Phase field modeling of microstructure evolution and concomitant effective conductivity change in solid oxide fuel cell electrodes
Source abstract
Abstract
Abstract Microstructure evolution plays an important role in the performance degradation of SOFC electrodes. In this work, we propose a much improved phase field model to simulate the microstructure evolution in the electrodes of solid oxide fuel cell. We demonstrate that the tunability of the interfacial energy in this model has been significantly enhanced. Parameters are set to fit for the interfacial energies of a typical Ni-YSZ anode, an LSM-YSZ cathode and an artificial reference electrode, respectively. The contact angles at various triple junctions and the microstructure evolutions in two dimensions are calibrated to verify the model. As a demonstration of the capabilities of the model, three dimensional microstructure evolutions are simulated applying the model to the three different electrodes. The time evolutions of grain size and triple phase boundary density are analyzed. In addition, a recently proposed bound charge successive approximation algorithm is employed to calculate the effective conductivity of the electrodes during microstructure evolution. The effective conductivity of all electrodes are found to decrease during the microstructure evolution, which is attributed to the increased tortuosity and the loss of percolated volume fraction of the electrode phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
2. Design and optimization of a combined fuel reforming and solid oxide fuel cell system with anode off-gas recycling10.1016/j.enconman.2011.05.009 ↗
3. Solid oxide fuel cells for power generation
4. Application of solid oxide fuel cell technology for power generation–a review10.1016/j.rser.2012.11.031 ↗
5. Rational SOFC material design: new advances and tools10.1016/S1369-7021(11)70279-6 ↗
6. High-performance SOFC cathodes prepared by infiltration10.1002/adma.200802428 ↗
7. Recent progress in SOFC anodes for direct utilization of hydrocarbons10.1039/b702633a ↗
8. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
9. First-principles investigation on redox properties of m-doped CeO2 (m = Mn, Pr, Sn, Zr)10.1103/PhysRevB.82.125104 ↗
10. First-principles investigation of transition metal atom m (m = Cu, Ag, Au) adsorption on CeO2(110)10.1039/c2cp22720g ↗
11. Oxygen self-diffusion and surface exchange studies of oxide electrolytes having the fluorite structure10.1016/S0167-2738(96)00514-0 ↗
12. Combined electrochemical and X-ray tomography study of the high temperature evolution of Nickel-Yttria Stabilized Zirconia solid oxide fuel cell anodes10.1016/j.jpowsour.2015.12.126 ↗
13. Microstructure degradation of cermet anodes for solid oxide fuel cells: quantification of nickel grain growth in dry and in humid atmospheres10.1016/j.jpowsour.2010.08.017 ↗
14. Degradation of anode supported SOFCs as a function of temperature and current load10.1149/1.2193400 ↗
15. Helmick · 2010
16. Microstructure degradation of LSM-YSZ cathode in SOFCs operated at various conditions10.1016/j.ssi.2011.10.020 ↗
17. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells10.1016/S0167-2738(00)00650-0 ↗
18. Electrical conductivity of Ni–YSZ composites: variants and redox cycling10.1016/j.ssi.2012.06.021 ↗
19. Experimental and theoretical investigation of degradation mechanisms by particle coarsening in SOFC electrodes10.1002/fuce.200800192 ↗
20. Time-dependent performance changes in LSCF-infiltrated SOFC cathodes: the role of nano-particle coarsening10.1016/j.ssi.2011.02.003 ↗
21. Phase wettability and microstructural evolution in solid oxide fuel cell anode materials10.1016/j.actamat.2014.06.037 ↗
22. H.-Y. Chen, H.-C. Yu, J. S. Cronin, J. R. Wilson, S. A. Barnett, K. Thornton, Ni coarsening in the three-phase solid oxide fuel cell anode–a phase-field simulation studyarXiv:1201.1567.
23. Simulation of coarsening in three-phase solid oxide fuel cell anodes10.1016/j.jpowsour.2010.08.010 ↗
24. Multi-scale solid oxide fuel cell materials modeling10.1007/s00466-009-0402-7 ↗
25. Connecting microstructural coarsening processes to electrochemical performance in solid oxide fuel cells: an integrated modeling approach10.1016/j.jpowsour.2013.10.121 ↗
26. Three-dimensional microstructural changes in the Ni–YSZ solid oxide fuel cell anode during operation10.1016/j.actamat.2012.02.041 ↗
27. Phase-field modeling of three-phase electrode microstructures in solid oxide fuel cells10.1063/1.4738230 ↗
28. Phase field modeling of microstructure evolution of electrocatalyst-infiltrated solid oxide fuel cell cathodes10.1063/1.4908281 ↗
29. Simulation of the reduction process of solid oxide fuel cell composite anode based on phase field method10.1016/j.jpowsour.2015.11.061 ↗
30. Z. Jiao, T. Shimura, N. Shikazono, Numerical assessment of SOFC anode polarization with microstructure evolution, ECS Transactions 68(1) (2015) 1281–1289. arXiv:http://ecst.ecsdl.org/content/68/1/1281.full.pdf+html, doi:10.1149/06801.1281ecst. URL http://ecst.ecsdl.org/content/68/1/1281.abstract.10.1149/06801.1281ecst ↗
31. Iterative spectral method for solving electrostatic or magnetostatic problems in complex and evolving heterostructures10.1103/PhysRevE.91.053307 ↗
32. Quantitative phase-field approach for simulating grain growth in anisotropic systems with arbitrary inclination and misorientation dependence10.1103/PhysRevLett.101.025502 ↗
33. Phase field approach to heterogeneous crystal nucleation in alloys10.1103/PhysRevB.79.014204 ↗
34. Multiphase phase field theory for temperature-induced phase transformations: formulation and application to interfacial phases10.1016/j.actamat.2015.12.013 ↗
35. Observing the microstructural evolution of Ni-Yttria-stabilized zirconia solid oxide fuel cell anodes10.1016/j.actamat.2015.09.055 ↗
36. Efficient numerical algorithm for multiphase field simulations10.1103/PhysRevE.73.016703 ↗
37. Computer simulations of two-dimensional and three-dimensional ideal grain growth10.1103/PhysRevE.74.061605 ↗
38. DREAM.3D: a digital representation environment for the analysis of microstructure in 3D
39. Phase-field model for isothermal phase transitions in binary alloys10.1103/PhysRevA.45.7424 ↗
40. Surface and grain-boundary energies in yttria-stabilized zirconia (YSZ-8 mol%)10.1007/BF01159310 ↗
41. The equilibrium crystal shape of nickel10.1016/j.actamat.2011.02.021 ↗
42. Grain boundary width, energy and self-diffusion in nickel: effect of material purity10.1016/j.actamat.2013.05.010 ↗
43. Ni–YSZ(111) solid–solid interfacial energy10.1007/s10853-013-7960-y ↗
44. Shewmon · 1991
45. Cation inter-diffusion between LaMnO3 and LaCoO3 materials10.1016/j.ssi.2011.09.003 ↗
46. M. Kilo, M. Taylor, C. Argirusis, G. Borchardt, R. Jackson, O. Schulz, M. Martin, M. Weller, Modeling of cation diffusion in oxygen ion conductors using molecular dynamics, Solid State Ionics 175(14) (2004) 823–827, fourteenth International Conference on Solid State Ionics. http://dx.doi.org/10.1016/j.ssi.2004.09.059. URL http://www.sciencedirect.com/science/article/pii/S0167273804006575.10.1016/j.ssi.2004.09.059 ↗
47. Sintering and grain growth kinetics in La0.85Sr0.15MnO3–Ce0.9Gd0.1O1.95 (LSM–CGO) porous composite10.1016/j.jeurceramsoc.2014.04.044 ↗
48. Grain growth phenomena in nickel10.1016/0956-716X(94)90498-7 ↗
49. Gottstein · 1999
50. Electrical conductivity of single crystal and polycrystalline yttria-stabilized zirconia10.1007/BF00550246 ↗
51. Ionic conduction in nanocrystalline materials10.1016/S0167-2738(00)00629-9 ↗
52. Towards the 3D modeling of the effective conductivity of solid oxide fuel cell electrodes – II. computational parameters10.1016/j.ces.2014.05.045 ↗
53. Low-temperature sintering of lanthanum strontium manganite-based contact pastes for SOFCs10.1016/j.jpowsour.2008.01.097 ↗
54. Computer simulation of the domain dynamics of a quenched system with a large number of nonconserved order parameters: the grain-growth kinetics10.1103/PhysRevB.50.15752 ↗
55. Phase-field simulation of 2-D Ostwald ripening in the high volume fraction regime10.1016/S1359-6454(01)00393-7 ↗
56. Diffusion-controlled grain growth in two-phase solids10.1016/S1359-6454(97)00022-0 ↗
57. Towards the 3D modelling of the effective conductivity of solid oxide fuel cell electrodes–validation against experimental measurements and prediction of electrochemical performance10.1016/j.electacta.2015.04.005 ↗
58. Reconstruction of solid oxide fuel cell electrode microstructure and analysis of its effective conductivity10.1007/s11434-015-0946-1 ↗
59. Resolving the three-dimensional microstructure of polymer electrolyte fuel cell electrodes using nanometer-scale X-ray computed tomography10.1002/adfm.201101525 ↗
60. Y.-c. K. Chen-Wiegart, D. Kennouche, J. Scott Cronin, S. A. Barnett, J. Wang, Effect of Ni content on the morphological evolution of Ni-YSZ solid oxide fuel cell electrodes, Appl. Phys. Lett. 108(8). http://dx.doi.org/10.1063/1.4942459. URL http://scitation.aip.org/content/aip/journal/apl/108/8/10.1063/1.4942459.10.1063/1.4942459 ↗
61. Sintering behavior of Ni/Y2O3–ZrO2 cermet electrodes of solid oxide fuel cells10.1023/A:1025936317472 ↗
62. J. R. Wilson, J. S. Cronin, S. A. Barnett, Linking the microstructure, performance and durability of Ni-yttria-stabilized zirconia solid oxide fuel cell anodes using three-dimensional focused ion beamscanning electron microscopy imaging, Scripta Materialia 65(2) (2011) 67–72, viewpoint set no. 48: Solid Oxide Fuel Cells. http://dx.doi.org/10.1016/j.scriptamat.2010.09.025. URL http://www.sciencedirect.com/science/article/pii/S1359646210006433.10.1016/j.scriptamat.2010.09.025 ↗
63. Impact of pore microstructure evolution on polarization resistance of Ni-Yttria-stabilized zirconia fuel cell anodes10.1016/j.jpowsour.2010.10.084 ↗
64. Electrical conductivity of Ni–YSZ composites: degradation due to Ni particle growth10.1016/j.ssi.2011.02.001 ↗
65. The influence of constrictivity on the effective transport properties of porous layers in electrolysis and fuel cells10.1007/s10853-012-6968-z ↗
66. Effect of grain boundary width on grain growth in a diffuse-interface field model10.1016/S0921-5093(97)00437-1 ↗
67. Phase-field simulation of solidification10.1146/annurev.matsci.32.101901.155803 ↗