Superior electrochemical performance of TiO2 sodium-ion battery anodes in diglyme-based electrolyte solution
Source abstract
Abstract
Abstract Sodium-ion batteries are considered a promising alternative to lithium-ion batteries due to its low cost and potential applications for large-scale energy storage. In this work, we focus on improving the Na-ion storage electrochemical performance of TiO2 anodes by using diglyme-based electrolyte solutions. Significantly better performances are observed for the first time in diglyme-based electrolyte solution, as compared to conventional carbonate electrolyte solutions with and without additives such as fluoroethylene carbonate (FEC) and vinylene (VC). The best TiO2 electrode demonstrated a high specific capacity of 248 mA h g−1 at 25 mA g−1 current density, ∼100% coulombic efficiency, superior pseudocapacitive Na-ion storage, and good capacity retention on extended galvanostatic charge-discharge cycles. A full-cell assembled with TiO2 anode, Na3V2(PO4)3 cathode and NaPF6-diglyme electrolyte solution demonstrated an energy density as high as 440 W h kg−1. Superior electrochemical performance of TiO2 anodes in diglyme-based electrolyte is credited to the enhanced passivation and Na-ion conducting properties of polyether-based solid electrolyte interfaces (SEI) compared to polycarbonate-based counterparts. Carbon coating also resulted in the reduced decomposition of both diglyme and carbonate based electrolyte solutions. These results potentially encourage the use of ether-based electrolyte solutions for further improving the electrochemical performance and commercialization of rechargeable Na-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
3. Chemically bonded TiO2-bronze nanosheet/reduced graphene oxide hybrid for high-power lithium ion batteries10.1021/nn405534r ↗
4. Challenges for rechargeable batteries10.1016/j.jpowsour.2010.11.074 ↗
5. Lithium batteries and cathode materials10.1021/cr020731c ↗
6. Advancement of technology towards developing Na-ion batteries10.1016/j.jpowsour.2017.12.053 ↗
7. High capacity Na-storage and superior cyclability of nanocomposite Sb/C anode for Na-ion batteries10.1039/c2cc32730a ↗
8. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
9. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
10. Resource constraints on the battery energy storage potential for grid and transportation applications10.1016/j.jpowsour.2010.08.056 ↗
11. Research development on sodium-ion batteries10.1021/cr500192f ↗
12. A 3.8-V earth-abundant sodium battery electrode10.1038/ncomms5358 ↗
13. Na-ion mobility in layered Na2FePO4F and olivine Na [Fe,Mn]PO410.1039/c3ee40914g ↗
14. beta-NaMnO2: a high-performance cathode for sodium-ion batteries10.1021/ja509704t ↗
15. Prussian blue: a new framework of electrode materials for sodium batteries10.1039/c2cc31777j ↗
16. High capacity and rate capability of amorphous phosphorus for sodium-ion batteries10.1002/anie.201209689 ↗
17. Update on anode materials for Na-ion batteries10.1039/C5TA03181H ↗
18. Transition metal oxide thin films with improved reversibility as negative electrodes for sodium-ion batteries10.1016/j.elecom.2012.11.029 ↗
19. Self-organized sodium titanate/titania nanoforest for the negative electrode of sodium-ion microbatteries10.1016/j.jallcom.2015.06.183 ↗
20. High capacity Na-storage and superior cyclability of nanocomposite Sb/C anode for Na-ion batteries10.1039/c2cc32730a ↗
21. Electrochimica acta, embedding tin nanoparticles in micron-sized disordered carbon for lithium- and sodium-ion anodes10.1016/j.electacta.2013.09.007 ↗
22. Update on Na-based battery materials. A growing research path10.1039/c3ee41031e ↗
23. Amorphous TiO2 nanotube Anode for rechargeable sodium-ion batteries10.1021/jz2012066 ↗
24. Anatase titania nanorods as an intercalation anode material for rechargeable sodium batteries10.1021/nl402747x ↗
25. Nanocrystalline anatase TiO2: a new anode material for rechargeable sodium-ion batteries10.1039/c3cc45254a ↗
26. Graphene mediated improved sodium storage in nanocrystalline anatase TiO2 for sodium-ion batteries with ether electrolyte10.1039/C5CC09656A ↗
27. Sodium storage behavior of Na0.66Ni0.33˗xZnxMn0.67O2 (x = 0, 0.07 and 0.14) positive materials in diglyme-based electrolytes10.1016/j.jpowsour.2018.08.037 ↗
28. Unfolding the mechanism of sodium insertion in anatase TiO2 nanoparticles10.1002/aenm.201401142 ↗
29. Electrochemical sodium storage of TiO2(B) nanotubes for sodium-ion batteries10.1039/c3ra42413h ↗
30. N-doped rutile TiO2/C with significantly enhanced Na storage capacity for Na-ion batteries10.1016/j.electacta.2017.03.104 ↗
31. High cyclability of carbon-coated TiO2 nanoparticles as anode for sodium-ion batteries10.1016/j.electacta.2015.01.086 ↗
32. Highly ordered three-dimensional Ni-TiO2 nanoarrays as sodium-ion battery anodes10.1021/acs.chemmater.5b00633 ↗
33. Anatase TiO2 nanoparticles for high power sodium-ion anodes10.1016/j.jpowsour.2013.11.083 ↗
34. Na+ intercalation pseudocapacitance in graphene-coupled titanium oxide enabling ultra-fast sodium storage and long-term cycling10.1038/ncomms7929 ↗
35. Anatase titania nanorods as an intercalation anode material for rechargeable sodium batteries10.1021/nl402747x ↗
36. Alternative Li-ion battery electrode based on self-organized titania nanotubes10.1021/cm801670u ↗
37. Self-organized amorphous TiO2 nanotube arrays on porous Ti foam for rechargeable lithium and sodium-ion batteries10.1016/j.jpowsour.2012.09.019 ↗
38. Treasure Na-ion anode from trash coke by adept electrolyte selection10.1016/j.jpowsour.2017.02.065 ↗
39. On the reliability of sodium Co-intercalation in expanded graphite prepared by different methods as anodes for sodium-ion batteries10.1149/2.0211714jes ↗
40. Use of graphite as a highly reversible electrode with superior cycle life for sodium-ion batteries by making use of Co-intercalation phenomena10.1002/anie.201403734 ↗
41. Sodium storage behavior in natural graphite using ether-based electrolyte systems10.1002/adfm.201402984 ↗
42. Diglyme based electrolytes for sodium-ion batteries10.1021/acsaem.8b00360 ↗
43. NMR detected insights into the dynamics of sodium Co-intercalation with diglyme electrolyte into graphite anodes linked to prolonged cycling10.1021/acs.jpcc.8b06089 ↗
44. Rouquerol · 1999
45. Benefits of chromium substitution in Na3V2(PO4)3 as a potential candidate for sodium-ion batteries10.1002/celc.201500052 ↗
46. Nanosheet‐constructed porous TiO2–B for advanced lithium ion batteries10.1002/adma.201201036 ↗
47. Facile synthesis of carbon-mediated porous nanocrystallite anatase TiO2 for improved sodium insertion capabilities as an anode for sodium-ion batteries10.1016/j.jpowsour.2017.07.050 ↗
48. Ultrathin single-crystalline TiO2 nanosheets anchored on graphene to be hybrid network for high-rate and long cycle-life sodium battery electrode application10.1016/j.jpowsour.2016.12.077 ↗
49. Fabrication of porous Ag/TiO2/Au coatings with excellent multipactor suppression10.1038/srep43749 ↗
50. The thin carbon layer coated Ti3+-TiO2 nanocrystalline for visible-light driven photocatalysis10.1039/C5NR00032G ↗
51. Solid-gas phase photo-catalytic behaviour of rutile and TiOn (1 < n < 2) sub-oxide phases for self-cleaning applications materials10.3390/ma12010170 ↗
52. Effects of calcination temperature on the photocatalytic activity and photo-induced super-hydrophilicity of mesoporous TiO2 thin films10.1039/b200964a ↗
53. Highly ordered three-dimensional Ni-TiO2 nanoarrays as sodium-ion battery anodes10.1021/acs.chemmater.5b00633 ↗
54. Sn-doped TiO2 nanotubes as superior anode materials for sodium-ion batteries10.1039/C4CC10020D ↗
55. Design of nitrogen doped graphene grafted TiO2 hollow nanostructures with enhanced sodium storage performance10.1039/C4TA01789G ↗
56. Biphase-interface enhanced sodium storage and accelerated charge transfer: flower-like anatase/bronze TiO2/C as an advanced anode material for Na-ion batteries10.1021/acsami.7b13382 ↗
57. Electrochemical investigations on TiO2-B nanowires as a promising high capacity anode for sodium-ion batteries10.1016/j.electacta.2016.03.110 ↗
58. Non-aqueous electrolytes for sodium-ion batteries10.1039/C4TA04428B ↗
59. In search of an optimized electrolyte for Na-ion batteries10.1039/c2ee22258b ↗
60. Highly stable linear carbonate-containing electrolytes with fluoroethylene carbonate for high-performance cathodes in sodium-ion batteries10.1016/j.jpowsour.2016.04.070 ↗
61. Fluorinated ethylene carbonate as electrolyte additive for rechargeable Na batteries10.1021/am200973k ↗
62. High capacity hard carbon anodes for sodium-ion batteries in additive free electrolyte10.1016/j.elecom.2012.10.038 ↗
63. Templated nanocrystal-based porous TiO2 films for next-generation electrochemical capacitors10.1021/ja8057309 ↗
64. Synergistic effects of transition metal substitution in conversion electrodes for lithium-ion batteries10.1039/c0jm03880f ↗
65. Improved energy storage solution based on hybrid oxide materials10.1021/sc300096s ↗
66. Li+ ion insertion in TiO2 (anatase).2. Voltammetry on nanoporous films10.1021/jp970490q ↗
67. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
68. Effect of fluoroethylene carbonate (FEC) on the performance and surface chemistry of Si-nanowire Li-ion battery anodes10.1021/la203712s ↗
69. FT-IR analysis of molecular structure evolvement of poly(etherurethanes) in ozone atmosphere10.4028/www.scientific.net/AMR.742.215 ↗
70. Exceptional electrochemical performance of Si-nanowires in 1,3-dioxolane solutions: a surface chemical investigation10.1021/la300306v ↗
71. Explaining the enhanced photocatalytic activity of degussa P25 mixed-phase TiO2 using EPR10.1021/jp0273934 ↗
72. A fractal-like electrode based on double-wall nanotubes of anatase exhibiting improved electrochemical behaviour in both lithium and sodium batteries10.1039/C4CP04572F ↗
73. Chong · Appl. Phys. Lett. · 2008 · 92 · 23250210.1063/1.2944141 ↗
74. Self-Doped Ti3+ enhanced photocatalyst for hydrogen production under visible light10.1021/ja103843d ↗