journal article·2010-10

A study on optimization of hybrid drive train using Advanced Vehicle Simulator (ADVISOR)

Adam Same, Alex Stipe, David Grossman, Jae Wan Park

Journal of Power Sources· Volume 195· Issue 19
Publisher page

Abstract

Abstract This study investigates the advantages and disadvantages of three hybrid drive train configurations: series, parallel, and “through-the-ground” parallel. Power flow simulations are conducted with the MATLAB/Simulink-based software ADVISOR. These simulations are then applied in an application for the UC Davis SAE Formula Hybrid vehicle. ADVISOR performs simulation calculations for vehicle position using a combined backward/forward method. These simulations are used to study how efficiency and agility are affected by the motor, fuel converter, and hybrid configuration. Three different vehicle models are developed to optimize the drive train of a vehicle for three stages of the SAE Formula Hybrid competition: autocross, endurance, and acceleration. Input cycles are created based on rough estimates of track geometry. The output from these ADVISOR simulations is a series of plots of velocity profile and energy storage State of Charge that provide a good estimate of how the Formula Hybrid vehicle will perform on the given course. The most noticeable discrepancy between the input cycle and the actual velocity profile of the vehicle occurs during deceleration. A weighted ranking system is developed to organize the simulation results and to determine the best drive train configuration for the Formula Hybrid vehicle. Results show that the through-the-ground parallel configuration with front-mounted motors achieves an optimal balance of efficiency, simplicity, and cost. ADVISOR is proven to be a useful tool for vehicle power train design for the SAE Formula Hybrid competition. This vehicle model based on ADVISOR simulation is applicable to various studies concerning performance and efficiency of hybrid drive trains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electric and Hybrid Vehicle Technologies · Vehicle emissions and performance · Vehicle Dynamics and Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Brown · J. Power Sources · 2008 · 183 · 27510.1016/j.jpowsour.2008.04.089 ↗
2. 2010 Formula Hybrid™ Rules, ©2009 SAE International, dated 26 August 2009. Available http://www.formula-hybrid.org/pdf/Formula-Hybrid-2010-Rules.pdf.
3. Wipke · IEEE Trans. Veh. Technol. · 1999 · 48 · 175110.1109/25.806767 ↗
4. Markel · J. Power Sources · 2002 · 110 · 25510.1016/S0378-7753(02)00189-1 ↗
5. Johnson · J. Power Sources · 2002 · 110 · 32110.1016/S0378-7753(02)00194-5 ↗
6. Myers · 2007
7. Sørensen · Int. J. Hydrogen Energy · 2007 · 32 · 159710.1016/j.ijhydene.2006.10.037 ↗
8. Wang · J. Southeast Univ. · 2006 · 22 · 196
9. Subaru Robin. Retrieved 17 February 2010, from Robinamerica.com: http://www.robinamerica.com/pspecsheet.aspx?pid=9.
10. 2008 Ninja 250R Sport. Retrieved 17 February 2010, from Kawasaki.com: http://www.kawasaki.com/PRODUCTS/product-specifications.aspx?id=263.
11. Specification sheet, Perm Motor PMG 132. Available http://www.perm-motor.de/site/pdf/Gleichstrommotoren_PMG/Technische_Daten/PMG_132_TD_Technische_Daten_und_Beschreibung_deutsch_02-08.pdf.
12. WarP 9 Motor. Retrieved 17 Feb 2010, from Go-Ev.com: http://www.go-ev.com/WarP.html#WarP_9.