Multicomponent design of Fe3O4 nanosheet-based binder-free anodes with a special substrate for supercapacitors
Source abstract
Abstract
Abstract Magnetite (Fe3O4) is a promising anode material for supercapacitors with aqueous alkaline electrolytes, whereas its sluggish kinetics and poor cycling stability are still challenges for practical applications. In this work, we design a Fe3O4 nanosheet-based binder-free anode derived from bicomponent Fe3O4–Fe nanosheets. The Fe3O4–Fe nanosheets are grown on a special stainless steel by an electrochemical method. Coated with graphene oxide, the Fe3O4–Fe nanosheets are subjected to electrochemical activation, through which the Fe3O4–Fe nanosheets and the surface of the special stainless steel are simultaneously oxidized into Fe3O4, and thus an integrated electrode with sufficient active sites for non-insertion charge storage is obtained. The graphene oxide is reduced to electrochemically reduced graphene oxide at the same time. When used as a binder-free anode in KOH solutions, the Fe3O4 nanohseets@electrochemically reduced graphene oxide electrode demonstrates pseudocapacitive behavior with a high capacitance (442.0 F g−1 at 3 A g−1), superior rate capability (430.9 F g−1 at 30 A g−1), and excellent cycling stability (98.9% retention after 25000 cycles). The asymmetric supercapacitor assembled with the Fe3O4 electrode exhibits a high energy density and good cycling stability. These results suggest the high potential of the rationally designed Fe3O4 nanosheet-based electrode as an integrated anode for supercapacitors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
2. Reversible hybrid sodium-CO2 batteries with low charging voltage and long-life10.1016/j.nanoen.2019.104318 ↗
3. Where do batteries end and supercapacitors begin?10.1126/science.1249625 ↗
4. Materials for electrochemical capacitors10.1038/nmat2297 ↗
5. Fabrication of flexible microsupercapacitors with binder-free ZIF-8 derived carbon films via electrophoretic deposition10.1246/bcsj.20190298 ↗
6. Bimetallic metal-organic frameworks for controlled catalytic graphitization of nanoporous carbons10.1038/srep30295 ↗
7. Designing carbon based supercapacitors with high energy density: a summary of recent progress10.1002/chem.201705555 ↗
8. Self-assembly of nickel phosphate-based nanotubes into two-dimensional crumpled sheet-like architectures for high-performance asymmetric supercapacitors10.1016/j.nanoen.2019.104270 ↗
9. Synthesis of electro-deposited ordered mesoporous RuOx using lyotropic liquid crystal and application toward micro-supercapacitors10.1016/j.jpowsour.2012.11.032 ↗
10. Boosting the cycling stability of transition metal compounds-based supercapacitors10.1016/j.ensm.2018.09.007 ↗
11. Electrochemical growth of α-MnO2 on carbon fibers for high-performance binder-free electrodes of supercapacitors10.1007/s10800-017-1142-6 ↗
12. Redox-driven route for widening voltage window in asymmetric supercapacitor10.1021/acsnano.8b04040 ↗
13. FeOx-based materials for electrochemical energy storage10.1002/advs.201700986 ↗
14. Conformal multifunctional titania shell on iron oxide nanorod conversion electrode enables high stability exceeding 30 000 cycles in aqueous electrolyte10.1002/adfm.201800497 ↗
15. In situ encapsulated Fe3O4 nanosheet arrays with graphene layers as an anode for high-performance asymmetric supercapacitors10.1039/C7TA07628B ↗
16. Flexible solid-state supercapacitor based on carbon nanotube/Fe3O4/reduced graphene oxide binary films
17. Fabrication of a ternary PANI@Fe3O4@CFs nanocomposite as a high performance electrode for solid-state supercapacitors10.1016/j.ijhydene.2019.08.184 ↗
18. Progress and development of Fe3O4 electrodes for supercapacitors10.1039/C6TA02582J ↗
19. Membrane MnO2 coated Fe3O4/CNTs negative material for efficient full-pseudocapacitance supercapacitor10.1016/j.matlet.2019.126589 ↗
20. Design of carbon/metal oxide hybrids for electrochemical energy storage10.1002/chem.201800772 ↗
21. Iron-based supercapacitor electrodes: advances and challenges10.1002/aenm.201601053 ↗
22. Fe2O3/reduced graphene oxide/Fe3O4 composite in situ grown on Fe foil for high-performance supercapacitors10.1021/acsami.6b09594 ↗
23. Fe3O4/carbon nanofibres with necklace architecture for enhanced electrochemical energy storage10.1039/C5TA02210J ↗
24. Fe3O4@carbon nanosheets for all-solid-state supercapacitor electrodes10.1021/acsami.6b05415 ↗
25. Morphology and phase changes in iron anodes affecting their capacity and stability in rechargeable alkaline batteries10.1021/acsenergylett.8b00063 ↗
26. 2D sandwich-like sheets of iron oxide grown on graphene as high energy anode material for supercapacitors10.1002/adma.201103042 ↗
27. Synergistic interaction between pseudocapacitive Fe3O4 nanoparticles and highly porous silicon carbide for high-performance electrodes as electrochemical supercapacitors10.1088/1361-6528/aa6812 ↗
28. Ultrathin supercapacitor electrodes with high volumetric capacitance and stability using direct covalent-bonding between pseudocapacitive nanoparticles and conducting materials10.1016/j.nanoen.2015.01.002 ↗
29. Pseudocapacitive oxide materials for high-rate electrochemical energy storage10.1039/c3ee44164d ↗
30. Supercapacitance behavior of porous oxide layer grown on 302 type stainless steel substrate10.1016/j.jpowsour.2013.02.054 ↗
31. The in situ synthesis of Fe(OH)3 film on Fe foam as efficient anode of alkaline supercapacitor based on a promising Fe3+/Fe0 energy storage mechanism10.1002/ppsc.201700484 ↗
32. A negative working potential supercapacitor electrode consisting of a continuous nanoporous Fe-Ni network10.1039/C6NR02363K ↗
33. Preparation of graphene by pressurized oxidation and multiplex reduction and its polymer nanocomposites by masterbatch-based melt blending10.1039/c2jm16203b ↗
34. Preparation and electrochemical properties of NiMnO3@NiO nanosheets for pseudocapacitors10.1016/j.jallcom.2020.154936 ↗
35. Three-phase PANI@nano-Fe3O4@CFs heterostructure: fabrication, characterization and investigation of microwave absorption and EMI shielding of PANI@nano-Fe3O4@CFs/epoxy hybrid composite10.1016/j.compscitech.2017.07.010 ↗
36. Room-temperature synthesis of Fe3O4/Fe-carbon nanocomposites with Fe-carbon double conductive network as supercapacitor10.1016/j.electacta.2016.08.139 ↗
37. Simultaneous formation of nanoscale zero-valent iron and degradation of nitrobenzene in wastewater in an impinging stream-rotating packed bed reactor10.1016/j.cej.2017.03.141 ↗
38. Improvement in magnetic and microwave absorption properties of nano-Fe3O4@CFs composites using a modified multi-step EPD process10.1016/j.apsusc.2017.05.207 ↗
39. In situ growth of monodisperse Fe3O4 nanoparticles on graphene as flexible paper for supercapacitor10.1039/C4TA01442A ↗
40. Electrochemical deposition of Fe3O4 nanoparticles and flower-like hierarchical porous nanoflakes on 3D Cu-cone arrays for rechargeable lithium battery anodes10.1016/j.matdes.2017.02.080 ↗
41. The chemical and structural analysis of graphene oxide with different degrees of oxidation10.1016/j.carbon.2012.10.013 ↗
42. Fabrication of Fe3O4 nanotube arrays for high-performance non-enzymatic detection of glucose10.1016/j.jelechem.2017.02.007 ↗
43. Realizing an asymmetric supercapacitor employing carbon nanotubes anchored to Mn3O4 cathode and Fe3O4 anode10.1021/acsami.8b16639 ↗
44. XPS analysis of oleylamine/oleic acid capped Fe3O4 nanoparticles as a function of temperature10.1016/j.apsusc.2014.02.006 ↗
45. Probing the thermal deoxygenation of graphene oxide using high-resolution in situ X-ray-based spectroscopies10.1021/jp203741y ↗
46. Effect of extended polymer chains on properties of transparent graphene nanosheets conductive film10.1039/c1jm13790e ↗
47. Impact of the degree of functionalization of graphene oxide on the electrochemical charge storage property and metal ion adsorption10.1039/C4RA08862J ↗
48. Kinetics and mechanistic aspects of the oxygen evolution reaction at hydrous iron oxide films in base10.1149/2.015303jes ↗
49. Fe3O4 nanoparticles grown on graphene as advanced electrode materials for supercapacitors10.1016/j.jpowsour.2013.06.035 ↗
50. Definitions of pseudocapacitive materials: a brief review10.1002/eem2.12028 ↗
51. Ultrahigh-rate wire-shaped supercapacitor based on graphene fiber10.1016/j.carbon.2017.04.052 ↗
52. Redox switching and oxygen evolution at oxidized metal and metal oxide electrodes: iron in base10.1039/c1cp22470k ↗
53. Electrochemically reduced graphene oxide/carbon nanotubes composites as binder-free supercapacitor electrodes10.1016/j.jpowsour.2016.02.016 ↗
54. Hierarchical carbon-decorated Fe3O4 on hollow CuO nanotube array: fabrication and used as negative material for ultrahigh-energy density hybrid supercapacitor10.1016/j.cej.2018.05.120 ↗
55. Highly dispersed Fe3O4 nanosheets on one-dimensional carbon nanofibers: synthesis, formation mechanism, and electrochemical performance as supercapacitor electrode materials10.1039/c1nr10972c ↗
56. Low-cost high-performance asymmetric supercapacitors based on Co2AlO4@MnO2 nanosheets and Fe3O4 nanoflakes10.1039/C5TA09914E ↗
57. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
58. Electrochemical study of pseudocapacitive behavior of Ti3C2Tx MXene material in aqueous electrolytes10.1016/j.ensm.2018.12.017 ↗
59. High-energy asymmetric electrochemical capacitors based on oxides functionalized hollow carbon fibers electrodes10.1016/j.nanoen.2016.09.023 ↗
60. Amorphous nanostructured FeOOH and Co-Ni double hydroxides for high-performance aqueous asymmetric supercapacitors10.1016/j.nanoen.2015.12.029 ↗
61. Multishelled NiO hollow microspheres for high-performance supercapacitors with ultrahigh energy density and robust cycle life10.1038/srep33241 ↗
62. Electrochemical deposition of honeycomb magnetite on partially exfoliated graphite as anode for capacitive applications10.1016/j.jpowsour.2017.05.055 ↗
63. Synthesis and application of NiMnO3-rGO nanocomposites as electrode materials for hybrid energy storage devices10.1016/j.apsusc.2018.02.165 ↗
64. Substrate integrated nickel-iron ultrabattery with extraordinarily enhanced performances10.1021/acsenergylett.6b00067 ↗
65. Hierarchical structures of nickel, cobalt-based nanosheets and iron oxyhydroxide nanorods arrays for electrochemical capacitors10.1016/j.electacta.2015.02.076 ↗
66. Hierarchical MnCo-layered double hydroxides@Ni(OH)2 core–shell heterostructures as advanced electrodes for supercapacitors10.1039/C6TA07842G ↗