Experimental and modeling study of high performance direct carbon solid oxide fuel cell with in situ catalytic steam-carbon gasification reaction
Source abstract
Abstract
Abstract In this paper, 2D models for direct carbon solid oxide fuel cells (DC-SOFCs) with in situ catalytic steam-carbon gasification reaction are developed. The simulation results are found to be in good agreement with experimental data. The performance of DC-SOFCs with and without catalyst are compared at different operating potential, anode inlet gas flow rate and operating temperature. It is found that adding suitable catalyst can significantly speed up the in situ steam-carbon gasification reaction and improve the performance of DC-SOFC with H2O as gasification agent. The potential of syngas and electricity co-generation from the fuel cell is also evaluated, where the composition of H2 and CO in syngas can be adjusted by controlling the anode inlet gas flow rate. In addition, the performance DC-SOFCs and the percentage of fuel in the outlet gas are both increased with increasing operating temperature. At a reduced temperature (below 800 °C), good performance of DC-SOFC can still be obtained with in-situ catalytic carbon gasification by steam. The results of this study form a solid foundation to understand the important effect of catalyst and related operating conditions on H2O-assisted DC-SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
2. A high performance cathode for the next generation of solid oxide fuel cells10.1038/nature02863 ↗
3. Disruption of extended defects in solid oxide fuel cell anodes for methane oxidation10.1038/nature04438 ↗
4. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
5. Modeling of solid oxide fuel cells10.1007/s11434-016-1150-7 ↗
6. A high performance direct carbon solid oxide fuel cell fueled by Ca-loaded activated carbon10.1016/j.ijhydene.2017.03.229 ↗
7. A comprehensive review of direct carbon fuel cell technology10.1016/j.pecs.2012.01.003 ↗
8. Critical review of carbon conversion in “Carbon Fuel Cells”10.1021/cr400072b ↗
9. Challenges in developing direct carbon fuel cells10.1039/C6CS00784H ↗
10. A new carbon fuel cell with high power output by integrating with in situ catalytic reverse Boudouard reaction10.1016/j.elecom.2009.04.016 ↗
11. Effect of anode and Boudouard reaction catalysts on the performance of direct carbon solid oxide fuel cells10.1016/j.ijhydene.2010.07.068 ↗
12. Performance improvement of direct carbon fuel cell by introducing catalytic gasification process10.1016/j.jpowsour.2010.01.083 ↗
13. Investigation of anode configurations and fuel mixtures on the performance of direct carbon fuel cells (DCFCs)10.1016/j.jpowsour.2013.03.072 ↗
14. Structurally modified coal char as a fuel for solid oxide-based carbon fuel cells with improved performance10.1016/j.jpowsour.2015.04.121 ↗
15. Modeling of indirect carbon fuel cell systems with steam and dry gasification10.1016/j.jpowsour.2016.02.050 ↗
16. Modeling of direct carbon solid oxide fuel cells with H2O and CO2 as gasification agents10.1016/j.ijhydene.2017.05.075 ↗
17. K2CO3 catalyzed steam gasification of ash-free coal. studying the effect of temperature on carbon conversion and gas production rate using a drop-down reactor10.1016/j.fuel.2014.03.014 ↗
18. Modeling of an anode-supported Ni–YSZ|Ni–ScSZ|ScSZ|LSM–ScSZ multiple layers SOFC cell: Part I. experiments, model development and validation10.1016/j.jpowsour.2007.04.037 ↗
19. Elementary reaction modeling and experimental characterization of solid oxide fuel-assisted steam electrolysis cells10.1016/j.ijhydene.2014.05.018 ↗
20. Ceramic materials containing rare earth oxides for solid oxide fuel cell10.1016/S0925-8388(96)02629-1 ↗
21. The ionic conductivity, thermal expansion behavior, and chemical compatibility of La0.54Sr0.44Co0.2Fe0.8O3-δ as SOFC cathode material10.1016/j.solidstatesciences.2011.07.007 ↗
22. Structure and electrical properties of La1 − xSrxCo1 − yFeyO3. Part 2. the system La1 − xSrxCo0.2Fe0.8O310.1016/0167-2738(94)00245-N ↗
23. Kinetic studies of char gasification by steam and CO2 in the presence of H2 and CO10.1016/j.fuproc.2009.12.020 ↗
24. Modeling of SOFC running on partially pre-reformed gas mixture10.1016/j.ijhydene.2011.10.042 ↗
25. Modeling of direct carbon solid oxide fuel cell for CO and electricity cogeneration10.1016/j.apenergy.2016.06.064 ↗
26. Modeling of direct carbon-assisted Solid Oxide Electrolysis Cell (SOEC) for syngas production at two different electrodes10.1149/2.0041611jes ↗
27. Modeling of CH4-assisted SOEC for H2O/CO2 co-electrolysis10.1016/j.ijhydene.2016.10.026 ↗
28. Modelling of finger-like channelled anode support for SOFCs application10.1007/s11434-016-1131-x ↗
29. Performance comparison of Fick's, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode10.1016/S0378-7753(02)00724-3 ↗
30. An electrochemical model for syngas production by co-electrolysis of H2O and CO210.1016/j.jpowsour.2011.11.080 ↗
31. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling10.1016/S0378-7753(02)00277-X ↗