journal article·2021-09

Superhydrophobic antibacterial wearable metallized fabric as supercapacitor, multifunctional sensors, and heater

Chanwoo Park, Taegun Kim, Edmund P. Samuel, Yong-Il Kim, Seongpil An, Sam S. Yoon

Publisher page

Abstract

Abstract Reduced graphene oxide (rGO), carbon nanotubes (CNTs), and copper nanoparticles were supersonically sprayed onto a fabric to yield a wearable energy storage device with multifunctional sensing capabilities. This wearable electronic device is superhydrophobic and antibacterial, demonstrating its suitability for smart sportswear, futuristic military uniforms, healthcare monitoring, human-machine interfaces, and intelligent soft robotics. Both rGO and the CNTs contribute to the double-layer capacitance properties, owing to the accumulation of electrostatic charges, whereas copper enhances the charge transfer and pseudocapacitance via redox reactions with the electrolyte. The fabric is bendable, stretchable, and durable with respect to external mechanical stress. Because of the supersonic impact during coating, the deposited materials adhere well to the fabric surface to retain the durable mechanical properties. The rGO/CNT/Cu-coated fabric produced thermal energy by Joule heating upon application of an electrical voltage. This metallized fabric is also capable of sensing the surrounding temperature and variations in the external strain. The antibacterial properties of the fabric ensure that harmful microorganisms are destroyed, potentially preventing the spread of disease. All of these unique properties of the metallized fabric make it suitable for use in future electronic textiles, which are useful for energy-storing, heating, sensing, water-repellent, and antiviral applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Electrospun Nanofibers in Biomedical Applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Simultaneous high sensitivity sensing of temperature and humidity with graphene woven fabrics10.1021/acsami.7b09184 ↗
2. Conductive fabric-based stretchable hybridized nanogenerator for scavenging biomechanical energy10.1021/acsnano.6b01170 ↗
3. Highly-efficient dendritic cable electrodes for flexible supercapacitive fabric10.1021/acsami.7b11263 ↗
4. Highly robust, transparent, and breathable epidermal electrode10.1021/acsnano.8b04245 ↗
5. High durability and waterproofing rGO/SWCNT-fabric-based multifunctional sensors for human-motion detection10.1021/acsami.7b15386 ↗
6. Wearable temperature sensor with tunable thermal index for healthcare monitoring10.1002/adhm.201800074 ↗
7. Graphene textile strain sensor with negative resistance variation for human motion detection10.1021/acsnano.8b03391 ↗
8. All paper-based flexible and wearable piezoresistive pressure sensor10.1021/acsami.9b07465 ↗
9. Stretchable conductive nonwoven fabrics with self-cleaning capability for tunable wearable strain sensor10.1016/j.nanoen.2019.104143 ↗
10. Highly sensitive wearable 3D piezoresistive pressure sensors based on graphene coated isotropic non-woven substrate10.1016/j.compositesa.2018.11.023 ↗
11. A stretchable, highly sensitive, and multimodal mechanical fabric sensor based on electrospun conductive nanofiber yarn for wearable electronics10.1002/admt.201800338 ↗
12. Highly sensitive, rugged, and wearable fabric strain sensor based on graphene clad polyester knitted elastic band for human motion monitoring10.1002/admi.201900409 ↗
13. Electrospun fibrous nanocomposites as permeable, flexible strain sensors10.1063/1.2885112 ↗
14. A stretchable strain-insensitive temperature sensor based on free-standing elastomeric composite fibers for on-body monitoring of skin temperature10.1021/acsami.8b19425 ↗
15. Based mechanical sensors enabled by folding and stacking10.1021/acsami.9b06071 ↗
16. Environmentally‐friendly and multifunctional graphene‐silk fabric strain sensor for human‐motion detection10.1002/admi.201901507 ↗
17. Nylon-graphene composite nonwovens as monolithic conductive or capacitive fabrics10.1021/acsami.7b00471 ↗
18. Highly surface-embossed polydimethylsiloxane-based triboelectric nanogenerators with hierarchically nanostructured conductive Ni–Cu fabrics10.1021/acsami.8b10613 ↗
19. Flexible all-solid planar fibrous cellulose nonwoven fabric-based supercapacitor via capillarity-assisted graphene/MnO2 assembly10.1016/j.jallcom.2018.12.254 ↗
20. Textile-like electrodes of seamless graphene/nanotubes for wearable and stretchable supercapacitors10.1016/j.jpowsour.2019.227355 ↗
21. Antibacterial activity of photocatalytic electrospun titania nanofiber mats and solution-blown soy protein nanofiber mats decorated with silver nanoparticles10.1016/j.catcom.2013.01.002 ↗
22. Yarin · 2014
23. ZnO/MnOx nanoflowers for high-performance supercapacitor electrodes10.1021/acssuschemeng.9b06796 ↗
24. Wearable fabric supercapacitors using supersonically sprayed reduced graphene and tin oxide
25. Fabrication of anchored copper oxide nanoparticles on graphene oxide nanosheets via an electrostatic coprecipitation and its application as supercapacitor10.1016/j.electacta.2012.10.088 ↗
26. Distinctive supercapacitive properties of copper and copper oxide nanocrystals sharing a similar colloidal synthetic route10.1002/aenm.201700105 ↗
27. Noble metal-based materials in high-performance supercapacitors10.1039/C6QI00199H ↗
28. Supersonically sprayed copper–nickel microparticles as flexible and printable thin‐film high‐temperature heaters10.1002/admi.201700075 ↗
29. Supersonically sprayed Fe2O3/C/CNT composites for highly stable Li-ion battery anodes10.1016/j.cej.2020.125018 ↗
30. Supersonic cold spraying for energy and environmental applications: one‐step scalable coating technology for advanced micro‐and nanotextured materials10.1002/adma.201905028 ↗
31. Optimization of supersonic nozzle flow for titanium dioxide thin-film coating by aerosol deposition10.1016/j.jaerosci.2011.07.006 ↗
32. Numerical studies on the effects of stagnation pressure and temperature on supersonic flow characteristics in cold spray applications10.1007/s11666-011-9641-1 ↗
33. Supersonic nozzle flow simulations for particle coating applications: effects of shockwaves, nozzle geometry, ambient pressure, and substrate location upon flow characteristics10.1007/s11666-010-9542-8 ↗
34. Thin film metallization by supersonic spraying of copper and nickel nanoparticles on a silicon substrate10.1016/j.commatsci.2015.06.016 ↗
35. Thin-film metallization of CuInGaSe2 nanoparticles by supersonic kinetic spraying10.1016/j.commatsci.2015.01.009 ↗
36. Copper/carbon hybrid nanozyme: tuning catalytic activity by the copper state for antibacterial therapy10.1021/acs.nanolett.9b02242 ↗
37. New insights on antimicrobial efficacy of copper surfaces in the healthcare environment: a systematic review10.1016/j.cmi.2018.03.034 ↗
38. Electrosprayed graphene decorated with ZnO nanoparticles for supercapacitors10.1016/j.jallcom.2017.12.320 ↗
39. Graphene/carbon nanotube/bacterial cellulose assisted supporting for polypyrrole towards flexible supercapacitor applications10.1016/j.jallcom.2018.10.376 ↗
40. Direct ink writing of wearable thermoresponsive supercapacitors with rGO/CNT composite electrodes10.1002/admt.201900691 ↗
41. Supersonically sprayed Zn2SnO4/SnO2/CNT nanocomposites for high-performance supercapacitor electrodes10.1021/acssuschemeng.9b02549 ↗
42. Synthesis, characterization and catalytic activity of Cu/Cu2O nanoparticles prepared in aqueous medium10.9767/bcrec.10.2.7984.169-174 ↗
43. Non-electrolytic synthesis of copper oxide/carbon nanocomposite by surface plasma in super-dehydrated ethanol10.1038/srep21178 ↗
44. Phytomediated generation of Ag, CuO and Ag-Cu nanoparticles for dimethoate sensing10.1016/j.jphotochem.2018.08.026 ↗
45. Investigations into the antibacterial behavior of copper nanoparticles against escherichia coli10.1007/s13213-010-0015-6 ↗
46. The influence of solvents and surfactants on the preparation of copper nanoparticles by a chemical reduction method10.1088/2043-6262/2/1/015009 ↗
47. Cu2O/CuO bilayered composite as a high-efficiency photocathode for photoelectrochemical hydrogen evolution reaction
48. Physical properties and enhanced photocatalytic activity of ZnO-rGO nanocomposites10.1007/s00339-020-03753-6 ↗
49. Synthesis of carbon nanotubes for oil-water interfacial tension reduction
50. Influence of edge defects on Raman spectra of graphene10.22226/2410-3535-2020-1-89-93 ↗
51. Self‐healing reduced graphene oxide films by supersonic kinetic spraying10.1002/adfm.201400732 ↗
52. Synthesis of Cu/rGO composites by chemical and thermal reduction of graphene oxide10.1016/j.jallcom.2019.06.008 ↗
53. Zeolitic imidazolate framework-7 textile-derived nanocomposite fibers as freestanding supercapacitor electrodes10.1016/j.jelechem.2018.01.012 ↗
54. The influence of copper addition on the electrical conductivity and charge transfer resistance of reduced graphene oxide (rGO)10.1039/C8NJ03614D ↗
55. Functionalized graphene oxide as an efficient adsorbent for CO 2 capture and support for heterogeneous catalysis10.1039/C6RA13590K ↗
56. An efficient copper-based magnetic nanocatalyst for the fixation of carbon dioxide at atmospheric pressure
57. Correlations between preparation methods, structural features and electrochemical Li-storage behavior of reduced graphene oxide10.1039/C7NR03348F ↗
58. “Butterfly effect” in CuO/graphene composite nanosheets: a small interfacial adjustment triggers big changes in electronic structure and Li-ion storage performance10.1021/am505186a ↗
59. Single-walled carbon nanotubes templated CuO networks for gas sensing10.1039/C6TC01722C ↗
60. The effect of scan rate on the precision of determining corrosion current by tafel extrapolation: a numerical study on the example of pure Cu in chloride containing medium10.1016/j.electacta.2019.04.064 ↗
61. 2 D amorphous frameworks of NiMoO4 for supercapacitors: defining the role of surface and bulk controlled diffusion processes10.1016/j.apsusc.2014.11.016 ↗
62. Minimizing the nyquist-plot semi-circle of pseudocapacitive manganese oxides through modification of the oxide-substrate interface resistance10.1016/j.jpowsour.2019.04.029 ↗
63. An impedance-based approach to predict the state-of-charge for carbon-based supercapacitors10.1016/j.mee.2008.02.016 ↗
64. Active carbon electrode fabricated via large-scale coating-transfer process for high-performance supercapacitor10.1007/s00339-017-1069-0 ↗
65. Wearable, stretchable, transparent all-in-one soft sensor formed from supersonically sprayed silver nanowires10.1021/acsami.9b12847 ↗
66. Transparent body-attachable multifunctional pressure, thermal, and proximity sensor and heater
67. Review of flexible temperature sensing networks for wearable physiological monitoring10.1002/adhm.201601371 ↗
68. Weft‐knitted fabric for a highly stretchable and low‐voltage wearable heater10.1002/aelm.201700193 ↗
69. Surface strain redistribution on structured microfibers to enhance sensitivity of fiber‐shaped stretchable strain sensors10.1002/adma.201704229 ↗
70. In situ hydrothermal growth of Cu NPs on knitted fabrics through polydopamine templates for heating and sensing10.1016/j.cej.2019.123036 ↗
71. Enhancing the sensitivity of percolative graphene films for flexible and transparent pressure sensor arrays10.1002/adfm.201503674 ↗
72. Ultrasensitive, stretchable strain sensors based on fragmented carbon nanotube papers10.1021/acsami.6b15195 ↗
73. Time evolution of the wettability of supported graphene under ambient air exposure10.1021/acs.jpcc.5b10492 ↗
74. A comprehensive review on wettability, desalination, and purification using graphene-based materials at water interfaces10.1016/j.cattod.2017.04.027 ↗
75. Persistent bacterial infections: the interface of the pathogen and the host immune system10.1038/nrmicro955 ↗
76. Pathogenic escherichia coli10.1038/nrmicro818 ↗
77. Staphylococcus aureus infections: epidemiology, pathophysiology, clinical manifestations, and management10.1128/CMR.00134-14 ↗
78. Understanding the pathway of antibacterial activity of copper oxide nanoparticles10.1039/C4RA12163E ↗
79. Stacked multilayers of alternating reduced graphene oxide and carbon nanotubes for planar supercapacitors10.1039/c3nr04339h ↗
80. Three‐dimensional MoS2@ CNT/RGO network composites for high‐performance flexible supercapacitors10.1002/chem.201605465 ↗
81. Electrochemical characteristics of flexible micro supercapacitors with reduced graphene oxide-carbon nanotubes composite electrodes10.1016/j.spmi.2018.04.014 ↗
82. Atmospheric-pressure-plasma-jet processed carbon nanotube (CNT)–reduced graphene oxide (rGO) nanocomposites for gel-electrolyte supercapacitors10.1039/C7RA12108C ↗
83. Knitted strain sensor textiles of highly conductive all-polymeric fibers10.1021/acsami.5b04892 ↗
84. Large-scale production of highly stretchable CNT/cotton/spandex composite yarn for wearable applications10.1021/acsami.8b11885 ↗
85. Polyurethane/cotton/carbon nanotubes core-spun yarn as high reliability stretchable strain sensor for human motion detection10.1021/acsami.6b08207 ↗
86. A stretchable carbon nanotube strain sensor for human-motion detection10.1038/nnano.2011.36 ↗
87. Study on the grafting of chitosan–gelatin microcapsules onto cotton fabrics and its antibacterial effect10.1016/j.colsurfb.2013.03.040 ↗
88. Construction of durable antibacterial and anti-mildew cotton fabric based on P (DMDAAC-AGE)/Ag/ZnO composites10.1016/j.carbpol.2018.09.087 ↗