ni1/9O2 in Na-ion batteries10.1016/j.electacta.2018.04.150 ↗
17. Ni0.5TiOPO4 phosphate: sodium insertion mechanism and electrochemical performance in sodium-ion batteries10.1016/j.jpowsour.2019.02.038 ↗
18. Understanding the redox process upon electrochemical cycling of the P2-Na0.78Co1/2Mn1/3Ni1/6O2 electrode material for sodium-ion batteries10.1038/s42004-020-0257-6 ↗
19. Research development on sodium-ion batteries10.1021/cr500192f ↗
20. A cost and resource analysis of sodium-ion batteries10.1038/natrevmats.2018.13 ↗
21. Sodium and sodium-ion batteries: 50 Years of research10.1002/aenm.201703137 ↗
22. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
23. Higher energy and safer sodium ion batteries via an electrochemically made disordered Na3V2(PO4)2F3 material10.1038/s41467-019-08359-y ↗
24. Porous Na3V2(PO4)3/C nanoplates for high-performance sodium storage10.1016/j.jcis.2018.12.071 ↗
25. Electrochemical studies on symmetric solid-state Na-ion full cell using Na3V2(PO4)3 electrodes and polymer composite electrolyte10.1016/j.jpowsour.2020.227954 ↗
26. Insights into the structural effects of layered cathode materials for high voltage sodium-ion batteries10.1039/C7EE00827A ↗
27. Challenges in developing electrodes, electrolytes, and diagnostics tools to understand and advance sodium-ion batteries10.1002/aenm.201702403 ↗
28. Mechanisms and performances of Na1.5Fe0.5Ti1.5(PO4)3/C composite as electrode material for Na-ion batteries10.1021/acs.jpcc.5b07931 ↗
29. Effects of nitrogen doping on the structure and performance of carbon coated Na3V2(PO4)3 cathodes for sodium-ion batteries10.1016/j.carbon.2017.08.063 ↗
30. Na3V2(PO4)3: an advanced cathode for sodium-ion batteries10.1039/C8NR09391A ↗
31. NASICON vs. Na metal: a new counter electrode to evaluate electrodes for Na secondary batteries10.1039/C9TA09036C ↗
32. Progress and prospect for NASICON-type Na3V2(PO4)3 for electrochemical energy storage10.1016/j.jechem.2018.05.001 ↗
33. NASICON-structured materials for energy storage10.1002/adma.201601925 ↗
34. Double-carbon coated Na3V2(PO4)3 as a superior cathode material for Na-ion batteries10.1016/j.apsusc.2019.05.224 ↗
35. Phosphorus-doped graphene-improved Na3V2(PO4)3@C nanocomposite possessing high-rate performance for electrochemical energy storage10.1016/j.ceramint.2019.03.031 ↗
36. Na3V2(PO4)3 nanoparticles confined in functional carbon framework towards high-rate and ultralong-life sodium storage10.1016/j.jallcom.2019.03.346 ↗
37. Construction of 3D pomegranate-like Na3V2(PO4)3/conducting carbon composites for high-power sodium-ion batteries10.1039/C7TA00153C ↗
38. The rate of reduction of vanadium pentoxide in concentrated acid solutions. Reduction of vanadium pentoxide by arsenious acid, oxalic acid, formaldehyde and ethyl alcohol10.1021/ja01258a063 ↗
39. Reduction of vanadium(v) by oxalic acid in aqueous acid solutions10.1039/b103320b ↗
40. Thermal degradation of CTAB in as-synthesized MCM-4110.1007/s10973-008-9055-6 ↗
41. A solution synthesis of Na3V2(PO4)3 cathode for sodium storage by using CTAB additive10.1016/j.ssi.2020.115269 ↗
42. Chemical reaction characteristics, structural transformation and electrochemical performances of new cathode LiVPO4F/C synthesized by a novel one-step method for lithium ion batteries10.1039/C8RA00370J ↗
43. Improvement in electrochemical performance of Na3V2(PO4)3/C cathode material for sodium-ion batteries by K-Ca co-doping10.1016/j.electacta.2018.05.174 ↗
44. NASICON-type Na3V2(PO4)310.1107/S1600536810002801 ↗
45. Na3V2(PO4)3 nanoparticles encapsulated in carbon nanofibers with excellent Na+ storage for sodium-ion batteries10.1016/j.ssi.2018.09.016 ↗
46. Structural characteristics of cerium oxide nanocrystals prepared by the microemulsion method10.1021/cm010235p ↗
47. CTAB-assisted synthesis of monoclinic BiVO4 photocatalyst and its highly efficient degradation of organic dye under visible-light irradiation10.1016/j.jhazmat.2009.08.068 ↗
48. CTAB cationic surfactant assisted synthesis of CoFe2O4 magnetic nanoparticles10.1016/j.ceramint.2016.09.101 ↗
49. CTAB-assisted sol-microwave method for fast synthesis of mesoporous TiO2 photocatalysts for photocatalytic conversion of glucose to value-added sugars10.1016/j.materresbull.2017.08.016 ↗
50. Effect of starting solution acidity on the characteristics of CoFe2O4 powders prepared by solution combustion synthesis10.1016/j.jmmm.2016.10.073 ↗
51. Sing · 2008
52. Highly reversible Na storage in Na3V2(PO4)3 by optimizing nanostructure and rational surface engineering10.1002/aenm.201800068 ↗
53. An efficient sodium-ion battery consisting of reduced graphene oxide bonded Na3V2(PO4)3 in a composite carbon network10.1016/j.jallcom.2018.07.082 ↗
54. Extending the cycle life of Na3V2(PO4)3 cathodes in sodium-ion batteries through interdigitated carbon scaffolding10.1039/C6TA05030A ↗
55. Investigating the influence of sodium sources towards improved Na3V2 (PO4)3 cathode of sodium-ion batteries10.1016/j.jallcom.2019.152430 ↗
56. Compared investigation of carbon-decorated Na3V2(PO4)3 with saccharides of different molecular weights as cathode of sodium ion batteries10.1016/j.electacta.2018.08.052 ↗
57. Na3V2(PO4)3@C core–shell nanocomposites for rechargeable sodium-ion batteries10.1039/C4TA00106K ↗
58. Ultrafine Na3V2(PO4)3@C nanoparticles embedded in boron-doped graphene as high-rate and long cycle-life cathode material for sodium-ion batteries10.1016/j.ssi.2018.05.023 ↗
59. Improved electrochemical performance of the Na3V2(PO4)3 cathode by B-doping of the carbon coating layer for sodium-ion batteries10.1039/C5TA03519H ↗
60. Glucose-assisted synthesis of Na3V2(PO4)3/C composite as an electrode material for high-performance sodium-ion batteries10.1016/j.jpowsour.2014.04.054 ↗
61. Electrochemical insertion properties of the novel lithium vanadium fluorophosphate, LiVPO4F10.1149/1.1609998 ↗
62. Long-term cycling studies on 4V-cathode, lithium vanadium fluorophosphate10.1016/j.jpowsour.2010.03.032 ↗
63. Redox-active metal-centered oxalato phosphate open framework cathode materials for lithium ion batteries10.1002/anie.201200210 ↗
64. A layered oxalatophosphate framework as a cathode material for Li-ion batteries10.1039/c3ta10464h ↗
65. Room temperature large-scale synthesis of layered frameworks as low-cost 4V cathode materials for lithium ion batteries10.1038/srep16270 ↗
66. Synthesis and electrochemical investigation of novel phosphite based layered cathodes for Li-ion batteries10.1039/C5RA12410G ↗
67. Synthesis and electrochemical studies of layer-structured metastable alpha I-LiVOPO410.1039/c2jm00062h ↗
68. LixNi0.7Co0.3O2 electrode material: structural, physical and electrochemical investigations10.1016/j.electacta.2008.02.072 ↗
69. On the LiNi0.2Mn0.2Co0.6O2 positive electrode material10.1016/j.jpowsour.2009.09.026 ↗
70. Comparative issues of cathode materials for Li-ion batteries10.3390/inorganics2010132 ↗
71. Synthesis, structure, and magnetic properties of [Li(H2O)M(N2H3CO2)(3)]center dot 0.5H(2)O (M = Co,Ni) as single precursors to LiMO2 battery materials10.1021/cm0523891 ↗
72. Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe2−xVx(PO4)(SO4)210.1016/j.jpowsour.2020.228417 ↗
73. Wei · 2019
74. In-situ constructing Na3V2(PO4)2F3/carbon nanocubes for fast ion diffusion with high-performance Na+-storage10.1016/j.cej.2019.123952 ↗
75. Selective sodium-ion diffusion channels in Na2-xFe3(PO4)3 positive electrode for Na-ion batteries10.1016/j.ensm.2019.07.040 ↗