journal article·2016-06

Impact of compression on gas transport in non-woven gas diffusion layers of high temperature polymer electrolyte fuel cells

Dieter Froning, Junliang Yu, Gerd Gaiselmann, Uwe Reimer, Ingo Manke, Volker Schmidt, Werner Lehnert

Publisher page

Abstract

Abstract Gas transport in non-woven gas diffusion layers of a high-temperature polymer electrolyte fuel cell was calculated with the Lattice Boltzmann method. The underlying micro structure was taken from two sources. A real micro structure was analyzed in the synchrotron under the impact of a compression mask mimicking the channel/rib structure of a flow field. Furthermore a stochastic geometry model based on synchrotron X-ray tomography studies was applied. The effect of compression is included in the stochastic model. Gas transport in these micro structures was simulated and the impact of compression was analyzed. Fiber bundles overlaying the micro structure were identified which affect the homogeneity of the gas flow. There are significant deviations between the impact of compression on effective material properties for this type of gas diffusion layers and the Kozeny-Carman equation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (pem) fuel cells10.1016/j.energy.2008.04.015 ↗
2. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
3. Local structural characteristics of pore space in GDLs of PEM fuel cells based on geometric 3D graphs10.1149/1.3222737 ↗
4. Random geometric graphs for modelling the pore space of fibre-based materials10.1007/s10853-011-5754-7 ↗
5. Stochastic 3D modeling of fiber-based materials10.1016/j.commatsci.2012.02.038 ↗
6. Experimental characterization of in-plane permeability of gas diffusion layers10.1016/j.jpowsour.2006.07.058 ↗
7. Measurement of relative permeability of fuel cell diffusion media10.1016/j.jpowsour.2009.12.105 ↗
8. In-situ measurements of gdl effective permeability and under-land cross-flow in a pem fuel cell10.1016/j.ijhydene.2012.03.030 ↗
9. Heterogeneous through-plane distributions of tortuosity, effective diffusivity, and permeability for PEMFC GDLs10.1149/1.3524284 ↗
10. Single phase through-plane permeability of carbon paper gas diffusion layers10.1016/j.jpowsour.2011.11.084 ↗
11. A theoretical model to predict gas permeability for slip flow through a porous medium10.1016/j.applthermaleng.2014.04.071 ↗
12. Combined local current distribution measurements and high resolution neutron radiography of operating direct methanol fuel cells10.1016/j.elecom.2009.06.008 ↗
13. The influence of gas diffusion layer wettability on direct methanol fuel cell performance: a combined local current distribution and high resolution neutron radiography study10.1016/j.jpowsour.2010.02.057 ↗
14. Effect of cross-flow on pefc liquid-water distribution: an in-situ high-resolution neutron radiography study10.1016/j.jpowsour.2015.05.016 ↗
15. Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography10.1063/1.2731440 ↗
16. In-situ synchrotron X-ray radiography on high temperature polymer electrolyte fuel cells10.1016/j.elecom.2010.08.002 ↗
17. The effects of compression and gas diffusion layers on the performance of a PEM fuel cell10.1016/S0378-7753(99)00298-0 ↗
18. The effect of gas diffusion layer compression on gas bypass and water slug motion in parallel gas flow channels10.1002/aic.14686 ↗
19. Tortuous flow in porous media10.1103/PhysRevE.54.406 ↗
20. Tortuosity-porosity relation in porous media flow10.1103/PhysRevE.78.026306 ↗
21. Prediction of the permeability of fibrous media using the Lattice Boltzmann method in conjunction with coarse numerical lattices
22. Compress effects on porosity, gas-phase tortuosity, and gas permeability in a simulated pem gas diffusion layer10.1002/er.3348 ↗
23. Lattice Boltzmann simulation of water and gas flow in porous gas diffusion layers in fuel cells reconstructed from micro-tomography10.1016/j.camwa.2012.08.006 ↗
24. 3D phase-differentiated GDL microstructure generation with binder and PTFE distributions10.1016/j.ijhydene.2011.12.050 ↗
25. Stochastic 3D modeling of the GDL structure in PEMFCs based on thin section detection10.1149/1.2839570 ↗
26. 3D analysis, modeling and simulation of transport processes in compressed fibrous microstructures, using the Lattice Boltzmann method10.1016/j.electacta.2013.04.071 ↗
27. Effect of porosity heterogeneity on the permeability and tortuosity of gas diffusion layers in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2013.09.061 ↗
28. Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: evaluation of polymer binders in catalyst layer10.1016/j.ijhydene.2013.06.107 ↗
29. Effect of platinum distribution in dual catalyst layer structured gas diffusion electrode on the performance of high temperature PEMFC10.1149/2.077404jes ↗
30. Stochastic 3D modeling of non-woven materials with wet-proofing agent10.1016/j.ijhydene.2013.04.144 ↗
31. 3D microstructure modeling of compressed fiber-based materials10.1016/j.jpowsour.2014.01.095 ↗
32. A numerical study of structural change and anisotropic permeability in compressed carbon cloth polymer electrolyte fuel cell gas diffusion layers10.1002/fuce.201000037 ↗
33. A numerical investigation of the effects of gdl compression and intrusion in polymer electrolyte fuel cells (pefcs)10.1016/j.ijhydene.2011.04.154 ↗
34. Investigation of the effects of the anisotropy of gas-diffusion layers on heat and water transport in polymer electrolyte fuel cells10.1016/j.jpowsour.2009.01.103 ↗
35. Investigation of species transport in a gas diffusion layer of a polymer electrolyte membrane fuel cell through two-phase modelling10.1016/j.renene.2012.10.008 ↗
36. 3D multiphase modeling of PEMFC with uneven compression of GDL10.1149/1.3502357 ↗
37. Study of effective transport properties of fresh and aged gas diffusion layers10.1016/j.jpowsour.2015.03.132 ↗
38. Three-dimensional non-isothermal modeling of a phosphoric acid-doped polybenzimidazole (PBI) membrane fuel cell10.1016/j.ssi.2012.02.031 ↗
39. Numeric modeling and investigation of gas crossover effects in high temperature proton exchange membrane (PEM) fuel cells10.1016/j.ijhydene.2012.07.123 ↗
40. Performance analysis of HT-PEFC stacks10.1016/j.ijhydene.2012.02.190 ↗
41. 3D modeling of a 200 cm2 HT-PEFC short stack10.1016/j.ijhydene.2011.10.055 ↗
42. Effect of spiral flow field design on performance and durability of HT-PEFCs10.1149/2.116308jes ↗
43. Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging10.1016/j.jpowsour.2013.12.062 ↗
44. Extraction of curved fibers from 3D data10.5566/ias.v32.p57-63 ↗
45. Palabos, http://www.palabos.org/, Nov 14, 2012.
46. Succi · 2001
47. Hänel · 2004
48. Wolf-Gladrow · 2000
49. Stochastic aspects of mass transport in gas diffusion layers10.1007/s11242-014-0312-9 ↗
50. The importance of diffusion mechanisms in high temperature polymer electrolyte fuel cells10.1149/06917.1089ecst ↗
51. Mass transfer formulation for polymer electrolyte membrane fuel cell cathode10.1016/j.ijhydene.2015.05.074 ↗
52. Viscous permeability of random fiber structures: comparison of electrical and diffusional estimates with experimental and analytical results10.1177/0021998305046438 ↗
53. R Core Team, R · 2013