Ethanol based fuel cell on paper support
Source abstract
Abstract
Abstract Easily disposable low cost fuel cells as power sources are environmentally benign alternates to batteries for powering micro-analytical systems. In this regard, for the first time, an ethanol-dichromate fuel-oxidant microfluidic fuel cell is implemented on a paper scaffold. In this cell, a proton conducting poly (4-styrenesulfonate) based gel electrolyte enables proton transport from the anode to the cathode. Hydrothermally synthesized molybdenum oxide nanorods catalyze dichromate reduction and ethanol oxidation at the respective electrodes. A peak power density of 6.32 mWcm−2 is achieved with the catalyst. However, the cell without catalyst delivers a maximum power density of only 2.74 mWcm−2. The compositions of the catholyte and anolyte streams and molybdenum oxide loadings are optimized. A stack of two cells connected in series illuminates a 3 mm red light emitting diode for over 40 min. This real time demonstration showcases the potential of this cell as an alternative to batteries for powering micro-analytical devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Fuel Cells and Related Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Low cost environmentally benign porous paper based fuel cells for micro-nano systems10.1149/2.0251514jes ↗
2. Instant power generation from an air-breathing paper and pencil based bacterial bio-fuel cell10.1039/C5LC00211G ↗
3. Turning the page: advancing paper-based microfluidics for broad diagnostic application10.1021/acs.chemrev.7b00024 ↗
4. Origami paper-based fluidic batteries for portable electrophoretic devices10.1039/C4LC00091A ↗
5. Paper-based membraneless hydrogen peroxide fuel cell prepared by micro-fabrication10.1016/j.jpowsour.2015.10.038 ↗
6. A paper based self-pumping and self-breathing fuel cell using pencil stroked graphite electrodes10.1039/C4LC00029C ↗
7. Paper-based microfluidic fuel cells
8. Sodium percarbonate based, mixed-media fuel cells supported on paper with gold/nickel oxide catalysts
9. An improved ethanol microfluidic fuel cell based on a PdAg/MWCNT catalyst synthesized by the reverse micelles method10.1016/j.fuel.2015.11.057 ↗
10. High performance of ethanol co-laminar flow fuel cells based on acrylic, paper and pd-nio as anodic catalyst10.1016/j.electacta.2016.05.002 ↗
11. Low catalyst loaded ethanol gas fuel cell sensor10.1016/j.snb.2016.04.108 ↗
12. Performance of carbon-supported palladium and palladium ruthenium catalysts for alkaline membrane direct ethanol fuel cells10.1016/j.ijhydene.2016.04.053 ↗
13. Synthesis of crystalline/amorphous core/shell MoO3 composites through a controlled dehydration route and their enhanced ethanol sensing properties10.1021/cg401384t ↗
14. Catalytic intervention of MoO3 toward ethanol oxidation on PtPd nanoparticles decorated MoO3-polypyrrole composite support10.1021/acsami.6b07455 ↗
15. Fast Synthesis of a -MoO3 Nanorods with controlled aspect ratios and their enhanced lithium storage capabilities10.1021/jp1017482 ↗
16. Hydrothermal synthesis of α-MoO3 and the influence of later heat treatment on its electrochemical properties10.1016/S1452-3981(23)13017-3 ↗
17. Døssland · 2012 · 85
18. Silver nanoparticles supported on tio 2 nanotubes as active catalysts for ethanol oxidation10.1016/j.jcat.2010.12.011 ↗
19. Electrocatalytic oxidation of ethanol at Pd/Ag nanodendrites prepared via low support electrodeposition and galvanic replacement10.1039/c3ta10706j ↗
20. A paper-based microbial fuel cell: instant battery for disposable diagnostic devices10.1016/j.bios.2013.06.001 ↗
21. Modeling sulfur poisoning of Ni-based anodes in solid oxide fuel cells10.1149/2.031403jes ↗